Integrierte Schaltungen

PIC32MK0512GPG064-E/R4X

PIC32MK0512GPG064-E/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MK0512GPG064-E/R4X is a 32-bit MIPS microAptiv microcontroller with 120MHz core speed, 512KB ECC-protected Flash, 64KB SRAM, and 53 I/O pins housed in a 64-pin VQFN (9x9mm) package. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one device. 32-bit MCUs like the PIC32MK use a wider data path than 8/16-bit MCUs, enabling higher computational throughput and direct handling of larger data types — useful for digital signal processing, complex state machines, and protocol stacks. The PIC32MK family specifically sits between traditional 8-bit PIC MCUs and Microchip's higher-end Cortex-M SAM families, targeting motor control, industrial automation, and IIoT edge nodes. Key features include 512KB of Flash with Error-Correcting Code (ECC) for high-reliability applications, 64KB of SRAM, a Floating Point Unit (FPU), multiple UART/SPI/I2C/CAN-FD peripherals, operational amplifiers on chip, and a 12-bit ADC with up to 3.5 MSPS sampling rate. The 120MHz core combined with the MIPS microAptiv architecture delivers 198 DMIPS of computational throughput. The 64-VQFN package with exposed thermal pad enables compact PCB designs while supporting 53 user I/O for flexible peripheral assignment. The device is built on a CMOS process and operates from 2.3V to 3.6V. The GPG designation indicates the General Purpose variant without CAN-FD (the GP versions omit CAN-FD compared to the MC/MCJ motor-control family variants). Multiple timer modules, PWM outputs, and quadrature encoder interfaces support closed-loop motor control firmware patterns common in industrial drives and robotics. Typical applications include industrial control PLCs, motor control boards (BLDC/PMSM drives), IIoT sensor hubs, building automation controllers, and digital power conversion. The combination of FPU, hardware op-amps, and high-resolution PWM makes it well-suited for field-oriented control (FOC) loops. The extended -40C to +125C operating temperature range also supports outdoor and automotive under-hood environments. When designing with this MCU, ensure proper decoupling of VDD/VSS pairs (one 100nF per adjacent pair, one bulk 10uF) and short traces to the 9x9mm QFN thermal pad, which should be soldered to a thermal via array. The Microchip Harmony framework and MPLAB X IDE provide configuration tools to map peripherals and generate initialization code.

Angebot Kontakt

PIC32MK0512GPG064-I/PT

PIC32MK0512GPG064-I/PT - 120MHz MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPG064-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at up to 120 MHz, integrating 512 KB of Flash program memory and 64 KB (reported as 65.5 KB by some sources) of SRAM in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) package. This GPG-family device is the general-purpose variant of the PIC32MK series, targeted at motor control, industrial control, and Industrial Internet of Things (IIoT) applications, and it ships as the industrial (-40C to +85C) operating-temperature grade. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an MCU sits at the leaf of the digital IC hierarchy: MCU -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. The microAptiv core implements the MIPS32 instruction set and adds DSP extensions and a single-precision FPU, giving the PIC32MK class deterministic real-time performance with hardware multiply-accumulate support. Key differentiating features of this part include 120 MHz core speed, 512 KB ECC-protected Flash, 64 KB SRAM, a high-performance analog front-end with multiple 12-bit ADC modules, configurable logic cells (CLC) and multi-output Capture/Compare/PWM (MCCP) timers suitable for advanced motor-control and power-conversion topologies, plus CAN-FD-capable communication blocks on the family. The GPG064 device is the 64-pin general-purpose variant; the family also offers higher-pin-count (GPE100) and motor-control (MCM) derivatives. Compared with the legacy PIC32MX family, PIC32MK offers significantly more analog and PWM resources while retaining the familiar MPLAB X IDE and Harmony ecosystem. The PIC32MK architecture pairs a 5-stage pipeline MIPS32 microAptiv core with dedicated DSPASE and FPU pipelines, allowing the CPU to handle DSP and floating-point work concurrently with integer execution. Bus arbitration is handled by a separate Bus Matrix unit, and Flash read/write accesses use ECC for industrial-grade reliability. The rich timer/CLC fabric means software-defined peripherals can be assembled for driving multi-phase BLDC, PFC stages, or digital power loops without external logic. Typical applications include industrial motor control (BLDC/PMSM/ACIM drives), PLC and industrial control boards, multi-channel sensor-fusion front-ends, IIoT edge nodes with CAN-FD connectivity, and high-channel-count data-acquisition systems. The 64-pin TQFP footprint makes it suitable for through-hole-friendly assembly or hand-prototyping on 2-layer boards. Design considerations: confirm whether you need the CAN-FD peripheral (present in the wider GPK family but explicitly listed as NO CAN-FD on the GPG064 variant by some distributor listings - verify against the latest Microchip datasheet DS60001570 before committing). Provide adequate decoupling (100 nF plus 4.7 uF bulk) per supply pin group and keep the analog AVss/AVdd pair isolated from noisy digital returns. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MK family, and practical design notes not aggregated on any single manufacturer or distributor page.

Angebot Kontakt

PIC32MK0512GPG064T-I/PT

PIC32MK0512GPG064T-I/PT - 120MHz 32-bit MCU 512KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPG064T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running up to 120 MHz, integrating 512 KB of Flash program memory and 64 KB of data RAM in a 64-pin TQFP (10x10 mm) package. The device is built on a CMOS process and is qualified for industrial temperature range (I-grade) with a Tape & Reel ("T") packaging option. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of analog and digital peripherals on a single die. PIC32MK microcontrollers sit in the hierarchy: microcontroller -> embedded processor -> semiconductor IC, and combine high-performance MIPS32 processing with DSP instructions and a single-precision hardware FPU. Key features include 512 KB of ECC-protected Flash, 64 KB SRAM, four I2C, four UART, three SPI, two I2S interfaces, up to 30 channels of 12-bit ADC, two 12-bit DACs, and motor-control PWMs that make it ideal for digital power conversion and field-oriented control. The 64-pin TQFP footprint is part of the TQFP family in the surface-mount QFP family of packages, allowing PCB layout reuse across the GPK/GPL/MCM PIC32MK variants. The PIC32MK architecture integrates dedicated motor-control peripherals, programmable analog op-amps, and high-resolution PWM with 7.5 ns resolution, enabling single-chip FOC motor drives up to several kW. ECC on Flash and parity on RAM improve functional safety for IEC 60730 class B end-equipment, while the 120 MHz core with FPU accelerates control-loop math at low latency. Typical applications include industrial motor control (BLDC/PMSM FOC drives), digital power supplies, PLCs and industrial control, IIoT edge nodes, factory automation, and uninterruptible power supplies. The "T" suffix designates Tape & Reel packaging for high-volume assembly, while the "-I" suffix denotes the -40C to +85C industrial temperature grade. When designing with this part, provide decoupling per the datasheet: 0.1 uF + bulk capacitance close to each VDDCORE/VDDIO pair, route analog and digital grounds as split planes joined at one point, and use MPLAB X IDE with the XC32 compiler for firmware development. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not aggregated on the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512GPG064T-I/R4X

PIC32MK0512GPG064T-I/R4X - 120 MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MK0512GPG064T-I/R4X is a 32-bit MIPS32 microAptiv PIC microcontroller operating at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. The device targets industrial control, motor control, and Industrial Internet of Things (IIoT) applications, delivering deterministic real-time performance and a rich analog and digital peripheral set. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data RAM, and a wide array of on-chip peripherals such as timers, ADC/DAC, communication interfaces (UART, SPI, I2C), and PWM channels. Within the broader taxonomy, the PIC32MK belongs to the family of 32-bit Flash microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MK devices specifically target motor control and industrial applications with their FPU, DSP extensions, and CAN FD connectivity. Key features of the PIC32MK0512GPG064T-I/R4X include a single-core MIPS32 microAptiv core with hardware multiply/divide and DSP extensions, four 16-bit analog op amps usable as programmable gain amplifiers, four 12-bit ADC modules with up to 42 analog inputs, multiple CAN FD ports, USB-FS Host/Device, and configurable logic cells. The 120 MHz core delivers 25.5 DMIPS / 142 CoreMark performance with hardware floating point support. ECC on Flash and SRAM improves reliability in harsh industrial environments. The architecture combines a deterministic interrupt controller with flexible peripheral trigger system, enabling tightly coupled motor control loops. The device supports 5V tolerant I/O on most pins, simplifying interfacing to legacy industrial sensors and actuators. Integrated op amps and 12-bit ADCs at 1.5 Msps enable single-chip current and voltage sensing for field-oriented control (FOC) of three-phase motors. Typical applications include BLDC/PMSM motor control (drones, e-bikes, industrial drives), solar inverters and string combiners, industrial PLC modules, IIoT edge nodes with CAN FD connectivity, building automation HVAC controllers, and multi-channel data acquisition systems. The wide operating temperature range of -40C to +85C supports outdoor and industrial deployments. When designing with this MCU, route analog and digital grounds as separate planes joined at a single point under the package, and use the 4 onboard op amps for current shunt amplification rather than external amplifiers to reduce BOM cost. Verify that CAN FD bit timing configuration matches the selected transceiver's propagation delay budget. This page synthesizes distributor pricing, drop-in PIC32MK family alternatives, and practical design notes not found in the standalone manufacturer datasheet, with cross-references to engineering guides for motor control and industrial IO.

Angebot Kontakt

PIC32MK0512GPK064-E/PT

PIC32MK0512GPK064-E/PT - 120MHz 512KB MCU with USB FS | Microchip

The Microchip PIC32MK0512GPK064-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120 MHz with 512 KB of ECC-protected Flash memory in a 64-pin TQFP (10x10 mm) package. It integrates a USB Full-Speed (USB FS) transceiver, a 12-bit ADC, multiple general-purpose timers, and rich connectivity peripherals designed for motor control, industrial control, and Industrial Internet of Things (IIoT) applications. Operating voltages are 2.5 V and 3.3 V, supplied by the on-chip LDO and the integrated 120 MHz PLL. The part is rated for the extended -40C to +125C industrial temperature range, denoted by the -E suffix, and the /PT suffix denotes the TQFP-64 package. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-chip memory, peripherals, and interfaces on a single die. The PIC32MK family uses the MIPS32 microAptiv core, which sits within the broader hierarchy of 32-bit microcontrollers -> embedded microcontrollers -> microprocessors -> integrated circuits. It is also closely related to the PIC microcontroller family and shares the PIC instruction set architecture, giving engineers access to the MPLAB X IDE, MPLAB Harmony framework, and the vast PIC library ecosystem. 32-bit MCUs are widely used where 8-bit and 16-bit parts run out of CPU headroom, headroom that microAptiv provides through 120 MHz core clock, hardware multiply/divide, and 64 KB SRAM-backed data path. Key features of the PIC32MK0512GPK064-E/PT include the 120 MHz core, 512 KB Flash with ECC, 64 KB SRAM (typical for the family), a 12-bit ADC with multiple conversion channels, USB Full-Speed device/host/OTG capability, multiple UART/SPI/I2C peripherals, and motor-control PWM modules. ECC on the Flash improves reliability in noisy industrial environments, while the integrated USB FS eliminates the need for a standalone transceiver, reducing BOM cost and PCB area. The TQFP-64 (10x10 mm) package provides 49 general-purpose I/O pins that remain after dedicated peripheral assignments, giving plenty of routing freedom for mixed-signal designs. Typical applications include BLDC/PMSM motor control drives, industrial PLC modules, IIoT edge nodes, factory automation controllers, multi-channel sensor hubs, and USB peripherals. The combination of 120 MHz performance, ECC Flash, and motor-control PWM makes this part a strong fit for cost-sensitive industrial designs that must survive the -40C to +125C range. Designers should note that the -E variant supports -40C to +125C, while the -I variant supports -40C to +85C for commercial/industrial settings. Choose the E grade for harsh-environment industrial deployment. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes that go beyond the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512GPK064-I/MR

PIC32MK0512GPK064-I/MR - 120MHz 512KB MCU, 64-QFN | Microchip

The Microchip Technology PIC32MK0512GPK064-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz, integrating 512 KB (512K x 8) of ECC-protected Flash, 4 KB EEPROM, and 128 KB SRAM in a 64-pin QFN (9x9 mm) package. It targets motor control, industrial control, and Industrial Internet of Things (IIoT) applications, and is specified for an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC32MK family belongs to the 32-bit MCU hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Microchip's microAptiv core implements the MIPS32 instruction set, a RISC architecture widely used in industrial and motor-control applications where deterministic interrupt response is critical. Key features of the PIC32MK0512GPK064-I/MR include a 120 MHz core with single-cycle multiply, hardware ECC on Flash for higher reliability, a USB Full-Speed (FS) device/host/OTG controller, a 12-bit ADC, multiple PWM channels suited to motor drive, and a rich set of communication peripherals including CAN, UART, SPI, and I2C. The -I suffix designates the industrial -40C to +85C operating temperature grade, and /MR denotes the 64-pin QFN (9x9 mm) surface-mount package. Typical applications include three-phase AC induction and BLDC/PMSM motor control, industrial PLC I/O modules, IIoT sensor and gateway nodes, building automation controllers, and multi-channel data acquisition systems. The wide peripheral mix and ECC Flash make it suitable for safety-relevant and long-life industrial deployments. When designing with this part, verify that the 2.3V to 3.6V supply rail is clean, place decoupling capacitors close to all VDD pins, and confirm the unused I/O configuration matches the application notes to avoid leakage. Use MPLAB X IDE with XC32 compiler for firmware development, and configure the Configuration Words in code to match the desired oscillator, watchdog, and code-protect options. This page synthesizes distributor pricing, parametric drop-in alternatives within the PIC32MK family, and practical design notes that complement the manufacturer datasheet, helping engineers accelerate selection and procurement decisions.

Angebot Kontakt

PIC32MK0512GPK064-I/PT

PIC32MK0512GPK064-I/PT - 120MHz 512KB MCU | Microchip Technology

The Microchip Technology PIC32MK0512GPK064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv MCU core with integrated single- and double-precision Floating Point Unit (FPU), operating at up to 120 MHz, with 512 KB of ECC-protected dual-panel Flash memory and a rich motor-control peripheral set, housed in a 64-pin TQFP (10x10 mm) package. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory, RAM, and peripherals on a single silicon die. The PIC32MK family specifically targets motor control, industrial control, industrial IoT (IIoT), and multi-channel analog sensing applications by combining deterministic DSP performance with industrial-grade communication interfaces (CAN-FD, USB-FS, UART/SPI/I2C). Key features include 120 MHz core clock with MicroMIPS mode enabling 40% smaller code size, four 64-bit accumulators, single-cycle MAC for saturating and fractional math, dual-panel ECC Flash for safe firmware updates, 12-bit multi-channel ADC, dedicated Motor Control PWM (MCPWM) peripherals, CAN-FD, USB Full-Speed, and a wide 3.0V to 3.6V supply range over the -40°C to +85°C industrial temperature grade. The microAptiv core with hardware FPU accelerates floating-point motor-control algorithms (FOC, Clarke/Park transforms, PID loops) that previously required fixed-point approximations. Dual-panel Flash with ECC supports in-field firmware updates with zero downtime - the inactive panel is rewritten while the active panel continues execution, then a hardware switch swaps them atomically. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, industrial PLC modules, multi-channel data acquisition systems, solar inverters, and CAN-FD networked sensor hubs. The MCPWM peripherals provide complementary PWM with hardware dead-time insertion and ADC triggering, reducing CPU load in field-oriented control loops. When designing with this device, prioritize PCB layout for the analog inputs: route ADC reference and analog supply separately from digital rails, and place 100 nF decoupling capacitors as close to every supply pin as possible to preserve ADC SNR. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-specific design notes not consolidated in the manufacturer datasheet, providing an information-gain resource for engineers evaluating the PIC32MK GPK family.

Angebot Kontakt

PIC32MK0512GPK064T-E/MR

PIC32MK0512GPK064T-E/MR - 120MHz, 512KB Flash MCU | Microchip

The Microchip PIC32MK0512GPK064T-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120MHz with 512KB of ECC-protected Flash and 64KB of RAM, housed in a 64-pin QFN (9x9 mm) package. The device integrates a Floating Point Unit (FPU) for single/double precision math, MicroMIPS mode for up to 40% code-size reduction, four 64-bit accumulators, and a single-cycle MAC supporting saturating and fractional math. On-chip peripherals include a USB Full-Speed device/host/OTG controller, multiple 12-bit ADC modules, CAN-FD-capable controllers, high-resolution PWM aimed at motor control, and a rich communication set (UART, SPI, I2C, SENT). A 32-bit microcontroller (MCU) is a programmable system-on-chip combining a high-performance processor core, volatile and non-volatile memory, and a peripheral set on a single silicon die. Within the broader semiconductor taxonomy, MCUs belong to the embedded processor category (microcontroller -> embedded processor -> logic IC -> semiconductor). The microAptiv core is a synthesizable MIPS32 core designed for low-power deterministic real-time control, balancing DSP-class arithmetic throughput with deterministic interrupt latency required by industrial closed-loop systems. ECC-protected Flash extends reliability in harsh industrial and automotive environments by detecting and correcting single-bit memory errors. Key features of this part include: 120MHz CPU clock with 1.56 DMIPS/MHz, hardware FPU, 512KB dual-panel Flash, 64KB SRAM, four DMA channels, six UART, four SPI, four I2C, two CAN-FD, two 12-bit ADC modules (up to 42 analog inputs total), seven general-purpose 16-bit timers, eleven SCCP/SCCP modules for PWM, and a USB Full-Speed transceiver. The 64-QFN package exposes ample GPIO while keeping the PCB footprint to 9x9 mm. The PIC32MK architecture targets digital signal control (DSC) workloads: it bridges conventional MCU determinism with DSP throughput. The combination of single-cycle MAC, dedicated accumulators, and a high-resolution PWM makes the part well-suited for field-oriented control (FOC) of brushless DC motors, power conversion control loops, and multi-channel sensor fusion where the on-chip FPU accelerates transform calculations. Typical applications include industrial motor drives, BLDC/PMSM servo controllers, solar inverters, industrial PLC modules, IIoT edge nodes with USB-FP connectivity, and general-purpose 32-bit embedded control. In each of these scenarios the FPU, ECC Flash, and CAN-FD peripheral provide clear differentiation against simpler Cortex-M0/M3 MCUs. When designing with this part, carefully evaluate the 64-QFN thermal dissipation path under full peripheral load; ensure the exposed pad is soldered to a sufficiently large copper pour to keep junction temperature within the -40C to +125C operating range. Decoupling bulk and ceramic capacitors as close to each VDD/VSS pair as the package allows is critical for ADC accuracy. This page synthesizes distributor pricing, verified same-brand drop-in alternatives, application-specific companion parts, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512GPK064T-I/MR

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/MR is a 32-bit MIPS32 microAptiv PIC microcontroller IC operating at up to 120 MHz, with 512 KB of ECC-protected Flash and a hardware Floating Point Unit (FPU), housed in a 64-pin QFN 9x9 mm package. The variant decoded in the part number suffix is the General Purpose (GP) family member with USB Full-Speed and without CAN-FD. A PIC32 microcontroller is a 32-bit MCU architecture based on the MIPS32 instruction set (microAptiv core) that bridges the gap between 8/16-bit PIC microcontrollers and high-performance ARM Cortex-M parts. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family. The PIC32MK family in particular targets motor control, industrial control, and Industrial IoT (IIoT) applications where DSP performance, FPU math, and rich analog peripherals matter. Key features include 120 MHz CPU clock with single-cycle MAC and four 64-bit accumulators, MicroMIPS mode for 40% smaller code size, hardware FPU for single- and double-precision IEEE-754 math, 512 KB dual-panel Flash with ECC, 128 KB SRAM with ECC, a 12-bit ADC up to several Msps with up to ~49 analog inputs available, USB Full-Speed, multiple UART/SPI/I2C, and motor-control PWMs. The 64-QFN package includes an exposed pad for thermal dissipation. Architecturally, the PIC32MK combines a deterministic MIPS32 pipeline, dedicated DSP extensions, and a rich analog front end. The dual-panel Flash allows live updates without stopping code execution, useful in industrial field upgrades. ECC on Flash and SRAM improves reliability in noisy motor and power-conversion environments. Typical applications include BLDC/PMSM motor control (field-oriented control), industrial PLCs, multi-channel data acquisition, USB-connected industrial sensor nodes, and IIoT edge gateways. The wide operating voltage (2.3V to 3.6V) and industrial temperature range (-40C to +85C) make the part suitable for harsh environments. When designing with this device, ensure the PCB includes a thermal pad soldered to a sufficiently large copper pour for heat extraction, plan for decoupling capacitors near each VDD pin pair, and reserve the USB DP/DM traces for 90-ohm differential impedance to pass USB FS compliance. This page synthesizes distributor pricing and stock for PIC32MK0512GPK064T-I/MR, identifies drop-in alternatives in the same 64-QFN footprint, and supplies design notes that complement the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512GPK064T-I/PT

PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/PT is a 32-bit MIPS microAptiv PIC32MK microcontroller running up to 120 MHz, integrating 512 KB of ECC-protected Flash and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) industrial-grade package. It targets high-performance motor control, industrial control, and IIoT edge nodes that require DSP/FPU math plus rich analog and connectivity peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and analog/digital I/O. 32-bit microcontrollers extend 8/16-bit parts with wider registers, deterministic interrupt latency, hardware floating-point and DSP engines, and larger address spaces; PIC32MK MCUs sit in the performance tier between low-power Cortex-M0+ parts and application processors, providing deterministic real-time control with on-chip op amps, high-speed ADCs and PWM modules. Key features include 512 KB Flash with ECC, 128 KB SRAM, 4 KB EEPROM emulation, a single-precision FPU, DSP instructions, a USB 2.0 Full-Speed device/host/OTG controller, multiple UART/SPI/I2C interfaces, up to seven 16-bit timers, and a 12-bit ADC with up to 3 MSPS sampling and dedicated op amps. The 64-pin TQFP (PT) package offers 49 user I/O lines and an operating voltage of 2.3V to 3.6V, suitable for 3.3V digital systems with industrial temperature grade (-40C to +85C). Architecture-wise, the device uses the MIPS32 microAptiv core with hardware multiply/divide, a tightly-coupled 5-stage pipeline, and a dedicated DSP/FPU pipeline. Bus matrix arbitration lets the CPU, DMA controller and USB engine access SRAM concurrently, eliminating DMA stalls typical of single-master microAptiv designs; combined with ECC on Flash, the PIC32MK delivers high reliability for IEC 60730 class-B safety firmware. Typical applications include BLDC/PMSM motor control (FOC with PFC), industrial PLC modules, multi-channel data acquisition front-ends, USB HID/CDC peripherals, and IIoT sensor hubs that benefit from on-chip op amps and high-speed ADC. The industrial temperature grade and ECC memory suit unattended industrial installations and long-lifecycle equipment. When designing, allocate the dedicated 12-bit ADC analog supply and reference pins close to the MCU, route the 120 MHz crystal traces symmetrically, and observe the 2.3V minimum Vdd. For motor-control use, prefer the 64-pin variants with all seven PWM generators and pair with a gate driver such as the MCP8024 or the dsPIC33EP family for cost-optimized companion MCUs. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MK0512GPK100-E/PT

PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MK0512GPK100-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB of Flash memory, packaged in a 100-pin TQFP (12x12 mm). It combines a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS mode for ~40% smaller code, four 64-bit accumulators and single-cycle MAC supporting saturating and fractional math. A 32-bit microcontroller (MCU) is a microprocessor core integrated with Flash program memory, SRAM, peripherals and a multi-channel interrupt controller on a single chip. PIC32MK devices sit at the high-performance end of Microchip's PIC32 family and bridge toward DSP-class workloads, occupying a position in the hierarchy: PIC32MK -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded semiconductor. Key differentiating features include 512 KB Dual-Panel Flash with ECC protection, four 64-bit accumulators for DSP workloads, seven 12-bit ADCs at up to 3.75 MSPS each, a general-purpose variant with USB but no CAN-FD, and 78 user I/O pins. The 100-pin TQFP supports a wide range of motor control, industrial and IIoT interfaces. Architecturally, the device pairs a 120 MHz MIPS32 microAptiv core with a hardware FPU, dedicated DSP accumulators and four 64-bit timers. Dual-panel Flash enables live firmware updates without device reset, while ECC-protected memory improves reliability for industrial long-life deployments. Typical applications include BLDC/PMSM motor control, industrial PLC modules, multi-channel data acquisition systems, IIoT edge nodes and USB-connected industrial sensors. The combination of seven fast ADCs and DSP extensions suits sensor-fusion and closed-loop control. When designing with this MCU, allocate decoupling capacitance per the family hardware guide and route the analog/digital grounds with a single point tie. For motor-control layouts, keep the PWM outputs symmetrical and isolate the analog reference from switching currents. This page synthesizes distributor pricing, drop-in alternatives and design notes not found in the standalone manufacturer datasheet, helping engineers select the right PIC32MK variant for motor control, IIoT and industrial designs.

Angebot Kontakt

PIC32MK0512GPK100T-E/PT

PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512GPK100T-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, running at 120MHz, with 512KB of ECC-protected Flash, 128KB SRAM, 4KB EEPROM, and 78 I/O pins in a 100-pin TQFP (12x12 mm) package. It integrates a single-precision/double-precision hardware Floating Point Unit, four 64-bit accumulators, and a single-cycle MAC that supports saturating and fractional math for DSP workloads. The 120MHz core, combined with the dual-panel Flash, makes it suitable for deterministic, hard-real-time control loops in motor and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals into one package. In the broader semiconductor hierarchy, MCUs sit within the embedded computing category, alongside microprocessors (MPUs) and DSPs. Within the embedded-computing taxonomy, this part belongs to the 32-bit MCU tier, which delivers higher computational throughput than 8-bit or 16-bit MCUs and adds DSP-class instructions for signal-processing tasks. Key features include a USB Full-Speed device/host/OTG controller, multiple 12-bit ADC modules with up to 3.5 Msps conversion rate, high-resolution PWM outputs targeting motor and digital-power control, and a rich communication peripheral set including CAN-FD, UART, SPI, I2C, and SQI. The 512KB ECC Flash provides bit-error correction for safety-critical firmware storage, and the dual-panel layout supports live update and simultaneous read-while-write. The part operates from 2.3V to 3.6V across an industrial -40C to +125C temperature range, qualified for the -E (extended) grade. Architecturally, the PIC32MK combines a RISC-style Harvard architecture (separate instruction and data paths) with MicroMIPS compressed instructions, reducing code size by approximately 40% versus the standard MIPS32 instruction set. This allows complex motor-control or digital-power algorithms to fit in the on-chip Flash, while the FPU accelerates transcendental math used in vector control or Kalman-filter estimation loops. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), field-oriented control (FOC) and power-conversion inverters, industrial PLCs, multi-channel data acquisition with synchronized sampling, IIoT edge controllers, and USB-connected human-machine interface (HMI) panels. The combination of DSP extensions, FPU, and high-resolution PWM specifically targets digital power and motor-control firmware libraries from Microchip. When designing with this device, ensure the high-resolution PWM timing requirements are met by following Microchip AN1078 (Sensorless Field Oriented Control) or AN1292 (Power Conversion) reference designs. Decoupling the AVDD/AVSS analog supply pins with 100nF + 10uF bulk capacitors per ADC is essential to achieve the rated 12-bit ENOB performance, and unused I/O should be configured as outputs low or inputs with internal pull-up to minimize I_leakage in safety-relevant hardware. This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, datasheet download links, and practical motor-control design notes that go beyond the manufacturer datasheet excerpt.

Angebot Kontakt

PIC32MK0512GPK100T-I/PT

PIC32MK0512GPK100T-I/PT - 32-bit 120MHz MCU 512KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MK0512GPK100T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120MHz with 512KB ECC-protected Flash memory, housed in a 100-pin TQFP (12x12 mm) package. It integrates a Floating Point Unit for single/double precision math, four 64-bit accumulators, single-cycle MAC with saturating and fractional support, and MicroMIPS mode that delivers 40% smaller code size. The device targets high-performance motor control, industrial control, and Industrial IoT applications. A 32-bit microcontroller (MCU) is a programmable processor integrating CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on a single die. The PIC32MK family extends the PIC32 architecture with DSP extensions, hardware FPU, and dual-panel Flash that supports live update — a feature unique to motor-control firmware. Within the broader hierarchy, the PIC32MK belongs to the 32-bit MCU segment alongside ARM Cortex-M3/M4, sitting between 16-bit PIC24 and 64-bit MIPS/ARM application processors. Key features of the PIC32MK0512GPK100T-I/PT include 120MHz core clock, 512KB dual-panel Flash, USB Full Speed, 12-bit ADC, CAN-FD communication, multiple UART/SPI/I2C interfaces, and dedicated motor-control PWM. The dual-panel Flash architecture allows background firmware updates without halting the application — critical for industrial drives that cannot tolerate downtime. ECC protection on Flash and SRAM improves reliability in noisy motor-drive environments. The microAptiv core with integrated FPU and DSP extensions accelerates trigonometric math used in field-oriented control (FOC) algorithms, reducing CPU loading and enabling higher switching frequencies for smoother torque. The MicroMIPS mode compresses instruction stream by 40%, allowing more application code in the same Flash footprint and reducing fetch power. Typical applications include AC induction and BLDC/PMSM motor drives, industrial PLCs, IIoT edge nodes with CAN-FD connectivity, multi-channel data acquisition systems, and factory automation controllers. The device is also well-suited for power-conversion digital control loops. When designing with this MCU, use Microchip's MPLAB Harmony v3 framework for peripheral libraries and middleware. Place a 0.1uF decoupling capacitor adjacent to every VDD/VSS pin pair, and provide a 12mm copper pour under the TQFP thermal pad with at least 8 thermal vias for heat dissipation. This page consolidates Microchip datasheet specifications, distributor pricing tier snapshots, drop-in PIC32MK same-package alternatives, and engineering design notes beyond what is summarized in the datasheet alone.

Angebot Kontakt

PIC32MK0512MCF064

PIC32MK0512MCF064 - 120MHz 32-Bit MCU with FPU | Microchip

The Microchip PIC32MK0512MCF064 is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 120 MHz with 512 KB of Flash and 128 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm). A 32-bit MCU combines a processor core, memory, and programmable peripherals on a single integrated circuit. With a 32-bit data path, it delivers greater performance and memory addressing than 8-bit or 16-bit MCUs. The PIC32MK family sits in the microcontroller hierarchy as a general-purpose and motor-control application MCU, positioned for industrial control and IIoT systems. Key features include seven 12-bit ADCs each running at up to 3.75 MSPS, multiple CAN 2.0B controllers, USB FS device support, four I2C and six I2S interfaces, PWM modules, and quadrature encoder interfaces (QEI). The integrated FPU accelerates single-precision floating-point math while DSP instructions speed filtering and control loops. Operating voltage spans 2.3V to 3.6V with industrial temperature grades of -40C to +85C (I suffix) or -40C to +125C (E suffix). The MIPS32 microAptiv core uses a 5-stage pipeline delivering 1.5 DMIPS/MHz, so at 120 MHz the device achieves roughly 180 DMIPS. A DMA controller offloads data movement between ADCs, communication peripherals, and SRAM, keeping the CPU free for control algorithms. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs simplifies field programming, and SEGGER debug tools are supported. Typical applications include field-oriented control (FOC) of brushless DC motors, multi-channel CAN gateways, and IIoT edge nodes requiring real-time sensing and control. The high-channel-count ADC plus PWM makes it well suited to closed-loop multi-phase motor drives. Design tip: decouple the 3.3V supply carefully at every VDD pin and pair PGECx/PGEDx pins correctly for programming. Pricing as of 2026-08-29 starts around $11.48 at LCSC.

Angebot Kontakt

PIC32MK0512MCF064-E/MR

PIC32MK0512MCF064-E/MR - 32-bit 80MHz MCU 512KB Flash 64-QFN | Microchip

The Microchip Technology PIC32MK0512MCF064-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running up to 80 MHz, with 512 KB ECC Flash, 64 KB SRAM, and a 64-pin 9x9 mm QFN package optimized for general purpose and motor control applications. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program and data memory, and programmable peripherals. The PIC32MK family sits in Microchip's 32-bit MCU portfolio above the 16-bit PIC24F and below the high-end SAME70/SAMS70 lines, and below PIC32MX/MZ family derivatives in cost-per-MIPS. As a motor-control and general-purpose part, the PIC32MK0512MCF064 serves designers building industrial drives, digital power, and Field-Oriented Control (FOC) motor loops where deterministic PWM and analog feedback are mandatory. Key features include a 120 MHz capable MIPS32 microAptiv core (this part is rated to 80 MHz), 512 KB Flash with ECC, 64 KB SRAM, four pairs of PWM outputs with up to 2 ns resolution, a 12-bit 3.75 Msps ADC with up to 42 analog channels, four op-amps and three comparators for analog signal conditioning, and CAN-FD plus USB-FS/Host connectivity. A Floating-Point Unit (FPU) accelerates real-time DSP math used in sensored and sensorless motor control. Architecture is a Harvard-style microAptiv pipeline with dedicated multipliers, an integrated FPU, and a tightly-coupled DMA engine. The motor-control PWM peripheral supports complementary outputs, fault inputs, and dead-time insertion, while the high-speed ADC can be triggered from the PWM with sub-microsecond latency. ECC on Flash protects against bit-flips in long-lifetime industrial installations. Typical applications include BLDC and PMSM motor control, industrial automation PLCs, digital switching power supplies, solar inverters, and USB-connected human-machine interfaces. Wide operating voltage (2.5 V to 3.6 V) and -40C to +125C extended temperature support harsh-environment deployment. When designing with this device, ensure the 64-QFN exposed pad is soldered to a continuous ground pour for thermal dissipation and signal integrity. Plan pin allocation early - the 9x9 mm QFN provides more I/O than the 64-pin TQFP but requires via-in-pad or thermal vias for the e-pad. This page synthesizes real distributor pricing, Microchip-recommended alternatives, drop-in same-package substitutes, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512MCF064-E/PT

PIC32MK0512MCF064-E/PT - 120MHz 512KB Flash 32-Bit MCU | Microchip

The Microchip PIC32MK0512MCF064-E/PT is a 32-bit general-purpose and motor-control microcontroller IC built on the MIPS32 microAptiv core, packaged in a 64-pin TQFP (10x10 mm). It integrates 512 KB of Flash, 64 KB of SRAM (with up to 128 KB depending on configuration), and a CAN-FD controller set, alongside high-resolution motor-control PWMs and a 12-bit ADC for precision analog sampling. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC32MK family belongs to the broader hierarchy of 32-bit microcontrollers -> embedded controllers -> microprocessors -> semiconductors. The microAptiv core adds DSP and single-precision FPU extensions, making this category of MCU suitable for control loops, signal conditioning, and Industrial IoT edge nodes. Key features include up to 120 MHz CPU clock (typically derated to 80 MHz in this -E variant), four I2C ports, six I2S ports, USB 2.0 Full-Speed, CAN 2.0B, and dedicated motor-control PWM peripherals. The device operates from 3.0 V to 3.6 V, supports -40C to +125C industrial temperature range (E suffix), and is AEC-Q100 qualified for automotive environments. Architecturally, the part combines a Harvard-style bus, ECC-protected Flash, and a high-performance peripheral set including dead-band generators and fault inputs for three-phase motor drive. The on-chip FPU and DSP instructions accelerate math-heavy control algorithms like field-oriented control (FOC) without offloading to a coprocessor. Typical applications include BLDC/PMSM motor drives, industrial PLCs, multi-channel CAN-FD nodes, USB peripherals, and digital power conversion. The same silicon is also used in EV charging modules and renewable-energy inverter stages where CAN-FD and FPU performance converge. When designing with this device, provision adequate bulk and decoupling capacitance near VDD pins and route the high-speed USB differential pair with 90-ohm impedance. Reserve the trace between the debugger header and PGECx/PGEDx pins for reliable in-circuit programming. This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives within the same TQFP-64 footprint, and practical design notes not collected in a single section of the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512MCF064-I/PT

PIC32MK0512MCF064-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MK0512MCF064-I/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB (512K x 8) of Flash memory, packaged in a 64-pin TQFP (10x10 mm). The device combines DSP and FPU capability with a rich peripheral set targeting motor control, industrial control, and multi-channel CAN FD applications. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die. The PIC32MK family sits in the hierarchy MCU -> 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK GPG/MCJ sub-family. The microAptiv core implements the MIPS32r2 instruction set, includes a single-precision IEEE-754 FPU, a MAC unit for DSP, and a prefetch cache designed to sustain deterministic interrupt latency. Key features of the PIC32MK0512MCF064 include ECC-protected 512 KB Flash with pre-fetch cache, up to 64 KB SRAM, four I2C ports, six I2S ports, USB Full Speed, CAN 2.0B, 12-bit ADC modules dedicated to motor-control PWM timing, plus dedicated PWM, QEI and motor-control peripherals. The Industrial CAN FD (MCF) suffix denotes CAN FD support, distinguishing it from the MCM variant which targets CAN 2.0B. ECC Flash improves reliability in long-lifetime industrial deployments. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial field-bridge nodes using CAN FD, Industrial IoT edge controllers, multi-channel power conversion, and USB-connected human-machine interface (HMI) panels. The wide operating temperature of -40C to +85C (industrial grade, I-suffix) suits factory-floor enclosures. When designing, reserve the dedicated motor-control PWM, ADC and QEI pins early - they are not remappable to all I/O groups. Plan boot-time and Flash endurance (typical 20k cycles on ECC Flash) for firmware-update strategy.

Angebot Kontakt

PIC32MK0512MCF064T-E/MR

PIC32MK0512MCF064T-E/MR - 80MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCF064T-E/MR is a 32-bit MIPS32 microAptiv PIC microcontroller IC running up to 80 MHz with 512 KB of Flash and a 64-pin QFN 9x9 mm package. It integrates a single-core MIPS32 microAptiv core with DSP extensions, a floating-point unit, and 64 KB of SRAM for motor-control and general-purpose embedded designs. The part is rated for the extended -40C to +125C industrial temperature range and ships in tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile Flash memory, SRAM, and a rich set of peripherals such as timers, ADC/DAC modules, communication interfaces, and PWM channels. PIC32MK devices belong to the PIC32 32-bit family (microcontroller -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 -> PIC32MK sub-family) and combine DSP, FPU, ECC Flash, and CAN FD support, making them suitable for safety-critical and motor-control applications. Key features of the PIC32MK0512MCF064 include the MIPS32 microAptiv core with DSP/FPU, 512 KB ECC Flash, 64 KB SRAM, multiple high-speed ADC modules suited for motor-control current sensing, CAN FD peripherals, and a flexible PWM peripheral set for driving three-phase inverters. The integrated signal-chain peripherals reduce BOM cost and PCB area compared with external analog front ends. Architecturally, the device pairs the microAptiv core with a multi-channel DMA, dual 12-bit ADC modules capable of high conversion rates, and dedicated motor-control PWM peripherals. The combination of DSP, FPU, and motor-control-optimized peripherals positions the PIC32MK family for digital signal processing in field-oriented control (FOC) loops. Typical applications include three-phase BLDC/PMSM motor drives, industrial control PLCs, industrial IoT (IIoT) edge nodes, multi-channel CAN FD networks, and digital power conversion. The part combines DSP/FPU performance with deterministic motor-control peripherals, which is uncommon in this class. When designing with this MCU, ensure that the extended-temperature QFN 9x9 mm land pattern is correctly designed for the rated 80 MHz operation, that decoupling is sized per the datasheet, and that the JTAG/trace pins are routed to allow in-circuit programming and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the engineer a single reference for sourcing and replacement decisions.

Angebot Kontakt

PIC32MK0512MCF064T-E/PT

PIC32MK0512MCF064T-E/PT - 32-bit 80MHz MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK0512MCF064T-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, delivering up to 80 MHz CPU performance with 512 KB of Flash program memory and 64-pin TQFP surface-mount packaging. It combines a Floating Point Unit (FPU) and Digital Signal Processing (DSP) extensions with 128 KB of SRAM and 4 KB of EEPROM, providing the computational headroom required for closed-loop motor control and real-time industrial control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals. Within the broader semiconductor taxonomy, this device belongs to the 32-bit MCU category, itself a subset of microcontrollers and embedded processors. The microAptiv core sits inside the MIPS32 family and uses a load/store RISC architecture with hardware multiply-accumulate and DSP instructions, allowing engineers to execute sensor-processing algorithms without an external DSP. Key features include AEC-Q100 automotive-grade qualification, an integrated FPU/DSP, an on-chip 12-bit ADC and high-resolution PWM modules targeted at three-phase motor drive. The part operates from a 2.2 V to 3.6 V supply and is rated for the -40 C to +125 C extended industrial/automotive temperature range. The 64-pin TQFP (PT) package with 10x10 mm body provides ample ground and supply pins for noise-sensitive analog mixed-signal designs. Architecture-wise, the PIC32MK family supports up to 120 MHz on higher-speed variants and integrates dedicated CAN, USB, and motor-control peripherals. This particular suffix (T-E/PT) specifies tape-and-reel packaging, an extended temperature grade, and the 64-pin TQFP package. The F suffix in the part number designates the Flash density (512 KB), while the trailing CF indicates the motor-control peripheral configuration rather than the general-purpose (GP) variant. Typical applications include three-phase brushless DC motor drives, industrial PLCs, multi-channel CAN node controllers, robotics and CNC controllers, and renewable-energy power conversion stages. The combination of AEC-Q100 grade and a high-pin-count package also makes it suitable for body electronics modules and automotive HVAC actuators. When designing with this MCU, allocate at least one ground pin per power pin and follow Microchip's reference manual guidelines for analog/digital supply isolation. The integrated op-amps and comparators can replace external components in current-shunt sensing, but require careful PCB layout to avoid coupling switching noise into the analog front-end.

Angebot Kontakt

PIC32MK0512MCF064T-I/MR

PIC32MK0512MCF064T-I/MR - 120MHz 512KB MCU 64-QFN | Microchip

The Microchip Technology PIC32MK0512MCF064T-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC delivering 120MHz CPU performance with 512KB of ECC Flash and 64KB SRAM, housed in a 64-pin 9x9 mm QFN package with industrial -40C to +85C temperature rating. The device combines a high-performance core with a rich peripheral set aimed at motor control, industrial control, Industrial IoT, and multi-channel CAN-FD applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a broad set of on-chip peripherals (timers, ADC, communication controllers) into a single chip, enabling compact embedded designs without external glue logic. The PIC32MK family sits at the top of Microchip's 32-bit MCU portfolio, positioned between general-purpose PIC32MX and high-performance dsPIC/PIC32MZ families, with hardware floating-point, DSP extensions, and dedicated motor-control peripherals. Key features of the PIC32MK0512MCF064T-I/MR include a 120MHz MIPS32 microAptiv core with FPU and DSP extensions, 512KB ECC Flash with pre-fetch cache, 64KB SRAM, 4KB EEPROM emulation, four dedicated op-amps for current sensing, dual 12-bit 5MSPS ADC modules with up to 32 analog inputs, and dual CAN-FD controllers. The integrated op-amps eliminate external analog signal conditioning for Field-Oriented Control (FOC) motor loops, reducing BOM cost and PCB area. The architecture separates high-speed analog from digital logic using independent ADC cores and dedicated DMA channels, enabling deterministic sampling even under heavy interrupt load. Hardware CRC, AES, and deadman timers support functional-safety and industrial-automation requirements. The 64-QFN package exposes 53 GPIO and supports JTAG/ICSP trace for debug. Typical applications include BLDC/PMSM motor drives (FOC up to 4 motors), solar inverters, industrial PLC modules, IIoT edge nodes with CAN-FD backbones, and multi-axis robotic controllers. The dual CAN-FD controllers and high ADC bandwidth also suit automotive body-electronics gateways. Design tip: when targeting this MCU for motor control, allocate the four integrated op-amps to phase-current sensing and route ADC traces as differential pairs; provide a clean 3.3V AVDD rail (LDO from system 5V) and short the AGND pin to GND at a single star point to avoid analog-to-digital crosstalk under PWM switching. This page synthesizes distributor pricing, drop-in alternative candidates, and practical design notes not found in the manufacturer datasheet, including same-package alternatives for footprint reuse across the PIC32MK family.

Angebot Kontakt

PIC32MK0512MCF064T-I/PT

PIC32MK0512MCF064T-I/PT - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCF064T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at up to 120 MHz, integrating 512 KB of Flash and 131 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MK family, which targets motor control, industrial control, Industrial IoT (IIoT), and multi-channel CAN applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and programmable peripherals into one package. The PIC32MK family sits inside the wider 32-bit MCU taxonomy: microcontroller -> 32-bit MCU -> MIPS32-based MCU -> PIC32 family -> PIC32MK sub-family. It is engineered for real-time control tasks where deterministic performance and rich analog/motor-control peripherals matter more than the largest on-chip Flash size. Key features include a 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP extensions, four independent ADC pairs (12-bit, 3.75 MSPS with up to 41 analog inputs), four analog comparators, six UART/SPI/I2C peripherals plus USB 2.0 Full-Speed, two CAN-FD modules, and four SQI/QSPI interfaces. Dedicated motor-control PWM, QEI, and 16-bit PWM/IC/OC timers make it well-suited to field-oriented control (FOC) of three-phase BLDC and PMSM motors. The architecture separates application code from motor-control loops using dual Flash banks and ECC-protected memory options, allowing live firmware updates and improved reliability in safety-conscious systems. The 64-pin TQFP gives access to the full peripheral set, while a 64-pin QFN variant (PIC32MK0512MCF064T-I/MR) is available for space-constrained layouts. Typical applications include industrial BLDC/PMSM motor drives, robotic motion controllers, multi-axis CNC peripherals, solar inverters, PLC modules, and CAN-FD-enabled IIoT sensor nodes. The device operates from 2.2 V to 3.6 V with an industrial -40 C to +85 C junction range. When designing with this part, place decoupling capacitors within 2 mm of every VDDCORE/VDDIO pin pair and keep the analog AVSS/AVDD traces short and star-grounded for best ADC SNR. Always use Microchip's MPLAB Harmony configurator and a recent XC32 compiler to bring up the FPU/DSP and motor-control PWMs. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives from the same PIC32MK family, and practical design notes not collected in the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512MCF100-E/PT

PIC32MK0512MCF100-E/PT - 120MHz 512KB Motor Control MCU | Microchip

The Microchip Technology PIC32MK0512MCF100-E/PT is a 32-bit general purpose and motor control application microcontroller in the PIC32MK family, built on the MIPS32 microAptiv core with a single-precision Floating Point Unit (FPU) and DSP extensions. The part integrates 512 KB of Flash, 256 KB of SRAM, and 4 KB of EEPROM, and operates at up to 120 MHz from a 2.2 V to 3.6 V supply. It is housed in a 100-pin TQFP package (12x12 mm) and is qualified to AEC-Q100 for automotive applications, with an operating temperature range of -40C to +125C. What is a motor-control MCU? A motor-control microcontroller is a class of embedded processor that combines a deterministic CPU core with high-resolution PWM timers, fast ADCs for current/voltage sensing, dedicated op-amps for signal conditioning, and communication peripherals (CAN-FD, I2C, SPI, UART) required to drive and supervise brushless DC, stepper, or permanent-magnet synchronous motors. Within the broader power management and industrial hierarchy, the PIC32MK sits alongside other 32-bit motor-control families such as the C2000 from Texas Instruments and the STM32F/G series from STMicroelectronics. Key differentiating features include seven 12-bit 3.75 MSPS ADC cores capable of supporting up to 42 analog inputs, four on-chip operational amplifiers, five analog comparators, dedicated motor-control PWM peripherals, dual CAN-FD modules, USB-FS, four I2C, six I2S, and dual-panel Flash with Live Update support. The FPU + DSP pipeline executes 154 DMIPS and supports saturating and fractional arithmetic, single-cycle MAC, and four 64-bit accumulators, enabling real-time field-oriented control (FOC) loops without offloading. The PIC32MK0512MCF100-E/PT supports field-oriented control (FOC) of PMSM/BLDC motors, multi-axis CNC machine control, digital power conversion (solar inverters, SMPS), Industrial IoT edge nodes with CAN-FD, and automotive body/battery management. The dual-panel Flash allows firmware live-update without service interruption - valuable for industrial drives where downtime is costly. Note the -E temperature grade (extended -40C to +125C) and AEC-Q100 qualification distinguish this part from the lower-grade PIC32MK0512MCF100-I/PT. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MK0512MCF100-I/PT

PIC32MK0512MCF100-I/PT - 120MHz 32-Bit MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MK0512MCF100-I/PT is a 32-bit MIPS32 microAptiv MCU delivering up to 120 MHz CPU clock, 512 KB of Flash program memory and 100 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets high-performance motor control, industrial automation, IIoT and multi-channel CAN-FD applications where DSP-like signal processing, FPU math and rich analog peripherals are required. A microcontroller (MCU) is a single-chip processor core with integrated Flash, RAM, peripherals and interrupt logic that runs embedded firmware. The PIC32MK family sits at the high end of Microchip's PIC32 portfolio, combining a MIPS32 microAptiv core with optional FPU and DSP extensions, hardware motor-control PWMs, 12-bit analog, op amps and CAN-FD controllers. The hierarchy is: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family -> motor-control / IIoT subfamily. Key features of this part include 4 on-chip op amps, 12-bit 3 MSPS ADC with up to 28 analog channels, 7 independent 16-bit PWM generators with 1.6 ns resolution, two CAN-FD modules, USB full-speed, and a 12-bit DAC. Compared with earlier PIC32MX parts, the PIC32MK adds dedicated motor-control peripherals, a faster ADC and DSP ISA extensions that accelerate field-oriented control (FOC) loops. Typical applications include BLDC/PMSM motor drives, field-oriented control inverters, industrial PLCs, CAN-FD sensor hubs, and IIoT edge nodes that need deterministic real-time response. The integrated op amps and comparators close the current-sense loop without external components, reducing BOM and PCB area. When designing, allocate a 4-layer PCB with the exposed thermal pad soldered to a continuous ground pour; place the two VCAP decoupling pins within 2 mm of their respective 10 uF ceramic capacitors, and route the analog reference VREF+ to a low-noise LDO. Verify the engine analyzer by running the FOC IDL 1.0 cycles below.

Angebot Kontakt

PIC32MK0512MCF100T-I/PT

PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCF100T-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller operating at 120MHz with 512KB of Flash memory and 100-TQFP (12x12 mm) package. It is part of the PIC32MK family that combines high-performance 32-bit processing with a rich peripheral set targeting motor control, industrial control, and Industrial Internet of Things (IIoT) applications. The device supports 3.3V operation and integrates DSP and FPU capabilities for math-intensive tasks. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable peripherals. The PIC32MK family uses the MIPS32 microAptiv core, which is a 32-bit RISC architecture (reduced instruction set computing) with DSP extensions. Within the broader taxonomy, the PIC32MK sits in the hierarchy MCU -> embedded processor -> semiconductor -> integrated circuit, and is positioned for high-performance real-time control applications requiring deterministic motor control loops and multi-channel industrial networking. Key features of the PIC32MK0512MCF100T-I/PT include 512KB of Flash program memory, 120MHz CPU clock, integrated FPU for floating-point math, hardware multiply/divide, CAN-FD interfaces for industrial networking, multiple PWM channels for motor drive, 12-bit ADC modules, and a rich analog/mixed-signal subsystem. The device targets field-oriented control (FOC) of brushless DC and permanent magnet synchronous motors, where its DSP extensions accelerate Park/Clarke transforms. Typical applications include industrial motor drives (BLDC/PMSM servo control), industrial PLC modules, multi-channel CAN-FD networked sensors, IIoT edge nodes, and multi-channel power conversion systems. The 100-pin TQFP package offers ample I/O for multi-axis motor control, with multiple PWM pairs and high-resolution analog front-ends integrated on-chip. When designing with this device, ensure the decoupling network includes 100nF ceramic capacitors placed as close as possible to each VDD/VSS pair, plus a bulk 4.7uF or 10uF capacitor on the main rail. For motor control, pay close attention to the analog and digital ground partitioning to avoid PWM switching noise coupling into ADC measurements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

Unterkategorien

Produkte (32796)

PIC32MK0512GPG064-E/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

PIC32MK0512GPG064-I/PT - 120MHz MCU, 512KB Flash, 64-TQFP | Microchip

PIC32MK0512GPG064T-I/PT - 120MHz 32-bit MCU 512KB Flash 64-TQFP | Microchip

PIC32MK0512GPG064T-I/R4X - 120 MHz 512KB Flash 32-bit MCU | Microchip

PIC32MK0512GPK064-E/PT - 120MHz 512KB MCU with USB FS | Microchip

PIC32MK0512GPK064-I/MR - 120MHz 512KB MCU, 64-QFN | Microchip

PIC32MK0512GPK064-I/PT - 120MHz 512KB MCU | Microchip Technology

PIC32MK0512GPK064T-E/MR - 120MHz, 512KB Flash MCU | Microchip

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip

PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip

PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip

PIC32MK0512GPK100T-I/PT - 32-bit 120MHz MCU 512KB Flash 100-TQFP | Microchip

PIC32MK0512MCF064 - 120MHz 32-Bit MCU with FPU | Microchip

PIC32MK0512MCF064-E/MR - 32-bit 80MHz MCU 512KB Flash 64-QFN | Microchip

PIC32MK0512MCF064-E/PT - 120MHz 512KB Flash 32-Bit MCU | Microchip

PIC32MK0512MCF064-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

PIC32MK0512MCF064T-E/MR - 80MHz 512KB Flash MCU | Microchip

PIC32MK0512MCF064T-E/PT - 32-bit 80MHz MCU 512KB Flash TQFP-64 | Microchip

PIC32MK0512MCF064T-I/MR - 120MHz 512KB MCU 64-QFN | Microchip

PIC32MK0512MCF064T-I/PT - 32-bit 120MHz MCU 512KB Flash | Microchip

PIC32MK0512MCF100-E/PT - 120MHz 512KB Motor Control MCU | Microchip

PIC32MK0512MCF100-I/PT - 120MHz 32-Bit MCU 512KB Flash TQFP-100 | Microchip

PIC32MK0512MCF100T-I/PT - 32-Bit 120MHz 512KB Flash MCU | Microchip