TUSB8041RGCT vs TUSB8041ARGCT Comparaison
Comparaison détaillée côte à côte de TUSB8041RGCT par Texas Instruments et TUSB8041ARGCT par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TUSB8041ARGCT - 4-Port USB 3.1 Gen1 Hub Controller | Texas Instruments
TUSB8041ARGCT ✓ ActifComparaison des spécifications
| Paramètre | TUSB8041RGCT | TUSB8041ARGCT |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Four-port USB 3.0 hub controller | — |
| Number of Downstream Ports | 4 ports | 4 |
| SuperSpeed Maximum Data Rate | 5 Gbps | — |
| Supported USB Speeds | SuperSpeed USB, high-speed USB, and full-speed USB | — |
| Upstream Port Speed Support | Simultaneous SuperSpeed USB, high-speed USB, and full-speed USB connections | — |
| Digital Control Interfaces | GPIO, I2C, and SMBus | — |
| 3.3 V Supply Range | 3 V to 3.6 V | — |
| Low-Voltage Supply Range | 0.99 V to 1.26 V | — |
| Battery Charging Protocol | BC1.2 protocol support | — |
| Downstream Port Power Control | Downstream port power-switch control | — |
| Protection contre les surintensités | Supported | — |
| Boîtier | 64-pin VQFN (RGC), 9 x 9 mm | 64-pin VQFN (RGC) 9x9 mm with exposed thermal pad |
| Type de montage | Surface mount | Surface Mount |
| Integrated Exposed Pad | 64-pin VQFN with exposed pad | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial) |
| Maximum USB Data Rate | 5 Gbps | — |
| Number of Upstream Ports | 1 port | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Fonction | — | 4-Port SuperSpeed USB 3.1 Gen1 Hub Controller |
| USB Standard | — | USB 3.1 Gen1 / USB 3.0 (5 Gbps SuperSpeed, plus USB 2.0 LS/FS/HS) |
| Upstream Interface | — | 1x USB 3.1 Gen1 (Type-A or Type-C receptacle) |
| Data Rate (SuperSpeed) | — | 5 Gbps |
| Data Rate (High-Speed) | — | 480 Mbps |
| Configuration Interface | — | GPIO, I2C, SMBus, OTP ROM, I2C EEPROM |
| Supply Voltage (VBUS / VDD) | — | 3.3 V (single rail; internal 1.1 V core LDO) |
| Battery Charging Support | — | Yes (per-port detection via pin strap or EEPROM) |
| External Crystal | — | 24 MHz |
| Niveau MSL | — | 3 (168 hours) |
| Lead-Free | — | Yes |