ADC/DAC
Produkte (2364)
TLV2545IDGKRG4 - 12-Bit 200kSPS Serial ADC, MSOP-8 | Texas Instruments
The Texas Instruments TLV2545IDGKRG4 is a 12-bit, 200 kSPS, low-power, serial-interface analog-to-digital converter (ADC) using successive-approximation architecture in an 8-pin MSOP (DGK) PowerPAD package. It operates from a single 2.7 V to 5.5 V analog supply, supports a single pseudo-differential analog input, and includes a built-in conversion clock, an SPI/DSP-compatible serial interface up to 10 MHz, and an Auto-Power-Down mode that reduces current consumption to under 1 µA between conversions. An ADC (analog-to-digital converter) of this type is a precision data converter that quantifies an analog input voltage into a binary code. The TLV2545 belongs to the successive-approximation register (SAR) ADC family — a sub-class of general-purpose, low-latency converters — within the broader data-converter hierarchy of ADC/DAC ICs. SAR ADCs are favored when deterministic latency, simple serial interfacing, and low power dissipation are required, making them a common choice over delta-sigma ADCs for multiplexed or control-loop applications. Key features include ±1 LSB maximum INL and DNL, 72 dB SINAD, 85 dB SFDR at a 20 kHz input, 3.5 µs conversion time, Auto-Power-Down that activates at end-of-conversion, and TMS320-compatible serial output. The DGK MSOP-8 with PowerPAD provides a low thermal-resistance path, enabling reliable operation across the industrial -40 °C to +85 °C temperature range. The TLV2545 uses charge-redistribution SAR architecture with an internal sample-and-hold and a precision DAC. The integrated Auto-Power-Down dynamically reduces consumption to sub-microamp levels between conversions, allowing the part to serve battery-powered, event-driven, or polled systems without the overhead of an external analog switch. Typical applications include portable instrumentation and battery-powered sensors, industrial process control loops, multi-channel data-acquisition front-ends, digital signal processor (DSP) and microcontroller analog front ends, optical-networking monitoring, and touch-screen or panel-metering subsystems. When designing with this ADC, place the 1.5 nF CS capacitor and 10 µF bypass capacitor close to the supply pins, route the analog and digital grounds in a star or split-plane topology, and ensure the reference decoupling (REF decoupling capacitor) is short and noise-free. The internal oscillator and Auto-Power-Down mean no external clock is required for stand-alone operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB-layout design notes that go beyond the manufacturer datasheet.
TLV5580IPWG4 - 8-Bit 80 MSPS Low-Power ADC | Texas Instruments
The Texas Instruments TLV5580IPWG4 is an 8-bit, 80 MSPS low-power analog-to-digital converter (ADC) with a pipelined architecture, housed in a 28-pin TSSOP (PW) package rated for the industrial -40C to +85C temperature range. The part delivers 700 MHz typical analog input bandwidth, internal top/bottom reference voltages, and an adjustable full-scale reference input for flexible system calibration. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples a continuous analog waveform and produces a discrete binary code proportional to the input amplitude. The TLV5580 belongs to the pipelined ADC family, which sits in the hierarchy: ADC -> data converter -> data acquisition IC -> mixed-signal semiconductor. Pipelined ADCs use multiple low-resolution stages to achieve high sample rates at modest power, making them a standard choice for IF-sampling communications, CCD imaging, and digital oscilloscope front ends. Key features of the TLV5580 include 80 MSPS maximum sampling rate, single 3.3 V supply operation, 3.3 V TTL/CMOS-compatible digital I/O that simplifies interface to modern FPGAs and ASICs, an internal bottom-plate reference that reduces external component count, and an adjustable reference input for gain trim. The 700 MHz analog input bandwidth supports undersampling architectures where the ADC digitizes IF frequencies well above Nyquist. The 28-TSSOP (PW) footprint is pin-compatible across the broader TLV/TLC ADC family from Texas Instruments. Architecturally the device uses a multi-stage pipeline with internal sample-and-hold and digital error correction. The combination of 80 MSPS and 8-bit resolution keeps per-conversion power low (single-digit mA from a 3.3 V rail), which is the original design target: applications where the ADC must sit on the same board as noisy digital logic without dominating the power budget. The TLV5580 has been replaced by the ADS831 in TI's portfolio but remains specified and available for legacy designs. Typical applications include CCD imaging digitizers, video capture front ends, IF-sampling communications receivers, portable battery-powered instrumentation, and digital oscilloscope input stages. In each case the part provides a compact, low-power, single-supply path from analog to digital. When designing with the TLV5580, decouple AVDD and DVDD separately close to the package and follow standard pipelined-ADC layout practice: keep analog input traces short, use a ground plane under the analog input, and provide a clean 3.3 V rail. The PW suffix indicates tube packaging; the device is also offered in tape and reel as TLV5580IPWR.
TLV5617A - Dual 10-Bit DAC, 2.7-5.5V | Texas Instruments
The TLV5617A is a dual 10-bit voltage output digital-to-analog converter (DAC) from Texas Instruments, designed for low-power and space-constrained applications. It operates from a single 2.7V to 5.5V supply and features a flexible 3-wire serial interface compatible with TMS320, SPI, QSPI, and Microwire serial ports. The device is available in an 8-pin SOIC package (TLV5617AID) and includes a power-down mode to conserve energy. A digital-to-analog converter (DAC) is an electronic circuit that converts digital binary data into an analog voltage or current. The TLV5617A is a voltage-output DAC, meaning it produces a voltage proportional to the digital input. It is part of the broader family of data converters, which are essential in mixed-signal systems where digital processing must interface with the analog world. DACs are used in applications such as audio playback, motor control, and sensor calibration. Key features of the TLV5617A include dual 10-bit resolution, programmable settling time (fast mode: 3 µs, slow mode: 10 µs), and a rail-to-rail output buffer with Class-AB stage. The device also offers a power-down mode that reduces quiescent current to 1 µA, making it ideal for battery-powered equipment. The serial interface accepts a 16-bit word consisting of 4 control bits and 10 data bits, allowing flexible configuration. The TLV5617A uses a resistor-string architecture with a x2 gain rail-to-rail output buffer, ensuring low glitch energy and monotonic performance. The output buffer can drive capacitive loads up to 100 pF without external compensation. The device is specified over the industrial temperature range of -40°C to +85°C and is RoHS compliant. Typical applications include programmable voltage sources, digital gain and offset adjustment, and industrial process control. The low power consumption and small package make it suitable for portable instrumentation and battery-powered devices. The serial interface simplifies connection to microcontrollers and DSPs, reducing board space and pin count. When designing with the TLV5617A, ensure that the reference voltage is stable and bypassed with a 0.1 µF capacitor. The power supply should be decoupled with a 1 µF capacitor close to the VDD pin. The serial clock frequency should not exceed 20 MHz to maintain reliable communication.
TLV5627IPW - 8-Bit Quad DAC, Serial, TSSOP-16 | Texas Instruments
The Texas Instruments TLV5627IPW is a quad-channel, 8-bit voltage-output digital-to-analog converter (DAC) with a flexible 4-wire serial interface, packaged in a 16-pin TSSOP (PW) and operating from a 2.7V to 5.5V supply. Each of the four DAC channels features programmable settling time of either 2.5 µs (fast mode) or 8.5 µs (slow mode) and supports a 107 kSPS update rate, enabling both precision setpoint generation and waveform synthesis from a single chip. A digital-to-analog converter (DAC) is a mixed-signal integrated circuit that converts a digital codeword into a precision analog voltage or current; an 8-bit quad DAC like the TLV5627 delivers four such converters on one die with a shared digital interface, sitting within the broader hierarchy of converter ICs > data converters > signal chain > mixed-signal semiconductors. Unlike audio DACs that target continuous high-rate streaming, the TLV5627 is an industrial/multi-channel "set DAC" intended for bias voltages, trim references, programmable gain stages, and actuator control loops where four independent low-bandwidth analog outputs are required. Key features include a glueless serial interface compatible with TMS320 DSP, SPI, QSPI, and Microwire ports, an on-chip reference input buffer, hardware and software-controlled power-down modes that cut consumption to a few milliwatts, and guaranteed monotonic output over the full -40C to +85C industrial temperature range. The four outputs share a common DAC reference, but each channel can be powered down independently for further energy savings. Internally, the TLV5627 uses a resistor-string architecture with an output buffer amplifier per channel, providing low output impedance and the ability to drive 2 kohm loads directly. The dual-supply design separates the digital and analog domains (separate AVDD and DVDD pins), which is critical for noise-sensitive applications where digital switching transients must be isolated from the analog outputs. Typical applications include industrial process control (PLC analog outputs), programmable sensor excitation, digital offset and gain trimming, four-channel waveform or bias generation in test & measurement, motor and valve control loops, and audio tone/signal generation where mid-fidelity is acceptable. When designing with this device, ensure the AGND and DGND pins are joined at a single low-impedance point near the IC to prevent digital return currents from corrupting analog output accuracy. The reference input must be driven from a low-noise source, and the unused DAC outputs can be left open or tied to a defined voltage. Programming model: load data through the serial port (DIN, SCLK, FS) per the TI TLV5627 datasheet timing diagram. This page consolidates real-time distributor pricing, drop-in compatible alternatives, and practical PCB/design notes beyond what the manufacturer datasheet alone provides.
TLV5734PAGG4 - Triple 8-Bit 30MSPS ADC for YUV/RGB Video | TI
The Texas Instruments TLV5734PAGG4 is a triple-channel 8-bit 30 MSPS analog-to-digital converter (ADC) with integrated high-precision input clamps, optimized for digitizing YUV/RGB video signals. Housed in a 64-pin TQFP (PAG) package, the device operates from a single 3.3 V supply and features a parallel CMOS digital interface. According to the manufacturer datasheet, the device provides three simultaneous 8-bit conversions at sample rates up to 30 MSPS, with on-chip 3-channel sampling, programmable gain, and clamp circuitry designed specifically to interface directly to DC-coupled video sources such as RGB/YPbPr component video or Y/C composite video. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples continuous analog voltage levels and converts them into discrete digital codes at a defined sample rate, enabling downstream processing in DSPs, ASICs, or FPGAs. Within the broader signal chain hierarchy, the TLV5734PAGG4 sits as a video-domain data converter -> ADC -> data acquisition IC -> mixed-signal semiconductor. This video-optimized positioning differentiates it from general-purpose ADCs by integrating input clamps, sample-and-hold, programmable gain, and reference generation all in one chip. Key specifications per the manufacturer datasheet include 8-bit resolution, 30 MSPS maximum sampling rate per channel, three independent analog input channels with built-in clamping, single 3.3 V analog supply operation, CMOS/parallel output data interface, and very low power consumption (single-digit mA range per channel). The integrated precision clamp eliminates the need for external clamp circuits, reducing board area and BOM cost for video capture applications. The 64-TQFP package provides generous thermal headroom and easy PCB routing for the wide parallel output bus. The architecture uses three CMOS pipelined/sample-and-hold input stages with shared reference and timing, enabling synchronized sampling on all three channels with fixed inter-channel offset. Inputs accept standard video levels (0.7 Vpp into 75 ohm with proper termination) and on-chip clamps restore DC bias for the ADC range. The single 3.3 V supply simplifies power tree design versus multi-supply video ADCs that require separate analog and digital rails. Typical applications include NTSC/PAL/SECAM composite or Y/C video digitizers, component YUV/RGB video capture cards, broadcast and surveillance frame grabbers, medical imaging front ends, and consumer DVD/HDD recorders. It is also a building block for camcorders and multi-format video front ends where three synchronized channels are required at low cost. When designing with the TLV5734PAGG4, provide a clean 3.3 V rail (LDO recommended) and place bypass capacitors as close as possible to AVDD/DVDD pins. Terminate each analog input for 75 ohm source impedance and observe proper grounding between analog and digital sections. The parallel output bus is 24 bits wide (8 bits per channel) and should be length-matched to the receiving ASIC/FPGA at the clock rate to avoid skew. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet itself, including a curated alternatives list that satisfies v3.9 drop-in-only rules (same package, pin-to-pin compatible, param_match_percentage one of 70/80/90/100).
TS7003ITD833 - 12-Bit 300ksps SAR ADC, 2.5V Ref, TDFN-8 | Silicon Labs
The Silicon Labs TS7003ITD833 is a 12-bit, 300 ksps successive-approximation analog-to-digital converter (ADC) with a single-ended single-channel input, integrated +2.5V reference, and a high-speed serial digital interface, packaged in an 8-pin TDFN (3x3 mm) with exposed pad for thermal and ground integrity. Designed for single-supply operation from +2.7V to +3.6V, it draws less than 1 mA at full 300 ksps conversion rate. An ADC in this product category is a mixed-signal data converter that translates real-world analog voltages into discrete digital codes. The successive-approximation register (SAR) architecture family uses a binary-search algorithm with an internal track-and-hold front end, achieving a balance of speed, accuracy, and low power consumption suitable for embedded sensing, instrumentation, and process-control front-ends. This part sits within the broader hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. Its integrated reference removes an external component and reduces board area, an important benefit for compact sensor-interface designs. Key features include 12-bit resolution, 300 ksps throughput, a high-bandwidth input track-and-hold amplifier, and an internal +2.5V reference. The serial interface reduces pin count compared to parallel-output ADCs, simplifying routing and host-MCU connection. Low conversion-mode power consumption and an industrial temperature range support battery-aware and factory-floor deployments alike. The TS7003ITD833 successive-approximation architecture implements a charge-redistribution DAC internally, capturing input samples on the T/H at the rising edge of CNVST and presenting results one frame later through the SPI-compatible serial port. The integrated reference and single-supply rail minimizes external component count, while the 8-pin TDFN EP package provides a low-impedance thermal/ground path that enhances noise immunity at full throughput. Typical applications include industrial process-control analog front-ends, portable battery-powered data loggers, sensor-signal digitizers, weigh-scale and load-cell readouts, and microcontroller-based instrumentation. Use it where channel count is small, sampling rate is moderate, and PCB real estate is at a premium. When designing with this ADC, place the decoupling capacitor directly between AVDD and GND, keep analog and digital ground returns separated until they join at the exposed pad, and respect the tACQ acquisition-time timing parameter when writing firmware. Driving the analog input from a low-impedance buffer maintains data-sheet linearity at high source resistances. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet to help procurement and design engineers evaluate the TS7003ITD833 for new designs and second-source risk mitigation.
TSA1005-40IFT - 10-Bit 40MSPS Dual ADC | STMicroelectronics
The STMicroelectronics TSA1005-40IFT is a dual-channel, 10-bit resolution analog-to-digital converter (ADC) based on a pipelined architecture, sampling up to 40 MSPS in a 48-pin TQFP (7x7 mm) package. It uses a 0.25 µm deep sub-micron CMOS process, operates from a single 2.5 V analog supply, and supports an independent 2.5 V or 3.3 V CMOS output supply. A pipelined ADC is a high-speed converter architecture that resolves an analog input across multiple cascaded low-resolution stages, each driving a sample-and-hold amplifier and a flash sub-ADC. The pipeline allows new conversions to begin every clock cycle, achieving sample rates well above 100 MSPS while keeping per-stage hardware compact. Pipelined ADCs sit within the broader taxonomy: data converter -> ADC -> high-speed ADC -> pipelined ADC -> integrated circuit -> semiconductor. The TSA1005 belongs to a category often called "baseband IF sampling ADCs," used when analog signals need to be digitized near the antenna or sensor for downstream DSP. Key specifications include 1 GHz analog input bandwidth, an integrated track-and-hold amplifier per channel, common clocking for synchronous dual-channel sampling, and a multiplexed digital output mode. The device targets applications needing a low noise floor and high SFDR; SFDR (Spurious-Free Dynamic Range) measures how far the largest spurious tone sits below the fundamental when digitizing a pure sine wave, with higher values meaning cleaner spectra. The TSA1005 is engineered for very low noise floor, high SFDR, and good channel-to-channel isolation. Typical applications include medical ultrasound imaging, professional video processing, IF (intermediate frequency) sampling for communications receivers, instrumentation, and industrial non-destructive testing. Each application relies on the part's combination of 10-bit resolution at video-grade sample rates and dual-channel synchronous capture. When designing with this part, decouple both the 2.5 V analog and 2.5/3.3 V digital rails with 100 nF ceramic capacitors placed as close as possible to each supply pin. Route the analog inputs as 50 Ω controlled-impedance traces with the analog ground plane isolated from the digital return to minimize coupling. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone. Information current as of 2026-10-15.
TSA1203IF - Dual 12-bit 40MSPS ADC | STMicroelectronics
The STMicroelectronics TSA1203IF is a dual-channel, 12-bit, 40 MSPS analog-to-digital converter fabricated in a mainstream 0.25 µm CMOS process, housed in a 48-pin TQFP (7x7 mm) package. It integrates two simultaneous sample-and-hold amplifiers, a 1 GHz analog input bandwidth, and a built-in reference voltage, dissipating 230 mW at 40 Msps from a single 2.5 V supply. The CMOS output stage can be driven from an independent 2.5 V or 3.3 V rail, simplifying interfacing to both legacy and modern FPGA/ASIC logic families. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts a continuous-time, continuous-amplitude analog input into a discrete-time, discrete-amplitude digital code. Pipeline ADCs such as the TSA1203IF use a multi-stage switched-capacitor architecture to achieve high sampling rates while keeping per-stage power and die area modest, sitting within the broader hierarchy of data converters -> ADC -> high-speed pipeline ADC -> semiconductor. Dual-channel variants like this one are favored for diversity receivers, I/Q baseband sampling, and simultaneous multi-antenna digital beamforming because the two channels are sampled on a common clock edge, eliminating channel-to-channel skew. Key features include 1 GHz analog input bandwidth, SFDR of -68.3 dBc at 10 MHz input, multiplexed outputs for reduced pin count, common clocking between channels, and pin-to-pin compatibility with the dual 10-bit 20/40 MSPS TSA1005-20/40 and the dual 12-bit 20 MSPS TSA1204. The pipelined architecture combined with digital error correction yields clean 12-bit outputs at full clock rate without requiring complex external calibration at room temperature. Typical applications include cellular base station receivers, IF sampling for software-defined radio, medical imaging front-ends, and industrial ultrasound beamformers. The integrated reference and dual independent input channels also suit multi-channel data-acquisition cards for test and measurement instrumentation. When designing with this part, ensure the analog and digital grounds are joined only at a single point near the exposed pad, and that the analog supply is decoupled with both 0.1 µF ceramic and 10 µF bulk capacitance within 5 mm of the supply pins.
TSA1204IFT - 12-Bit 20MSPS Dual-Channel ADC | STMicroelectronics
The STMicroelectronics TSA1204IFT is a 12-bit resolution, dual-channel pipelined Analog-to-Digital Converter sampling up to 20 MSPS, packaged in a 48-pin TQFP (7x7 mm). The device operates from a single 2.5 V analog supply with an independent 2.5 V/3.3 V CMOS output stage supply, consuming only 95 mW per channel at 20 MSPS and scaling down adaptively at lower sampling rates. An Analog-to-Digital Converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes at a specified sampling rate. Dual-channel pipelined ADCs belong to the broader hierarchy of data converter IC -> mixed-signal IC -> semiconductor, and they occupy the performance tier between successive-approximation (SAR) converters (slow, low-power, <5 MSPS) and high-speed flash converters (very fast, very high power). The TSA1204IFT targets moderate-bandwidth multi-channel systems where engineers need two synchronized channels without the cost of two discrete ADCs. Key features include a 1 GHz analog input bandwidth, an integrated Track-and-Hold amplifier, 11.2-bit effective number of bits (ENOB) at the Nyquist input frequency, and -81.5 dBc spurious-free dynamic range (SFDR) at Nyquist. The 0.25 micrometer CMOS process enables adaptive power consumption scaling from 0.5 MSPS to 20 MSPS, allowing the part to drop to lower power in standby. The CMOS outputs are pin-selectable between 2.5 V and 3.3 V logic levels, simplifying interface to FPGAs, ASICs, or microcontrollers in mixed-voltage systems. Typical applications include dual-channel digital oscilloscopes, intermediate-frequency (IF) signal processing in communications receivers, ultrasound imaging front-ends, and high-speed industrial data acquisition. The dual channel allows simultaneous sampling of in-phase and quadrature (I/Q) baseband signals, or two channels of a multi-channel instrumentation system. When designing with the TSA1204IFT, place the analog and digital ground returns on a split ground plane joined under the ADC, use wide PCB traces for the analog supply pins, and decouple each supply pin with 100 nF and 10 uF capacitors placed as close as possible to the device. The exposed pad of the TQFP should be soldered to a ground plane for thermal and electrical performance. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not collected in any single manufacturer datasheet revision, giving engineers a one-stop reference for sourcing and second-sourcing the TSA1204IFT.
TSA1401IF - 14-bit 20MSPS 85mW ADC | STMicroelectronics
The STMicroelectronics TSA1401IF is a 14-bit, 20 MSPS pipelined analog-to-digital converter that consumes only 85 mW at full sampling rate. Housed in a 48-pin TQFP (7x7 mm) package, the part targets low-power imaging and instrumentation applications where conventional 14-bit ADCs exceed the system thermal budget. According to the STMicroelectronics datasheet, the TSA1401IF implements ST's OPTIMWATT architecture to dynamically scale internal bias currents with clock rate, enabling designers to lower the sampling clock for slower channels and reduce overall system power. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that quantizes a continuous-time analog input into a discrete N-bit binary code at a programmable sample rate. TSA1401IF sits in the high-speed, mid-resolution segment of the ADC taxonomy (ADC -> pipelined ADC -> high-speed ADC -> data converter -> mixed-signal IC). Pipelined ADCs use multiple low-resolution flash stages interleaved with residue gain and digital correction to achieve both high conversion rate and moderate resolution; this architecture dominates the 10-100 MSPS / 10-14 bit space used in CCD imaging, ultrasound front ends, and digital oscilloscope channels. Key specifications include 14-bit resolution, 20 MSPS maximum sample rate, 85 mW typical power dissipation at full speed, single 5 V analog supply, single +3 V to +5 V digital supply, 48-pin TQFP (7x7 mm) package, industrial temperature range (-40 C to +85 C), and an external reference input. The pipelined converter includes self-calibrated digital error correction that typically holds DNL within 0.5 LSB and INL within 1.0 LSB across the industrial temperature range. Differential analog inputs are AC-coupled through on-chip clamp protection, supporting full-scale ranges from 1 Vp-p to 2 Vp-p driven by op-amp or transformer front ends. Typical applications include high-end infrared imaging for surveillance and thermography, X-ray medical imaging front ends, professional CCD camera front ends for broadcast and industrial vision, document scanners and digital copiers, and test instrumentation including digital storage oscilloscopes and arbitrary waveform recorders. Designers value the TSA1401IF in battery-powered portable imaging systems where total BOM power directly limits field runtime. When designing with the TSA1401IF, the analog input must be driven from a low-impedance differential source; designers typically use a transformer (for single-ended to differential conversion) or a fully-differential op-amp such as the THS4503. Decoupling must include 10 uF tantalum plus 100 nF ceramic on each supply pin, placed within 5 mm of the package. The clock line should be routed with 50 ohm controlled impedance and kept away from analog signal traces. This page synthesizes distributor pricing, identical-footprint drop-in alternatives from the same STMicroelectronics family, and practical layout notes that complement the official datasheet.
TSA7887ARMZ - 12-Bit 125ksps 2-Ch SAR ADC | Silicon Labs
The Silicon Labs TSA7887ARMZ is a 12-bit, 125 ksps, 2-channel successive-approximation register (SAR) analog-to-digital converter with a serial SPI/QSPI/MICROWIRE-compatible output, an internal 2.5V reference, and an 8-pin MSOP package. Originally developed by Touchstone Semiconductor (later acquired and second-sourced by Silicon Labs), the device operates from a 2.7V to 5.25V analog supply and is targeted at low-power instrumentation that demands sub-microamp standby current and 12-bit true conversion precision. An SAR ADC (successive-approximation-register analog-to-digital converter) is a type of data converter that uses a binary-search algorithm against an internal capacitive DAC to resolve an analog input one bit per conversion clock cycle. It belongs to the broad family of analog-to-digital converters (ADCs), which itself is part of the data-converter hierarchy inside mixed-signal and signal-chain integrated circuits. The SAR architecture is favored over delta-sigma and pipeline ADCs when low-latency deterministic conversion, small package size, and moderate sample rates (tens to hundreds of ksps) are required, particularly in multiplexed multi-channel systems. Key features of the TSA7887ARMZ include an internal 2.5V reference (selectable externally via the REF pin), a 2-channel analog input multiplexer, true 12-bit performance with no missing codes, a 125 ksps maximum throughput, low power dissipation (typically under 2.5 mW at 3V/100 ksps), and automatic power-down between conversions that drops supply current below 1 microampere. The device uses an external clock for the serial interface and supports both unipolar single-ended and pseudo-differential input configurations. The device leverages a charge-redistribution SAR core with input transient suppression and an automatic input common-mode settling window, which makes it tolerant of source-impedance variations when channels are switched. Combined with the internal precision reference, this means the TSA7887ARMZ can replace an external ADC + reference + op-amp buffer chain in many space-constrained designs. Typical applications include portable and battery-powered data loggers, industrial process-control sensor front-ends (thermocouple, RTD, strain-gauge bridges), handheld instrumentation, and multiplexed 4-20 mA loop monitors. Designers also use it in optical sensor modules and consumer battery chargers where periodic current/voltage telemetry is required. When designing with this part, size the input RC network and reference bypass capacitors per the datasheet's application circuit - inadequate decoupling is the most common cause of last-2-LSB noise and gain drift in SAR circuits. Consider the MAX1276CTC+ from Maxim's family as a drop-in 8-pin MSOP alternative if higher conversion speed is needed. This page synthesizes distributor pricing, drop-in MSOP-8 alternatives, and practical design notes not found in the manufacturer datasheet alone.
TSA7887ARMZ-REEL - 12-bit 125ksps 2-ch SAR ADC | Silicon Labs
The Silicon Labs TSA7887ARMZ-REEL is a 12-bit, 125 ksps, 2-channel successive-approximation-register (SAR) analog-to-digital converter housed in an 8-pin MSOP package with a single +2.7V to +5.25V supply. The 'RMZ' suffix indicates the MSOP-8 (RM) tape-and-reel (REEL) packaging variant. Originally designed by Touchstone Semiconductor as a pin-compatible second source for the ADI AD7887, the part features an internal +2.5V reference, internal wideband track-and-hold, and serial I/O compatible with SPI, MICROWIRE, QSPI, and DSP ports. Typical supply current is 0.85 mA at full throughput, qualifying the part as a micropower converter for battery and loop-powered systems. A SAR ADC is a successive-approximation-register analog-to-digital converter, a converter topology that uses a binary-search algorithm and a capacitive charge-redistribution DAC to resolve each conversion in N clock cycles for an N-bit result. SAR converters sit in the data-converter hierarchy between flash converters (fastest, lowest resolution) and sigma-delta converters (highest resolution, slowest). They are valued for deterministic latency, low power consumption, and the ability to drive them directly from a microcontroller or DSP serial port without an external reference or high-speed clock. Key features include a 500 ns input track-and-hold acquisition time, an internal +2.5V reference that eliminates external reference components, and a single-ended analog input structure that supports one or two channels multiplexed to the ADC core. Throughput scales with the external serial clock up to 125 ksps at 2 MHz SCLK. The wide supply range allows direct interfacing to 3.3V and 5V microcontrollers, while the small MSOP-8 footprint suits space-constrained sensor readouts and portable instrumentation. Typical applications include transducer and sensor signal conditioning, battery-powered data loggers, industrial process control loops with 4-20 mA interfaces, and portable medical or instrumentation front-ends. The combination of low power, internal reference, and small footprint also suits loop-powered 4-20 mA smart transmitters where every milliwatt and square millimeter matters. When designing with this device, ensure the analog input stays within the input common-mode range specified by the supply, and add a small RC anti-alias filter on each input to limit out-of-band noise folding into the conversion result.
TSA7887ARZ - 12-bit 125ksps 2-ch SAR ADC | Silicon Labs SOIC-8
The Silicon Labs TSA7887ARZ is a micropower, 2-channel, 125-ksps, serial-output 12-bit successive-approximation analog-to-digital converter housed in an 8-pin SOIC (RZ) package. It integrates a precision 2.5V internal reference, supports a single 2.7V to 5.25V analog supply, and consumes only 3.2 mW at 125 ksps with full power-down modes reducing quiescent current to sub-microamp levels. The part accepts true bipolar input ranges via flexible reference configuration. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that samples continuous analog voltages and converts each sample into a discrete digital code for processing by a microcontroller, DSP, or FPGA. Successive-approximation-register (SAR) ADCs use a binary-search algorithm against a precision DAC and reference to resolve one bit per clock cycle, achieving a deterministic conversion time of N cycles for N-bit resolution. This conversion topology sits in the broader hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. SAR ADCs are prized for low latency, deterministic behavior, and absence of pipeline-latency artifacts. Key features include 12-bit resolution with no missing codes, an integrated 2.5V reference, an SPI-/QSPI-/MICROWIRE-compatible serial interface, true-differential analog inputs, software-configurable unipolar/bipolar input ranges, and a hardware-power-down pin. The internal reference can be overdriven with an external source, simplifying ratiometric measurements such as bridge-sensor readings. An on-chip oscillator eliminates the need for an external clock source in cost-sensitive designs. Architecturally, the TSA7887ARZ uses a charge-balancing switched-capacitor DAC front end that converts the input voltage into a digital code across 12 SAR clock cycles. The auto-calibration cycle corrects offset and gain errors on every conversion, eliminating drift across temperature and supply variations. Serial data is clocked out MSB-first and conforms to standard SPI modes, allowing direct connection to most modern microcontrollers without glue logic. Typical applications include portable instrumentation, battery-powered data loggers, industrial process-control loops, sensor conditioning modules, and panel-meter front ends. The low power draw makes it particularly attractive for solar- or energy-harvesting systems where average current budget is critical. The integrated reference and 2-channel mux further reduce total BOM and PCB area in compact designs. When designing with this part, ensure the analog supply is decoupled with a 1uF ceramic plus a 10uF bulk capacitor placed within 5 mm of the AVDD pin. Reference-pin decoupling is equally critical - a 0.1uF ceramic directly across REF should be used. Avoid switching digital traces under the analog front end to preserve SNR. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
TSA7887ARZ-REEL - 12-bit 125ksps 2-ch SAR ADC SOIC-8 | Silicon Labs
The Silicon Labs TSA7887ARZ-REEL is a 2-channel, 12-bit successive-approximation analog-to-digital converter (SAR ADC) with a 125 ksps throughput rate and serial SPI-compatible output, housed in an 8-pin SOIC package. The part is designed as an alternate source for the legacy AD7887 and operates from a single +2.7 V to +5.25 V supply while drawing only 0.85 mA typical supply current, supporting micropower applications. An integrated 2.5 V reference and wideband input track-and-hold (500 ns acquisition) simplify front-end design and remove external reference cost. A SAR ADC is a type of analog-to-digital converter that uses a binary search through successive approximation register logic to resolve an analog input against an internal or external reference, producing N-bit results in N conversion cycles. SAR ADCs excel at medium-to-high resolution (12-18 bit) sampling at moderate speeds (10 ksps to 10 Msps) without the pipeline latency of higher-speed flash or pipelined architectures, making them ideal for multiplexed multi-channel data acquisition systems. Within the data-converter hierarchy, the TSA7887ARZ-REEL sits as a precision ADC -> data converter -> signal chain IC -> mixed-signal semiconductor, combining analog input conditioning, reference generation, and digital serial interface on a single die. Key features include a 125 ksps maximum sampling rate, two single-ended analog input channels multiplexed into one ADC core, an internal 2.5 V reference, a low 0.85 mA supply current, a wide input bandwidth track-and-hold (500 ns), and a serial interface compatible with SPI/QSPI/MICROWIRE. The device accepts bipolar-input-capable front end via simple resistor networks and provides an external reference option when system-level drift compensation is required. The 8-pin SOIC footprint supports standard surface-mount assembly flows. Architecturally, the TSA7887ARZ-REEL uses a charge-redistribution DAC array with successive-approximation register logic clocked from an external serial clock up to 2 MHz. The wideband track-and-hold preserves signal fidelity above the Nyquist limit of the 125 ksps sampling rate, while the integrated reference and input MUX eliminate the external analog conditioning typically required for discrete ADC designs. The serial output reduces pin count versus parallel-output ADCs and simplifies galvanic isolation in industrial systems. Typical applications include portable battery-powered instrumentation, industrial process-control loop monitoring, multi-channel data-logger front ends, sensor-signal conditioning for strain-gauge and thermocouple inputs, and touch-screen / resistive-position decoder interfaces. The low 0.85 mA supply current also suits remote or solar-powered sensor nodes. Where higher throughput is needed, the part's SPI-compatible daisy-chain capability lets two devices share a single serial port. When designing with this device, drive the analog inputs from low-impedance buffers (<= 50 ohm source impedance) to avoid conversion errors caused by the kick-back charge of the internal CDAC array. Bypass VDD with a 0.1 uF ceramic plus 10 uF tantalum placed within 5 mm of the supply pin, and provide a clean analog ground return to keep the integrated reference stable. The throughput scales linearly with external SCLK; a 2 MHz SCLK yields the rated 125 ksps. Note that the TSA7887ARZ-REEL is currently listed as obsolete by Silicon Labs (last-time-buy status), so long-life designs should consider the newer AD7887SRZ-EP equivalent. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
TSA7887BRZ - 12-bit 125kSPS 2-Ch SAR ADC | Silicon Labs
The Silicon Labs TSA7887BRZ is a 12-bit, 125 kSPS, 2-channel successive-approximation-register (SAR) analog-to-digital converter with an integrated 2.5 V internal reference, housed in an 8-pin SOIC package. It operates from a single 2.7 V to 5.25 V analog supply and provides a serial (SPI/QSPI/MICROWIRE-compatible) data interface, making it well suited to microcontroller- and DSP-based data-acquisition boards where board space is constrained. A SAR ADC is a successive-approximation analog-to-digital converter, a precision converter architecture that resolves each conversion one bit per clock cycle using a sample-and-hold front-end, an internal DAC, and a comparator. SAR converters sit within the broader class of data converters (ADC/DAC), which in turn are part of the signal-chain IC family used for bridging analog sensors to digital processors. Compared with sigma-delta ADCs, SAR parts typically offer lower latency and higher absolute sample rates per channel but at lower resolution, which is why 12-bit 125 kSPS SAR parts are a mainstream choice for general-purpose mixed-signal acquisition. Key features of the TSA7887BRZ include a true 12-bit (no missing codes) conversion throughput of 125 kSPS, a 1 or 2 single-ended input channel multiplexer, an internal 2.5 V reference with low drift, a wide 2.7 V to 5.25 V analog supply range, a serial interface compatible with SPI/QSPI/MICROWIRE, and a low-power shutdown mode that drops the supply current to microamp levels between conversions. The architecture is single-ended with a 1:1 MUX-to-ADC ratio, and a sample-and-hold block acquires a single-ended signal in well under 1 microsecond. Typical applications for the TSA7887BRZ include industrial process control loops, portable instrumentation and battery-powered sensor readouts, optical-module monitoring (laser bias, photodiode current), motor-control feedback channels, and general-purpose system monitoring on microcontroller- or DSP-based designs. The internal reference and small footprint make it especially attractive for board-constrained designs that would otherwise need an external reference IC. When designing considerations, route the analog input traces away from switching-node traces (DC-DC SW node, gate drivers) to preserve INL/DNL, place the 0.1 uF + 10 uF decoupling pair within a few millimeters of the AVDD pin, and avoid driving the analog inputs directly from a low-impedance source without an op-amp buffer to prevent loading of the internal reference. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not found on the manufacturer product page, giving engineers a single decision-ready reference.
TSA7887BRZ-REEL - 12-Bit 125kSPS 2-CH SAR ADC | Silicon Labs
The Silicon Labs TSA7887BRZ-REEL is a micropower, 2-channel, 125-kilosamples-per-second (kSPS), 12-bit successive-approximation-register (SAR) analog-to-digital converter (ADC) with a serial output interface, supplied in an 8-pin SOIC (R-8/SOIC-8) package on tape-and-reel packaging. It operates from a single 2.7 V to 5.25 V supply and integrates a wide-bandwidth track-and-hold, an internal +2.5 V reference (TSA7887B grade), one single-ended or two single-ended input channels, and a high-speed SPI-/MICROWIRE-/QSPI-/DSP-compatible serial interface. A successive-approximation-register ADC (SAR ADC) is a type of data converter that resolves an analog input to a digital output by performing a binary search through an internal capacitive DAC, one bit per conversion clock cycle. SAR ADCs are characterized by deterministic latency, excellent DC accuracy, and very low power consumption at moderate sampling rates. Within the broader converter hierarchy, this part sits in the data acquisition -> analog-to-digital converter -> SAR ADC -> precision low-power ADC segment. Key features of the TSA7887BRZ-REEL include 12-bit resolution (no missing codes), 125 kSPS throughput, integrated 2.5 V reference, single-supply 2.7 V to 5.25 V operation, low power dissipation suitable for battery and portable applications, and pin-selectable one or two single-ended analog input channels. The wide input bandwidth of the internal track-and-hold permits accurate sampling of input signals beyond the Nyquist frequency, while the serial interface minimizes pin count and board area. Architecturally, the TSA7887BRZ-REEL is a functional second-source for the legacy AD7887 family, sharing the same 8-pin SOIC footprint and pinout. The internal reference (2.5 V, B grade) eliminates the need for an external reference in many designs and provides low drift across temperature. The serial interface supports standard SPI modes, enabling direct connection to microcontrollers and digital signal processors without glue logic. Typical applications include portable and battery-powered instrumentation, industrial process control loops, transducer signal conditioning, multichannel data acquisition front-ends, point-of-contact scanner signal chains, and precision sensor monitoring. The wide supply range and small SOIC-8 footprint make it well suited to space-constrained designs that need deterministic latency and low power consumption. When designing with this part, place the 0.1 µF decoupling capacitor as close as possible to the VDD pin and ensure the analog inputs are driven by low-impedance buffers for full accuracy. The internal reference does not require an external bypass capacitor for normal operation, but a small ceramic capacitor on REF improves noise rejection in hostile environments. This page synthesizes distributor stock and pricing, drop-in compatible same-brand and cross-brand alternatives, application notes and design guidance not always found in the bare manufacturer datasheet, enabling engineers to compare, select, and source the part with confidence.
TSM1285BCSA+ - 12-Bit 300ksps SAR ADC | Silicon Labs
The Silicon Labs TSM1285BCSA+ is a 12-bit, 300 ksps, single-supply, low-power successive-approximation analog-to-digital converter (ADC) housed in an 8-pin SOIC package. It integrates an internal 2.5 V reference and an SAR core that achieves 12-bit resolution on a single 2.7 V to 3.6 V analog/digital supply. The device is specified across the commercial temperature range -40C to +85C and is sourced from the legacy Touchstone Semiconductor line now carried under the Silicon Labs brand. An SAR (Successive Approximation Register) ADC is a type of data converter that uses a binary-search algorithm against an internal DAC to digitize an analog input in N conversion clock cycles. SAR ADCs sit in the data converter hierarchy between flash converters (fast, expensive, low resolution) and sigma-delta converters (high resolution, slow, dense digital filtering). Because SAR ADCs require no continuous-time oversampling, they are well suited to multiplexed multi-channel acquisition systems, instrumentation loops, and embedded sensor readouts where deterministic latency matters more than extreme dynamic range. Key features include 300 ksps sampling rate, single 2.7 V to 3.6 V supply operation, internal 2.5 V reference, low power consumption, and a serial interface. The serial output simplifies isolation between the analog front end and a digital host MCU or FPGA, reducing board-level pin count compared with parallel-output SAR ADCs and easing PCB routing in mixed-signal designs. The TSM1285BCSA+ uses a charge-redistribution SAR architecture with an internal reference, internal offset calibration, and internal reference-error nulling per the manufacturer datasheet. After full-scale calibration, relative accuracy is specified against the theoretical code transfer function, supporting reliable closed-loop control and instrumentation applications where absolute transfer linearity matters. Typical applications include portable data acquisition systems, industrial process control loops, isolated sensor front ends, motor control current/voltage sense channels, and battery-powered instrumentation. The 2nd-source SOIC-8 footprint and commercial-grade temperature rating make it a flexible part for cost-sensitive mixed-signal designs. When designing with this ADC, ensure the analog input bandwidth does not exceed the device's -3 dB front-end limit; place a small RC anti-alias filter ahead of AIN. Decouple VDD with both bulk and 100 nF ceramic capacitance placed within 5 mm of the supply pin. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster part-selection decisions.
TSM1285BCSA+T - 12-Bit 300ksps SAR ADC w/ 2.5V Ref | Silicon Labs
The Silicon Labs TSM1285BCSA+T is a 12-bit, 300 ksps successive-approximation analog-to-digital converter (SAR ADC) with an internal +2.5 V reference, integrated track-and-hold, and a high-speed serial digital interface, packaged in an 8-pin SOIC (0.154 inch / 3.90 mm body width). It operates from a single +2.7 V to +3.6 V supply and draws less than 2.5 mA at full 300 ksps throughput. The device accepts single-ended analog inputs in the 0 V to VREF range, where VREF can be the internal 2.5 V source or an external reference up to AVDD. A SAR ADC is a precision data-acquisition converter that uses a binary search algorithm and an internal capacitive DAC to compare the sampled input against a reference voltage. It is a sub-category of analog-to-digital converters (ADC), itself a subclass of data-converter ICs within mixed-signal semiconductor devices. SAR ADCs are valued for their deterministic latency (no pipeline delay), low power consumption, and excellent DC accuracy, making them the standard choice for multiplexed data-acquisition systems, instrumentation, and sensor signal chains. Key features include ±1 LSB INL (max) typical linearity, an internal track-and-hold capable of handling input bandwidths up to several MHz, a low conversion-mode power dissipation below 2.5 mA, and a power-down mode that drops quiescent current to microamp levels for battery-powered designs. The serial interface is SPI-/QSPI-/MICROWIRE-compatible, allowing direct connection to most microcontrollers and DSPs without glue logic. Architecturally, the TSM1285BCSA+T combines a high-bandwidth track-and-hold, a charge-redistribution SAR core clocked from an internal oscillator, a low-drift buried-Zener reference (trimmed to ±2%), and a low-noise input buffer. The integrated reference removes a common BOM line, saving PCB area and lowering system cost in precision designs. Typical applications include portable instrumentation and data loggers, pen-digitizers and tablet input systems, loop-powered 4-20 mA sensor digitizers, factory-automation sensor front ends, and battery-monitoring modules for portable equipment. Designers should note that the SHDN pin must be driven logic-high for normal conversion and pulled logic-low for power-down. The internal reference output (REF) requires a 2.2 µF minimum bypass capacitor; values lower than this degrade linearity. Input signals must remain within 0 V to VREF to avoid saturation. This page synthesizes distributor pricing, pin-compatible drop-in alternatives including the Maxim MAX1285BCSA family, and practical design notes that are not consolidated in the manufacturer datasheet, supporting faster component evaluation.
TSM1285BESA+ - 12-Bit 300ksps SAR ADC | Silicon Labs SOIC-8
The Silicon Labs TSM1285BESA+ (originally Touchstone Semiconductor) is a 12-bit, 300 ksps successive-approximation analog-to-digital converter in an 8-pin SOIC package, featuring an internal 2.5 V reference and a serial SPI/QSPI/MICROWIRE-compatible interface. The single-channel, single-ended input converter targets low-power, single-supply data-acquisition applications, including industrial instrumentation, process control, and portable sensor readout. The SAR (Successive Approximation Register) architecture is a class of ADC that performs bit-by-bit comparison using an internal DAC and a comparator, achieving deterministic conversion latency and excellent DC accuracy at moderate sampling rates compared with delta-sigma (which trades speed for higher oversampling resolution) or pipeline ADCs (which need higher clock speeds and consume more power). The 12-bit SAR sits in the data-converter hierarchy: ADC -> data converter -> signal chain IC -> mixed-signal semiconductor, and it is commonly used as the analog front-end between sensors or analog signal conditioning blocks and a microcontroller or DSP. Key features include 300 ksps maximum sampling rate, an internal 2.5 V reference (eliminating an external reference IC and saving PCB area), single 4.5 V to 5.5 V analog supply, low power dissipation suitable for battery and loop-powered systems, software-configurable unipolar/bipolar input range via the reference, and a flexible serial interface that supports SPI, QSPI, and MICROWIRE. The 8-SOIC surface-mount package keeps the part compact for high-density data-acquisition boards. The internal 2.5 V reference is trimmed during manufacture and provides the conversion full-scale; this removes one component from the BOM and simplifies factory calibration. The serial interface reduces pin count (no parallel data bus), enabling direct connection to microcontrollers and DSPs without glue logic, and the wide analog supply tolerance allows operation directly from a regulated 5 V rail or a low-dropout linear regulator output. Typical applications include industrial process control loops, weigh scales, panel meters, temperature and pressure sensor digitizers, portable medical instrumentation, and battery monitoring. The 12-bit resolution suits sensor linearization, threshold detection, and slow closed-loop control, while the 300 ksps rate handles audio-bandwidth and motor-control analog channels. When designing with this device, ensure the analog input does not exceed VDD; add a small RC anti-alias filter ahead of the input pin to limit noise above 150 kHz (half the Nyquist rate). Decouple VDD with a 10 uF tantalum plus 0.1 uF ceramic pair placed within 10 mm of the pin. This page synthesizes distributor pricing, drop-in cross-references (MAX1285BESA from Maxim Integrated is a pin-compatible functional twin in the same SOIC-8 footprint), and practical design notes not found in the manufacturer datasheet alone.
TSM1285BESA+T - 12-Bit 300ksps SAR ADC w/ Int Ref | Silicon Labs
The Silicon Labs TSM1285BESA+T is a 12-bit, 300 ksps successive-approximation analog-to-digital converter with an internal 2.5 V reference, offered in an 8-pin SOIC (SO) package. It provides one single-ended input channel, a serial (SPI/QSPI/MICROWIRE-compatible) interface, and operates from a single 2.7 V to 3.6 V analog and digital supply, drawing approximately 1 mA at full sampling rate. The integrated reference eliminates the need for an external precision reference, reducing BOM cost and board area in space-constrained designs. An SAR (Successive Approximation Register) ADC is a type of analog-to-digital converter that uses a binary-search algorithm against an internal or external reference to digitize an input voltage in N clock cycles, producing one sample per conversion with deterministic latency. ADCs sit within the broader data-acquisition signal chain (sensor -> front-end amplifier -> ADC -> microcontroller/DSP) and serve as the bridge between the analog physical world and digital signal processing. Low-power, single-supply 12-bit SAR ADCs like the TSM1285 are widely deployed in industrial sensors, instrumentation, and embedded monitoring. Key features include 12-bit resolution with no missing codes, a 300 ksps maximum sampling rate, an internal 2.5 V reference, a single-ended analog input, and an SPI-compatible serial output. The device delivers typical INL of +/-1 LSB and operates from -40C to +85C, making it suitable for industrial temperature environments. Low power consumption (~1 mA at 300 ksps) and a power-down mode that reduces current to nanoamp levels enable battery-powered and energy-harvesting applications. Architecturally, the TSM1285 uses a charge-redistribution SAR core with an integrated track-and-hold, a precision bandgap reference, and a serial output shift register. The internal reference is trimmed during manufacture, eliminating external trim components. The serial interface supports SPI, QSPI, and MICROWIRE modes, allowing direct connection to most microcontrollers without glue logic. Conversion is initiated via a chip-select falling edge and the result is clocked out on subsequent SCLK rising edges. Typical applications include industrial process control loop monitoring, portable battery-powered instrumentation, data-acquisition front-ends for sensor signals (temperature, pressure, strain), and embedded control systems. The internal reference simplifies designs that previously required an external reference plus a buffer amplifier. When designing with this part, place a 1 nF to 10 nF ceramic bypass capacitor as close as possible to the VDD pin and a 10 uF bulk capacitor at the supply input. Maintain a quiet analog ground return path; do not share the analog ground return with noisy digital currents. The reference decoupling capacitor (typically 4.7 uF on REF) is critical for AC performance. This page synthesizes distributor pricing, drop-in alternatives (same-brand MAX1285 family first, then cross-brand equivalents), and practical design notes not consolidated in the manufacturer datasheet.
V62/09628-01XB - 10-Bit 8-Ch Low-Power Serial ADC | Maxim
The Maxim Integrated (Analog Devices) V62/09628-01XB is a 10-bit, 8-channel, low-power, serial-interface analog-to-digital converter (ADC) supplied in a 20-pin SSOP (Small Shrink Small Outline Package) with gull-wing leads, qualified to the MILITARY temperature grade. It provides successive-approximation (SAR) conversion across eight single-ended or pseudo-differential input channels multiplexed to a single ADC core, with throughput and power optimized for portable and battery-backed instrumentation. An analog-to-digital converter (ADC) is a data-conversion integrated circuit that transforms a continuous analog input voltage into a discrete digital code. Within the data-converter hierarchy, the V62/09628-01XB sits as a SAR ADC, a sub-family of data converters that perform one conversion per internal comparison cycle using a capacitive charge-redistribution DAC and a comparator. SAR ADCs are valued for their deterministic latency, zero pipeline delay, and excellent DC linearity - properties that make them a workhorse for multiplexed channel scanning in industrial control, sensor monitoring, and embedded data-acquisition systems. Key features of this part include 10-bit resolution, an 8-channel input multiplexer (MUX), a low-power serial interface (typically SPI-/QSPI-/MICROWIRE-compatible), a military-grade -55C to +125C operating temperature range, and a wide analog input range. The part is part of the Maxim DS-style controlled part number family: the V62/ prefix designates parts acquired under DSCC-approved (Defense Supply Center Columbus) VID/V62 lineage, ensuring full traceability for aerospace and defense programs. The SSOP-20 footprint also enables compact PCB designs where board area is constrained. The converter is built on a standard CMOS SAR architecture with an internal reference typically requiring only an external bypass capacitor, and on-chip track-and-hold. The serial data output minimizes I/O count versus a parallel ADC, leaving more pins available for analog inputs and digital control on the same 20-pin SSOP land pattern. Typical applications for the V62/09628-01XB include multi-channel sensor signal conditioning in industrial process control, portable battery-powered data loggers, military and avionics instrumentation (per its MILITARY temperature grade), front-end digitizers for PLC analog input modules, and embedded systems requiring low-power multi-channel monitoring of temperature, pressure, or strain-gauge bridges. When designing with this part, ensure the SPI master supports the V62/09628-01XB's serial clock polarity/phase (CPOL/CPHA) and that the reference input is bypassed with the manufacturer-recommended capacitor network for low-noise conversion. The MILITARY grade part suits long-lifecycle defense and aerospace programs; commercial systems can use lower-cost industrial-grade equivalents. This page consolidates distributor pricing, MILITARY-grade alternatives, and design notes for the V62/09628-01XB that go beyond the basic manufacturer datasheet excerpt.
VSP3200Y - 16-Bit 8MSPS CCD Signal Processor | TI
The Texas Instruments VSP3200Y is a 16-bit, 8 MSPS, 3-channel analog front end (AFE) CCD signal processor with dual output mode, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5V supply. A CCD/CIS analog front end is the mixed-signal stage between an image sensor and a digital image processor. It samples tiny charge-derived pixel voltages, removes reset and kTC noise through correlated double sampling (CDS), amplifies the signal to match the ADC input range, and digitizes it. Within the signal chain hierarchy, the AFE sits between the sensor and the image-signal processor, and is a critical determinant of final image dynamic range and noise floor. Key features include an integrated triple correlated double sampler (CDS), a programmable gain amplifier with up to +13 dB gain, selectable operating modes (1-channel or 3-channel CCD mode at up to 8 MSPS), selectable normal or demultiplexed output modes, and an offset control range of +3V. The 16-bit conversion resolution preserves fine shadow detail in scanned images, essential for document and film scanners. Architecturally, the VSP3200 combines three CDS/PGA channels feeding a 16-bit ADC pipeline optimized for line-rate scanning. The demultiplexed output mode makes the device interface compatible with the VSP3210, which is pin-to-pin compatible with the VSP3100 in that mode, providing a migration path to a one-chip solution. Typical applications include flatbed document scanners, film scanners, CIS-based scanner modules, and industrial inspection cameras that use CCD or CIS sensors. Design consideration: because the part runs from a single +5V rail, keep the analog 5V supply clean and well decoupled; noise on this rail directly appears in pixel data at 16-bit resolution levels. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
VSP3200Y-2KG4 - 16-Bit 8MSPS CCD Signal Processor | TI
The Texas Instruments VSP3200Y-2KG4 is a 16-bit, 8 MSPS 3-channel analog front end (AFE) signal processor for CCD, CMOS and CIS image sensors, housed in a 48-pin LQFP (7x7 mm) package and operating from a single +5 V supply over 0C to +85C. An analog front end for image sensors is a specialized data-conversion IC that sits between a charge-coupled device (CCD) sensor and the digital image pipeline. It performs correlated double sampling (CDS) to remove kTC and low-frequency noise, applies programmable gain, offsets the black level, and digitizes the conditioned pixel signal with a high-speed ADC, delivering a clean digital video stream to downstream DSP or image-processing logic. Key features of the VSP3200Y include three independent Correlated Double Samplers (CDS) and three Programmable Gain Amplifiers (PGAs) that process CCD signal channels end-to-end on one chip, a 16-bit ADC running at up to 8 MSPS, and dual output mode for flexible system interfacing. Integration of the complete analog chain eliminates discrete CDS/PGA stages, reducing board area and analog design risk. The device is built on CMOS process technology and provides a serial digital output interface. According to TI product documentation, the VSP3200Y is interface compatible with the VSP3210, a 16-bit one-chip product; the VSP3210 is in turn pin-to-pin compatible with the VSP3100 when operated in demultiplexed output mode, giving designers a documented upgrade and substitution path within the same LQFP-48 family. Typical applications include CCD camera signal chains for industrial inspection, consumer video capture, and contact image sensor (CIS) modules used in scanners and document imaging. The single 5 V supply suits legacy 5 V consumer and industrial boards. When designing with this part, verify power-supply decoupling on both the analog and digital domains and confirm the output mode (multiplexed vs dual) matches the pixel-rate timing of your CCD clocking scheme. This page synthesizes distributor availability, drop-in family alternatives (VSP3210, VSP3200Y, VSP3100), and design considerations not found on the manufacturer product page.
X9313UST1 - 50kΩ 32-Tap Digital Potentiometer SOIC-8 | Renesas
The Renesas X9313UST1 is a digitally controlled potentiometer (XDCP™) housed in an 8-pin SOIC package with a fixed end-to-end resistance of 50 kΩ and 32 resistive taps. It provides a single-channel, non-volatile, up/down wiper interface through three logic input pins (U/D, INC, CS) and stores the last wiper position through on-chip nonvolatile memory that retains setting across power cycles. The 32-tap resolution gives approximately 1.0% per-step resolution across the resistor array. Background context: a digital potentiometer (often abbreviated "digi-pot") is a solid-state, semiconductor replacement for a mechanical potentiometer or trim pot. Digi-pots sit within the broader data-acquisition and analog-signal-conditioning hierarchy, alongside DACs and digital rheostats, and they belong to the Renesas XDCP™ family. Unlike mechanical pots, they are programmable by host firmware, never wear from mechanical actuation, and ship in surface-mount packages suitable for reflow soldering and dense PCB layouts. Key features include a low 1 mA (typical) standby current, terminal voltages up to ±5 V across the resistor array, a 1.0% end-to-end resistance tolerance, and a wiper current rating up to approximately ±1 mA continuous, with peak surge handling to 10 mA. The 3-wire serial interface consumes only three MCU GPIO pins and is compatible with 5 V logic. The internal architecture pairs a polysilicon resistor array with CMOS wiper switches and a non-volatile memory cell that latches the last wiper position before power-down. Three control inputs (CS, INC, U/D) implement a step-and-direction interface: CS enables the chip, INC clocks each tap step, and U/D selects up or down direction. Power-on recall places the wiper on the stored value with deterministic behavior. Typical applications are audio volume/balance control, LCD contrast/brightness trimming, programmable voltage references, sensor calibration, and parameter-set storage where an MCU must hold a setting through power-down. Because the wiper retains state without external EEPROM, designers can eliminate a serial EEPROM and reduce BOM cost in many calibration circuits. When designing with the X9313UST1, respect the maximum terminal voltage (±5 V across the resistor terminals) and verify that pin 8 is correctly identified in PCB layout - the part is widely second-sourced and a small number of look-alike 8-pin digi-pots swap the GND and VL pin positions. Add a 0.1 µF decoupling capacitor close to the supply pin and confirm that CS is not allowed to float. This page combines the Renesas datasheet specifications, current distributor pricing, pin-compatible cross references, and practical layout notes not always covered in the original datasheet, providing engineers a single-page engineering brief for the X9313UST1.