Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 2398 Produkte 📁 Verstärker-ICs 563 Produkte 📁 Audio-Codecs 16 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 160 Produkte 📁 DSP 913 Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 6556 Produkte 📁 Schnittstellen-ICs 1151 Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 272 Produkte 📁 Speicher-ICs 875 Produkte 📁 Mikrocontroller 18177 Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 0 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 13 Produkte

Produkte (31127)

STM32F469NIH6 - 2MB Flash, 180MHz ARM Cortex-M4F MCU TFBGA-216 | STMicroelectronics
STM32F469NIH6

STM32F469NIH6 - 2MB Flash, 180MHz ARM Cortex-M4F MCU TFBGA-216 | STMicroelectronics

The STMicroelectronics STM32F469NIH6 is a high-performance ARM Cortex-M4F microcontroller with single-precision FPU and DSP instructions, operating at up to 180 MHz, integrating 2 MB of Flash and 384 KB of SRAM in a 216-ball TFBGA (13x13 mm) package. The Cortex-M4 core delivers 225 DMIPS / 608 CoreMark and includes a Chrom-ART Accelerator for graphics offload, a TFT LCD controller up to XGA, and a MIPI-DSI host for direct-display connection. On-board crypto acceleration (AES 128/192/256, DES, 3DES, SHA-1, MD5) and a true random number generator (TRNG) enable secure connectivity. The 216-ball TFBGA is the largest pin-count variant in the STM32F469 line, exposing the full set of peripherals and bus interfaces for industrial HMI designs. A microcontroller (MCU) is a compact integrated circuit that combines a processor core (here, an ARM Cortex-M4F), program memory (Flash), working memory (SRAM), and programmable peripherals to govern an embedded system. The STM32F469NIH6 sits within the STM32F4 family of 32-bit ARM Cortex-M microcontrollers, which occupies the high-performance tier of the broader STM32 portfolio - above Cortex-M0/M0+ entry devices but below Cortex-M7 lines such as STM32H7 in raw DMIPS. Key features distinguishing this device include the integrated LCD-TFT controller with MIPI-DSI support, dedicated hardware JPEG codec, USB 2.0 OTG full- and high-speed with on-chip PHY, two CAN 2.0B interfaces, and a camera interface for parallel CMOS sensors. The 2 MB dual-bank Flash allows field firmware updates with rollback, while 384 KB of SRAM (including 64 KB of CCM SRAM) accommodates graphics frame buffers and audio sample buffers without external memory. Architecturally, the part is built on a 90 nm CMOS process with an adaptive real-time ART Accelerator achieving equivalent 0 wait-state execution from Flash. The supply range of 1.7 V to 3.6 V covers battery and 3.3 V-rail designs; four low-power modes (Sleep, Stop, Standby, VBAT) allow deep current reduction when the display and peripherals are idle. Typical applications include industrial human-machine interfaces (HMIs), point-of-sale terminals, smart appliances with GUI, portable medical instrumentation, and IoT gateways requiring both display and TLS-class security. The cryptographic accelerators and TRNG also suit payment terminals and secure connectivity modules. Designers should note that the 216-ball TFBGA requires a 4-layer or thicker PCB with via-in-pad or dog-bone fan-out, plus four decoupling caps (100 nF X7R) within 2 mm of each VDD/VSS pair. For timing accuracy, use the on-chip 16 MHz HSI trimmed via the 32 kHz LSE crystal - or supply an external HSE crystal up to 26 MHz that the PLL multiplies to 180 MHz. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - including 1:1 board-level migration paths to the pin-compatible STM32F479 and STM32F769 variants.

USD $9,20 Auf Lager
STM32F469ZIT6 - 180MHz Cortex-M4 MCU 2MB Flash | ST
STM32F469ZIT6

STM32F469ZIT6 - 180MHz Cortex-M4 MCU 2MB Flash | ST

The STMicroelectronics STM32F469ZIT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU running at up to 180 MHz, featuring 2 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP (20x20 mm) package. An MCU (microcontroller unit) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest complete computing tier in the embedded hierarchy: microcontroller -> embedded processor -> system-on-chip. The STM32 family is STMicroelectronics' mainstream 32-bit MCU platform built on the ARM Cortex-M architecture, one of the most widely adopted embedded ecosystems in industry. Key features of the STM32F469 line include the ART Accelerator and Chrom-ART graphical hardware accelerator for high-resolution GUI performance, an integrated TFT LCD controller and MIPI DSI host controller, and ST's adaptive real-time memory accelerator that enables zero-wait-state execution from Flash at 180 MHz. The Cortex-M4 core includes single-cycle multiply-accumulate DSP instructions and a hardware floating-point unit (FPU), making it efficient for signal processing alongside control tasks. Technically, the STM32F469 series is based on the proven STM32F429 platform with enhanced graphics and display capabilities, operating from a 3.3V supply. According to the ST product page, the STM32F469xx devices are based on the high-performance Arm Cortex-M4 32-bit RISC core operating at up to 180 MHz. The 144-LQFP package offers abundant GPIO and peripheral interfaces for complex designs while remaining hand-solderable relative to ball-grid packages. Typical applications include industrial HMI panels and TFT displays, consumer appliances with GUIs, medical monitoring devices, building automation, and motor control systems requiring a blend of graphics, connectivity, and real-time control. A key design consideration is power integrity: the device requires decoupling capacitors on all VDD pins and careful PCB layout of the VCAP pins for the internal 1.2V core regulator. Firmware development is supported by STM32CubeMX and STM32CubeIDE free tooling. This page synthesizes distributor pricing, verified drop-in alternatives within the STM32F4 family, and practical design notes not found in a single manufacturer document.

USD $17,83 Auf Lager
STM32F479BGT6 - 32-bit ARM Cortex-M4F MCU, 2MB Flash, 180MHz | STMicroelectronics
STM32F479BGT6

STM32F479BGT6 - 32-bit ARM Cortex-M4F MCU, 2MB Flash, 180MHz | STMicroelectronics

The STMicroelectronics STM32F479BGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4F core with floating-point unit (FPU), operating at up to 180 MHz. It integrates 2 MB of flash memory and 384 KB of SRAM, making it suitable for complex applications requiring substantial code and data storage. The device is housed in a 208-pin LQFP package (LQFP208) with a 28x28 mm body, offering extensive I/O and connectivity options. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F479BGT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit flash microcontrollers. These devices are based on the ARM Cortex-M processor architecture, providing a balance of performance, power efficiency, and rich peripheral integration for applications ranging from industrial control to consumer electronics. Key features of the STM32F479BGT6 include a 180 MHz ARM Cortex-M4F core with DSP instructions and a single-precision FPU, 2 MB of dual-bank flash memory, 384 KB of SRAM, and a flexible memory controller (FMC) supporting external memory. It offers a comprehensive set of peripherals: multiple 12-bit ADCs, DACs, timers, communication interfaces (USART, SPI, I2C, CAN, USB OTG, Ethernet MAC), and a camera interface. The device also includes a cryptographic acceleration unit and a true random number generator (TRNG) for security applications. The STM32F479BGT6 leverages ST's advanced 90nm process technology, enabling high clock speeds with low power consumption. The ART Accelerator™ allows zero-wait-state execution from flash memory, maximizing performance. The device supports a wide operating voltage range (1.7V to 3.6V) and temperature range (-40°C to +85°C), making it robust for industrial environments. Typical applications include industrial automation, motor control, medical devices, consumer electronics, IoT gateways, and audio processing. The rich connectivity and high-speed ADC make it ideal for data acquisition systems and real-time control loops. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports multiple low-power modes, which can be leveraged to optimize energy consumption in battery-powered applications. Careful PCB layout is essential to minimize noise and ensure reliable operation at 180 MHz.

USD $8,10 Auf Lager
STM32F479NIH6 - 180MHz ARM Cortex-M4F MCU with TFT-LCD & Crypto | STMicroelectronics
STM32F479NIH6

STM32F479NIH6 - 180MHz ARM Cortex-M4F MCU with TFT-LCD & Crypto | STMicroelectronics

The STMicroelectronics STM32F479NIH6 is a high-performance ARM Cortex-M4F based microcontroller with DSP and FPU instructions, operating at up to 180 MHz. It is housed in a 216-ball TFBGA package (NIH) and provides a rich set of peripherals including a TFT-LCD controller, hardware cryptographic accelerator, and a camera interface. The device integrates up to 2 MB of Flash memory and 384 KB of SRAM, making it suitable for advanced embedded applications requiring high processing power and graphics capabilities. An ARM Cortex-M4F microcontroller is a 32-bit processor core designed for embedded systems that require efficient digital signal processing (DSP) and floating-point arithmetic. The 'F' suffix indicates the presence of a hardware floating-point unit (FPU), which accelerates mathematical operations. In the STM32F4 series, the Cortex-M4F core is complemented by a rich set of peripherals, making it a popular choice for industrial control, consumer electronics, and IoT devices. The STM32F479NIH6 sits at the top of the STM32F4 family, offering the highest performance and memory capacity. Key features include a 180 MHz CPU with 225 DMIPS/1.25 DMIPS/MHz, a Chrom-ART Accelerator for 2D graphics, a TFT-LCD controller supporting up to XGA resolution, and a hardware cryptographic processor supporting AES, DES, 3DES, and hash functions. The device also includes a true random number generator (TRNG), a camera interface, and multiple communication interfaces including Ethernet, USB OTG HS/FS, CAN, SPI, I2C, USART, and SDIO. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C (industrial grade). The STM32F479NIH6 is built on ST's advanced 90nm process technology, balancing performance and power consumption. The Cortex-M4F core with FPU enables efficient execution of complex algorithms, while the Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving overall system performance. The hardware cryptographic accelerator provides secure data encryption without burdening the CPU, making it ideal for secure communication applications. Typical applications include high-end human-machine interfaces (HMI), industrial automation, medical devices, smart home gateways, and IoT edge nodes. The TFT-LCD controller and graphics accelerator make it particularly well-suited for graphical user interfaces, while the cryptographic features enable secure data transmission in connected devices. When designing with this device, ensure adequate decoupling on all power supply pins and follow the recommended layout guidelines in the datasheet for the TFBGA package. The device supports multiple low-power modes, allowing designers to optimize power consumption for battery-powered applications.

USD $11,75 Auf Lager
STM32F722RET6 - 216MHz ARM Cortex-M7 MCU | STMicroelectronics
STM32F722RET6

STM32F722RET6 - 216MHz ARM Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F722RET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 512 KB of flash memory and 256 KB of SRAM, making it suitable for demanding applications such as motor control, industrial automation, and advanced IoT devices. The device is housed in a 64-pin LQFP package (LQFP64) with a 10x10 mm body and 0.5 mm pitch, offering a compact footprint for space-constrained designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple 8-bit devices to high-performance 32-bit and 64-bit cores. The STM32F722RET6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy places it within the embedded processing domain, specifically as a high-performance MCU for real-time control and signal processing. Key features of the STM32F722RET6 include a 216 MHz Cortex-M7 core with double-precision floating-point unit (FPU), 512 KB flash, 256 KB SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including USART, SPI, I2C, CAN, USB OTG HS/FS, and Ethernet MAC. The device also includes advanced analog peripherals such as 12-bit ADCs, DACs, and comparators, along with a camera interface and a true random number generator (TRNG). These features enable high-speed data processing and connectivity in complex embedded systems. From a technical depth perspective, the STM32F722RET6 leverages the ARM Cortex-M7 architecture with a 6-stage pipeline and a branch prediction unit, delivering 7 CoreMark/MHz performance. The inclusion of a double-precision FPU accelerates mathematical computations, making it ideal for audio processing, motor control algorithms, and digital signal processing. The device also features an instruction cache and data cache to optimize memory access, reducing latency and improving overall system throughput. Typical applications include industrial motor control, robotics, advanced human-machine interfaces (HMI), audio processing, and high-end IoT gateways. The combination of high clock speed, ample memory, and rich peripherals allows designers to implement complex algorithms and connectivity stacks without external components. For instance, in motor control, the 216 MHz core can execute field-oriented control (FOC) algorithms with high precision, while the integrated timers and ADCs provide accurate feedback. When designing with this device, ensure proper power supply decoupling with 100 nF capacitors close to each VDD pin and a 4.7 uF bulk capacitor. The device supports a supply voltage range of 1.7V to 3.6V, and the internal regulator requires a 1 uF capacitor on VCAP pins. Pay attention to the boot configuration pins to select the correct boot source, and use the internal or external oscillator as per the application requirements.

USD $8,10 Auf Lager
STM32F722ZET6 - 512KB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics
STM32F722ZET6

STM32F722ZET6 - 512KB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F722ZET6 is a high-performance ARM Cortex-M7 based microcontroller with a maximum clock speed of 216 MHz, delivering 462 DMIPS and 1082 CoreMark. It features 512 KB of flash memory and 256 KB of SRAM, making it suitable for complex embedded applications requiring substantial processing power and memory. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, offering a rich set of peripherals including multiple USARTs, SPIs, I2Cs, ADCs, DACs, timers, and advanced connectivity options like USB OTG HS/FS, Ethernet MAC, and camera interface. An ARM Cortex-M7 microcontroller is a high-performance 32-bit processor core designed for embedded systems that demand intensive computation, such as digital signal processing, motor control, and graphical user interfaces. The Cortex-M7 core features a 6-stage pipeline, branch prediction, and optional double-precision floating-point unit (FPU), enabling efficient execution of complex algorithms. In the system hierarchy, the STM32F722ZET6 sits at the application processor level, interfacing with memory, peripherals, and external devices to control and process data in real-time. Key features of the STM32F722ZET6 include a 216 MHz CPU with a single-precision FPU, 512 KB flash, 256 KB SRAM, and a comprehensive set of peripherals. It supports a wide supply voltage range of 1.7V to 3.6V, operates over a temperature range of -40°C to +85°C, and includes advanced security features such as a true random number generator (TRNG) and a cryptographic acceleration cell. The device also features a Chrom-ART Accelerator for enhanced graphical performance, making it ideal for human-machine interface (HMI) applications. Technically, the STM32F722ZET6 is built on a 90nm process technology, offering a balance between performance and power consumption. It includes a memory protection unit (MPU) for enhanced reliability, a direct memory access (DMA) controller with up to 16 channels, and a flexible memory controller (FMC) supporting external memory interfaces. The device also integrates a 12-bit ADC with up to 24 channels, two 12-bit DACs, and multiple 16-bit and 32-bit timers, providing precise analog and timing control. Typical applications include industrial control systems, motor drives, advanced human-machine interfaces, IoT gateways, audio processing, and high-end consumer electronics. The combination of high clock speed, ample memory, and rich peripherals makes it a versatile choice for designers requiring a powerful MCU in a compact package. When designing with the STM32F722ZET6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor on the main supply. The device supports multiple low-power modes, including Sleep, Stop, and Standby, which can be leveraged to optimize energy consumption in battery-powered applications.

USD $6,23 Auf Lager
STM32F723ZET6 - 512KB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics
STM32F723ZET6

STM32F723ZET6 - 512KB Flash, 216MHz ARM Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F723ZET6 is a high-performance ARM Cortex-M7 based microcontroller with a maximum clock speed of 216 MHz, delivering 462 DMIPS and 1082 CoreMark. It features 512 KB of Flash memory and 256 KB of SRAM, making it suitable for complex embedded applications requiring substantial code and data storage. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, providing ample I/O for peripheral-rich designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple 8-bit devices in household appliances to advanced 32-bit and 64-bit cores in automotive, industrial, and IoT applications. The STM32F723ZET6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, positioned between the mainstream STM32F4 series and the high-performance STM32H7 series. Key features of the STM32F723ZET6 include a 216 MHz Cortex-M7 core with double-precision floating-point unit (FPU), a Chrom-ART Accelerator for enhanced graphics, and a TFT-LCD controller supporting up to XGA resolution. It also integrates a hardware cryptographic accelerator (AES, DES, 3DES, SHA-1, SHA-256, MD5), a true random number generator (TRNG), and a camera interface. The device supports a wide range of communication interfaces including Ethernet MAC, USB OTG HS/FS, CAN, SPI, I2C, UART, and SDMMC, making it highly versatile for connectivity-centric applications. Technically, the STM32F723ZET6 is built on a 40nm process technology, offering a balance of performance and power efficiency. It operates from a 1.7V to 3.6V power supply and features multiple low-power modes (Sleep, Stop, Standby) to optimize energy consumption. The device includes a 12-bit ADC with up to 24 channels, a 12-bit DAC, and advanced timers for precise motor control and waveform generation. The Chrom-ART Accelerator offloads the CPU for 2D graphics operations, enabling smooth GUI rendering without burdening the core. Typical applications include industrial control systems, human-machine interfaces (HMIs), medical devices, smart home gateways, and audio processing. The combination of high clock speed, rich peripherals, and graphics acceleration makes it ideal for applications requiring real-time processing and rich user interfaces. For instance, in an HMI application, the TFT-LCD controller and Chrom-ART Accelerator enable smooth rendering of graphical elements, while the Ethernet MAC provides connectivity for remote monitoring. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin must be connected to a clean analog supply, and the VCAP pins require external capacitors as specified in the datasheet. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the STM32F7 hardware development application note (AN4666) to maintain signal integrity.

USD $8,10 Auf Lager
STM32F730R8T6 - 32-bit ARM Cortex-M7 MCU 64-pin LQFP | STMicroelectronics
STM32F730R8T6

STM32F730R8T6 - 32-bit ARM Cortex-M7 MCU 64-pin LQFP | STMicroelectronics

The STMicroelectronics STM32F730R8T6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It is housed in a 64-pin LQFP package and provides 64 KB of Flash memory and 256 KB of SRAM. This device is part of the STM32F7 series, designed for applications requiring advanced processing power, rich connectivity, and real-time performance. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F730R8T6 belongs to the STM32F7 family, which is positioned as a high-performance MCU line within the broader STM32 ecosystem. The Cortex-M7 core is a high-performance 32-bit processor that supports DSP instructions and a floating-point unit (FPU), making it suitable for digital signal processing and control applications. Key features of the STM32F730R8T6 include a 216 MHz Cortex-M7 core with double-precision FPU, 64 KB Flash, 256 KB SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including USART, SPI, I2C, USB OTG HS/FS, CAN, and SDMMC. The device also includes advanced analog peripherals such as 12-bit ADCs and DACs, as well as timers, PWM channels, and a cryptographic acceleration unit. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C. The STM32F730R8T6 is built on STMicroelectronics' advanced 90nm process technology, offering a balance of performance and power efficiency. The Cortex-M7 core with FPU and DSP instructions enables efficient execution of complex algorithms, while the ART Accelerator™ ensures zero-wait-state execution from Flash memory. The device also features a memory protection unit (MPU), a direct memory access (DMA) controller, and a flexible clock tree with multiple PLLs. Typical applications include industrial control, motor drives, IoT gateways, audio processing, and consumer electronics. The rich connectivity and high processing power make it suitable for applications requiring real-time control and communication. For example, in industrial automation, the STM32F730R8T6 can handle complex control loops and communicate over multiple protocols simultaneously. When designing with this device, ensure proper decoupling of the power supply pins and a stable clock source. The internal RC oscillator can be used for basic operation, but an external crystal is recommended for applications requiring precise timing. The device supports various low-power modes, which can be leveraged to optimize energy consumption in battery-powered applications.

USD $5,44 Auf Lager
STM32F733VET6 - 32-bit ARM Cortex-M7 MCU 512KB Flash | STMicroelectronics
STM32F733VET6

STM32F733VET6 - 32-bit ARM Cortex-M7 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F733VET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 512 KB of Flash memory and 256 KB of SRAM, making it suitable for demanding applications such as industrial control, motor drives, and advanced human-machine interfaces. The device is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, providing a compact yet powerful solution for embedded systems. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits. The STM32F733VET6 is part of the STM32F7 series, which is known for its high performance and advanced connectivity, positioning it as a top-tier MCU for complex applications. Key features of the STM32F733VET6 include a floating-point unit (FPU) for single-precision arithmetic, a memory protection unit (MPU), and a rich set of peripherals such as multiple USARTs, SPIs, I2Cs, CAN, USB OTG, and Ethernet MAC. It also includes advanced analog peripherals like 12-bit ADCs and DACs, as well as timers with PWM generation capabilities. The device supports a wide supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C, making it suitable for industrial environments. Technically, the STM32F733VET6 leverages the ARM Cortex-M7 architecture with a 6-stage pipeline and branch prediction, delivering 462 DMIPS at 216 MHz. It includes a hardware cryptographic accelerator for AES, DES, and hash algorithms, enhancing security for IoT applications. The device also features a Chrom-ART Accelerator for 2D graphics, which offloads the CPU for graphical user interfaces. With its high clock speed and rich peripherals, the STM32F733VET6 excels in real-time control and signal processing tasks. Typical applications include industrial automation, motor control, medical devices, and high-end consumer electronics. For instance, in motor control, the advanced timers and ADC synchronization enable precise field-oriented control (FOC) of brushless DC motors. In medical devices, the high processing power supports complex algorithms for patient monitoring. The device's connectivity options also make it ideal for IoT gateways and smart home hubs. When designing with the STM32F733VET6, ensure proper decoupling of the power supply with 100 nF capacitors close to each VDD pin and a 4.7 uF bulk capacitor. The VDDA pin should be filtered with a ferrite bead and capacitor to reduce analog noise. Additionally, the BOOT0 pin configuration must be set correctly for desired boot mode, and the NRST pin should have a 100 nF capacitor to ground for reliable reset.

USD $8,10 Auf Lager
STM32F745VET6 - 32-bit ARM Cortex-M7 MCU, 512KB Flash | STMicroelectronics
STM32F745VET6

STM32F745VET6 - 32-bit ARM Cortex-M7 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F745VET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 512 KB of Flash memory and 320 KB of SRAM, making it suitable for complex embedded applications requiring significant processing power and memory. The device is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, providing a compact yet accessible footprint for PCB design. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern embedded systems, ranging from simple household appliances to complex industrial automation and automotive control units. The STM32F745VET6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers based on ARM Cortex-M cores. This hierarchy places it within the ARM Cortex-M7 category, known for its high performance and DSP capabilities. Key features of the STM32F745VET6 include a 216 MHz Cortex-M7 core with double-precision floating-point unit (FPU), a comprehensive set of communication interfaces (USART, SPI, I2C, CAN, USB OTG, Ethernet MAC), advanced analog peripherals (3x 12-bit ADCs, 2x DACs), and a flexible memory controller supporting external SRAM, PSRAM, NOR, and NAND Flash. The device also includes a Chrom-ART Accelerator for enhanced graphical user interface performance, a cryptographic acceleration unit (AES, DES, 3DES, SHA-1, SHA-256, MD5), and a true random number generator (TRNG). These features make it ideal for applications requiring high-speed data processing, connectivity, and security. Technically, the STM32F745VET6 is built on a 90 nm process technology, offering a balance between performance and power consumption. It supports a wide operating voltage range of 1.7V to 3.6V and an extended temperature range of -40°C to +85°C (industrial grade). The device includes a power-on reset (POR), power-down reset (PDR), and a brownout detector (BOD) for reliable power management. The Cortex-M7 core with FPU and DSP instructions enables efficient execution of complex algorithms, such as digital signal processing and motor control. Typical applications include industrial control systems, motor drives, IoT gateways, audio processing, and high-end consumer electronics. The rich peripheral set and high clock speed make it suitable for real-time control and data acquisition. For instance, in an industrial PLC, the STM32F745VET6 can handle multiple communication protocols simultaneously while executing control loops at high frequency. When designing with this device, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1 uF capacitor. Also, consider the thermal performance of the LQFP100 package; for high-power applications, provide adequate copper pour on the PCB to dissipate heat.

USD $8,10 Auf Lager
STM32F745ZGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash, 216MHz | STMicroelectronics
STM32F745ZGT6

STM32F745ZGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash, 216MHz | STMicroelectronics

The STM32F745ZGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core with a floating-point unit (FPU) and DSP instructions. It operates at a maximum frequency of 216 MHz, delivering 462 DMIPS and 2.14 CoreMark/MHz performance. The device integrates 1 MB of flash memory and 320 KB of SRAM, making it suitable for complex real-time applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F745ZGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This family is widely used in industrial, consumer, and automotive applications due to its balance of performance, power efficiency, and peripheral integration. Key features include a Chrom-ART Accelerator for 2D graphics, a TFT LCD controller, a camera interface, and a true random number generator (TRNG). It also provides a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 2x SAI. The device supports up to 168 GPIO pins and includes multiple 12-bit ADCs, DACs, timers, and a DMA controller. The STM32F745ZGT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It features a power supply range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C. The device includes a flexible memory controller (FMC) for external memory expansion, supporting SDRAM, NOR, and NAND flash. Typical applications include industrial control systems, motor drives, power inverters, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high performance and rich peripheral set make it ideal for applications requiring real-time processing and connectivity. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the recommended PCB layout guidelines in the datasheet. The device supports various low-power modes, including Sleep, Stop, and Standby, which can be leveraged to optimize energy consumption in battery-powered applications.

USD $8,10 Auf Lager
STM32F746BET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics
STM32F746BET6

STM32F746BET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics

The STM32F746BET6 is a high-performance 32-bit microcontroller from STMicroelectronics, built around the ARM Cortex-M7 core with a floating-point unit (FPU) and DSP instructions. It operates at a maximum clock frequency of 216 MHz and integrates 512 KB of flash memory and 256 KB of SRAM. The device is housed in a 208-pin LQFP package (28x28 mm) and supports a supply voltage range of 1.8V to 3.6V, making it suitable for a wide range of embedded applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F7 series represents the high-performance tier of STMicroelectronics' STM32 family, positioned above the mainstream F4 series and the low-power L4 series. Within the STM32F7 family, the STM32F746 is a flagship model offering a rich set of connectivity and multimedia features, including a TFT-LCD controller, a camera interface, and an Ethernet MAC. Key features of the STM32F746BET6 include the 216 MHz Cortex-M7 core with double-precision FPU, a Chrom-ART Accelerator for 2D graphics, an L1 cache (I-Cache and D-Cache), and support for external SDRAM. The device also integrates a comprehensive set of peripherals: multiple USARTs, SPIs, I2Cs, a USB 2.0 OTG HS/FS, an Ethernet MAC, a camera interface, and a 12-bit ADC with up to 24 channels. The TFT-LCD controller supports up to XGA resolution, enabling rich graphical user interfaces. From a technical architecture perspective, the Cortex-M7 core is a 6-stage, dual-issue pipeline processor that delivers 2.14 CoreMark/MHz, significantly outperforming the Cortex-M4. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, freeing processing power for application tasks. The L1 cache reduces latency for frequently accessed code and data, improving overall system performance. The device also includes a memory protection unit (MPU) and a Nested Vectored Interrupt Controller (NVIC) for efficient interrupt handling. Typical applications for the STM32F746BET6 include industrial control systems, motor drives, home automation, smart appliances, audio processing, and human-machine interfaces (HMIs). Its combination of high CPU performance, rich connectivity, and graphics capabilities makes it ideal for applications requiring real-time control and advanced user interfaces. For example, in an industrial HMI, the TFT controller and Chrom-ART Accelerator enable smooth rendering of complex dashboards, while the Ethernet MAC provides connectivity to factory networks. When designing with this device, ensure adequate decoupling of the power supply pins with 100nF and 4.7uF capacitors placed close to the VDD pins. The VDDA pin must be connected to a clean analog supply, and the VCAP pins require a 2.2uF capacitor for the internal voltage regulator. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the STM32F7 hardware development application note (AN4666) to ensure signal integrity.

USD $14,49 Auf Lager
STM32F746BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash, LQFP-208 | STMicroelectronics
STM32F746BGT6

STM32F746BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash, LQFP-208 | STMicroelectronics

The STMicroelectronics STM32F746BGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller operating at up to 216 MHz, integrating 1 MB of on-chip Flash memory and an FPU plus DSP instructions, housed in a 208-pin LQFP (28x28 mm) package. The device belongs to the STM32F7 mainstream performance line and includes a Chrom-ART graphics accelerator, an LCD-TFT controller, and the ART Accelerator (instruction cache + prefetch) that enables near-zero-wait execution from Flash at 216 MHz, effectively delivering 1080 CoreMark performance per the ST line card. What is an ARM Cortex-M7 MCU? The Cortex-M7 is a high-end Arm Cortex-M core featuring a 6-stage superscalar pipeline, single/double-precision FPU, DSP extensions, branch prediction, and tightly coupled memories (TCM). It sits above Cortex-M4 in the M-class taxonomy (Cortex-M0/M0+/M3/M4/M7/M33/M85) and enables signal-processing and graphics workloads that M-class cores could not address. STM32F746BGT6 integrates this core with ST's ART Accelerator, DCMI, USB 2.0 OTG, Ethernet MAC, CAN, SDMMC and crypto/hash accelerators, making it a system-on-chip for advanced HMI and IoT edge nodes. Key features of the STM32F746BGT6 include 1 MB Flash, 320 KB SRAM, a 216 MHz CPU with double-precision FPU, an LCD-TFT controller up to XGA resolution, USB OTG HS and FS, two CAN 2.0B interfaces, an Ethernet MAC with 10/100 Mbit support, three 12-bit 2.4 MSPS ADCs, two 12-bit DACs, SDMMC, USART, SPI, I2C, SAI, audio PLL, and an integrated crypto/hash block (AES-256, SHA-256, TRNG). Package is LQFP-208 (28x28 mm). The architecture pairs the Cortex-M7 core with the ART Accelerator (instruction cache + prefetch buffer) and 16 KB I-cache plus 16 KB D-cache. Two DMA controllers with FIFOs offload peripheral transfers, and a flexible memory controller (FMC) interfaces external SRAM, NOR, NAND, and PSRAM. The Chrom-ART accelerator offloads 2D graphics operations, complementing the hardware JPEG codec and LCD-TFT controller for HMI applications without burdening the CPU. Typical applications include industrial HMI panels, medical patient monitors, smart-home gateways, building automation controllers, point-of-sale terminals, and graphics-enabled IoT appliances. The 1 MB Flash and 320 KB SRAM allow rich graphical stacks such as TouchGFX or LVGL to run natively. When designing with this device, ensure the 208-pin LQFP layout supports minimum 4-layer PCB with continuous ground plane beneath the exposed thermal pad area for heat spreading and signal return paths. Use the HAL/LL drivers and STM32CubeMX for peripheral configuration. This page synthesizes distributor pricing, drop-in alternatives within the STM32F7 family, and practical design notes not found in the manufacturer datasheet.

USD $11,05 Auf Lager
STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176
STM32F746IGT6

STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

The STMicroelectronics STM32F746IGT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz with 1 MB of Flash and 340 KB of SRAM, housed in a 176-pin LQFP (24x24 mm) industrial-grade package. The device integrates a double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), an ART Accelerator for zero-wait-state execution from Flash, and a Chrom-ART graphics engine for TFT and JPEG codec acceleration. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, peripherals, and I/O. The Cortex-M7 family is an ARM architecture targeting deterministic embedded systems with DSP and SIMD extensions and an optional hardware floating-point unit. The STM32F7 line in the broader STM32 taxonomy sits under 32-bit Cortex-M, then microcontrollers, then microprocessors, then semiconductors. It is a step above Cortex-M4 parts and below Cortex-M33/M85 sub-1 GHz wireless variants, sharing the same instruction set but adding dual-issue pipelines, branch prediction, and 6-stage superscalar execution. Key features include up to 216 MHz operation, 1 MB on-chip Flash, 340 KB SRAM (including 64 KB CCM SRAM accessible only by the CPU), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB 2.0 OTG full-speed + high-speed with on-chip PHY, 10/100 Ethernet MAC, three CAN 2.0B controllers, an SDMMC interface, an 8- to 14-bit camera interface, and an LCD-TFT controller (up to XGA resolution). Cryptographic acceleration is provided through AES-128/192/256, Triple-DES, and hash (SHA-1/MD5) plus True Random Number Generator (TRNG) hardware. The architecture uses a Harvard bus matrix with separate I/D buses, a multi-layer AHB/AXI interconnect to give the CPU simultaneous access to Flash, SRAM, and peripherals, plus a dedicated DMA controller (two DMA controllers, each with 8 streams) for memory-to-memory/peripheral-to-memory transfers without CPU load. The TFT-LCD controller, JPEG codec, and SDMMC interface are tied to the AXI bus for high throughput, while analog peripherals sit on APB. Typical applications include HMI touch panels, industrial motor control drives, patient monitors, smart-grid energy meters, IP cameras with MJPEG streaming, barcode scanners, GNSS receivers, and consumer appliances needing TFT display + Ethernet connectivity. The 1 MB Flash is sufficient for full LVGL graphical stacks, and the Chrom-ART accelerator frees the CPU for application logic. Design considerations include mandatory 1.8V/2.5V/3.3V rail sequencing on VDD/VDDA pins, the need for a 32.768 kHz LSE crystal for RTC accuracy, and BOOT0 strap selection for Flash vs System memory bootloader boot. PCB layout requires a continuous GND plane under the LQFP and four-layer stack-up with dedicated power islands for VDDA to keep ADC SNR above 60 dBFS. This page synthesizes distributor pricing as of 2026-10-10, drop-in LQFP-176 same-package alternatives from the STM32F7 family, and practical PCB design guidance not collected in the manufacturer datasheet.

USD $13,76 Auf Lager
STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F746NGH6

STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F746NGH6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a rich set of peripherals including TFT-LCD controller, JPEG codec, Ethernet MAC, camera interface, and multiple communication interfaces. The device is housed in a 216-ball TFBGA package (H6 suffix) with a 13x13 mm footprint, offering a compact solution for advanced embedded applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in automotive systems, industrial controls, consumer electronics, and IoT devices. The STM32F746NGH6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs, positioned as a high-performance option within the STM32 portfolio. Key features of the STM32F746NGH6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for advanced graphics. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 1x camera interface. The device also features a TFT-LCD controller supporting up to XGA resolution, a JPEG codec, and a true random number generator (TRNG). Technically, the STM32F746NGH6 is built on a 40nm process technology, enabling high clock speeds with low power consumption. It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a power management unit with multiple low-power modes. The device supports a supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C (H6 suffix indicates industrial temperature grade). Typical applications include high-end consumer electronics, industrial automation, motor control, medical devices, and IoT gateways. The combination of high processing power, rich connectivity, and advanced graphics capabilities makes it ideal for human-machine interfaces (HMI), audio processing, and real-time control systems. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the layout guidelines in the datasheet for the TFBGA package. The device requires a 25 MHz crystal for the HSE oscillator and supports an internal 16 MHz HSI oscillator for cost-sensitive designs.

USD $18,30 Auf Lager
STM32F746ZGT6 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746ZGT6

STM32F746ZGT6 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, featuring 1 MB of Flash and 320 KB of SRAM (plus 16 KB DTCM), packaged in a 144-pin LQFP (20x20 mm). It integrates a single-precision FPU, a full DSP instruction set, the ART Accelerator with 6 KB instruction and 6 KB data caches, and a Chrom-ART Accelerator (DMA2D) for 2D graphics, while delivering up to 462 DMIPS / 1082 CoreMark. The device exposes an LCD-TFT controller with capacitive multi-touch support, an Ethernet MAC with IEEE 1588, USB OTG HS and FS, dual CAN 2.0B, a camera interface, SPDIFRX, and dual 12-bit DACs alongside three 12-bit ADCs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy: semiconductor -> integrated circuit -> microcontroller -> 32-bit MCU. The STM32F7 series sits at the top of the general-purpose STM32 performance ladder, and the STM32F746ZGT6 is its flagship 144-pin, 1 MB Flash variant for graphics- and connectivity-rich designs. Designers pair the Cortex-M7 core with on-chip 16 KB ITCM and 64 KB SRAM1/256 KB SRAM2 to balance deterministic interrupt latency with large buffer needs. Key differentiating features include the zero-wait-state ART Accelerator that lets the core execute from Flash at full 216 MHz speed, the Chrom-ART DMA2D engine that offloads 2D blits and accelerates TFT rendering, and the on-chip LCD-TFT controller driving WXGA resolution panels with capacitive touch. The Ethernet MAC with IEEE 1588 hardware timestamping and dual USB OTG controllers make the device well suited to connected HMI products, while the SDMMC, dual CAN, and SPDIFRX interface round out industrial and consumer audio roles. Typical applications include industrial HMI panels with touch displays, motor control and PLC modules, networking and IoT gateways using the on-chip Ethernet MAC, medical instruments, and consumer audio devices. The 144-LQFP (20x20) footprint and 1.7V-3.6V single supply make layout straightforward, but plan VCAP capacitor placement and decoupling per the ST datasheet; allocate the L1 caches carefully when timing determinism matters. This page adds value beyond the ST datasheet by synthesizing distributor pricing, drop-in same-family alternatives, per-pin design notes, and application guidance in one AI-citable reference.

USD $12,10 Auf Lager
STM32F746ZGT7 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746ZGT7

STM32F746ZGT7 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT7 is a high-performance 32-bit ARM Cortex-M7 microcontroller running at up to 216 MHz with 1 MB of Flash memory and 320 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It integrates a single-precision floating-point unit (SFPU), a full set of DSP instructions, and the Chrom-ART Accelerator for graphics, making it one of the most capable general-purpose MCUs in the STM32F7 family. A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals such as timers, serial interfaces, and analog converters. MCUs sit at the heart of embedded systems, bridging the gap between sensors, actuators, and communication networks. The STM32F746ZGT7 belongs to the STM32F7 series, which itself is part of the broader STM32 ARM Cortex-M portfolio and the wider class of 32-bit embedded microcontrollers. Key features include the 216 MHz Cortex-M7 core with 1082 CoreMark score, 1 MB Flash, 320 KB SRAM (including 64 KB DTCM and 16 KB ITCM), an LCD-TFT controller with Chrom-ART acceleration, Ethernet MAC with IEEE 1588, USB OTG HS/FS, dual CAN, and up to 168 GPIOs. The integrated FPU and DSP extensions allow efficient implementation of motor control, audio processing, and digital filtering algorithms without an external coprocessor. The device is fabricated on ST's 90 nm embedded Flash process and operates from 1.7 V to 3.6 V, with a flexible power architecture supporting multiple low-power modes down to 1.7 V. The ART Accelerator and L1 cache deliver near-zero-wait-state execution from Flash at 216 MHz, achieving 1082 CoreMark and 462 DMIPS. Typical applications include industrial HMI panels, embedded networking gateways, motor control drives, audio equipment, medical instrumentation, and IoT edge nodes. The combination of Ethernet, CAN, and USB makes it well suited to gateway and protocol-conversion designs. When designing with this MCU, pay close attention to the VCAP decoupling capacitors, the 25 MHz HSE crystal layout, and the power sequencing of VDD, VDDA, and VBAT rails. The 144-pin LQFP package requires careful thermal and ground-plane planning for high-speed USB and Ethernet signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

USD $11,84 Auf Lager
STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics
STM32F750N8H6

STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics

The STMicroelectronics STM32F750N8H6 is an Arm Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, with 64 KB of Flash, 320 KB SRAM, and a single-precision Floating Point Unit. Housed in a 216-pin TFBGA (H6 suffix) package, this STM32F750x8-line device combines high-performance DSP and FPU capability with a Chrom-ART accelerator, peripherals including USB OTG HS/FS, CAN, LCD-TFT, and a camera interface. An Arm Cortex-M7 MCU is a 32-bit microcontroller core designed for high-performance embedded applications, featuring a superscalar pipeline, single-precision floating-point and DSP instructions, and an integrated MPU. The STM32F750 family targets human-machine interface, motor control, and audio applications where deterministic real-time performance, rich connectivity, and large SRAM buffers are required within a low-power envelope. Key features include 216 MHz fCPU with 462 DMIPS, 64 KB Flash with ART Accelerator (zero wait-state execution from Flash), 340 KB total SRAM (320 + 16 + 4 KB), Chrom-ART graphics accelerator for 2D DMA2D, 12-bit ADC up to 2.4 MSPS, two 12-bit DACs, USB OTG Full-Speed and High-Speed with dedicated PHY, two CAN 2.0B interfaces, SDMMC host, and a TFT-LCD controller with dedicated pixel clock. Operating voltage ranges from 1.8 V to 3.6 V. The Cortex-M7 core integrates a double-precision FPU and tightly-coupled memory to deliver deterministic interrupt latency under 20 ns, enabling precise motor-control loops and high-fidelity digital signal processing. The integrated Chrom-ART Accelerator offloads 2D operations from the CPU, freeing cycles for application code while sustaining pixel throughput to a TFT display without CPU intervention. Typical applications include TFT-LCD HMI panels, industrial motor drives, audio processing (MP3/WMA codecs, audio DAC control), point-of-sale terminals, and PLC controllers. The USB OTG HS and CAN 2.0B ports enable connectivity-rich gateways, while the dedicated camera interface and SRAM headroom are well suited to basic image processing. A primary design consideration is power rail sequencing: the MCU integrates a Power-on Reset and brown-out detector that requires VDD to reach the minimum operating threshold before any I/O is driven. Designers should also budget for the external 25 MHz HSE crystal plus 32.768 kHz LSE, since internal HSI alone is too inaccurate for USB and CAN operation in production designs. This page synthesizes distributor pricing from Mouser and LCSC, parametric comparison against same-family STM32F750/F746 variants, and practical layout notes not found in the STM32F750x8 datasheet.

USD $7,10 Auf Lager
STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756BGT6

STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M7 core with DSP and FPU instructions. It operates at up to 216 MHz, providing exceptional computational throughput for demanding embedded applications. The device integrates 1 Mbyte of Flash memory and 320 Kbytes of SRAM, along with a comprehensive set of peripherals including multiple communication interfaces, analog-to-digital converters, and advanced motor control timers. Housed in a 208-pin LQFP package (28x28 mm), it offers extensive I/O capabilities for complex system integration. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F756BGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral richness. The Cortex-M7 core is a high-performance member of the Cortex-M family, featuring a six-stage superscalar pipeline and optional double-precision floating-point unit, making it suitable for applications requiring significant digital signal processing. Key features of the STM32F756BGT6 include a 216 MHz CPU with 2.14 CoreMark/MHz, a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic processor supporting AES, 3DES, and RSA, and a true random number generator. It also provides a camera interface, an LCD-TFT controller, and a wide range of communication peripherals including Ethernet, USB OTG HS/FS, CAN, SPI, I2C, USART, and SAI. The device supports a supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C. From a technical architecture perspective, the STM32F756BGT6 integrates an advanced memory protection unit (MPU), a direct memory access (DMA) controller with up to 16 streams, and a flexible static memory controller (FMC) for external memory expansion. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC, and multiple 16-bit and 32-bit timers. The inclusion of a true random number generator and cryptographic acceleration makes it suitable for secure communication applications. Typical applications for the STM32F756BGT6 include industrial automation and control systems, motor drives, power conversion, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high processing power and rich peripheral set enable complex real-time control and signal processing tasks. When designing with this device, careful attention should be paid to power supply decoupling, with a 100nF capacitor placed close to each power pin and a 4.7uF bulk capacitor on the main supply. The LQFP-208 package requires proper thermal management, and the exposed pad should be connected to ground with adequate vias for heat dissipation.

USD $15,86 Auf Lager
STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756VGT6

STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core running at up to 216 MHz. It integrates 1 MB of flash memory and 320 KB of SRAM, along with a rich set of peripherals including a TFT-LCD controller, camera interface, cryptographic acceleration, and multiple communication interfaces. The device is housed in a 100-pin LQFP package (LQFP100) and operates over a temperature range of -40°C to +85°C. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and industrial automation systems. The STM32F756VGT6 belongs to the STM32F7 series, which is positioned as a high-performance MCU family within the broader STM32 ecosystem, offering a balance of processing power, connectivity, and advanced security features. Key features of the STM32F756VGT6 include a 216 MHz ARM Cortex-M7 core with double-precision floating-point unit (FPU), 1 MB of flash memory, 320 KB of SRAM, and a comprehensive set of peripherals. It supports a TFT-LCD controller with up to XGA resolution, a camera interface, and hardware cryptographic acceleration (AES, DES, 3DES, SHA-1, SHA-256, and true random number generator). The device also includes a 12-bit ADC, 12-bit DAC, multiple timers, and a wide range of communication interfaces such as USART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and SDMMC. From a technical depth perspective, the STM32F756VGT6 leverages the ARM Cortex-M7 architecture, which features a 6-stage pipeline and a branch prediction unit, enabling efficient execution of complex algorithms. The inclusion of a double-precision FPU accelerates floating-point math, making it suitable for digital signal processing (DSP) and motor control applications. The device also incorporates a memory protection unit (MPU) and a cache controller (I-Cache and D-Cache) to optimize performance and reliability. The cryptographic hardware accelerator offloads encryption/decryption tasks from the CPU, enhancing security and throughput. Typical applications for the STM32F756VGT6 include industrial automation, motor control, IoT gateways, smart home devices, medical equipment, and high-end consumer electronics. Its combination of processing power, connectivity, and security features makes it ideal for applications requiring real-time control, advanced user interfaces, and secure data communication. For instance, in an IoT gateway, the STM32F756VGT6 can manage multiple communication protocols (Ethernet, USB, CAN) while running a real-time operating system (RTOS) and handling cryptographic operations for secure cloud connectivity. When designing with the STM32F756VGT6, ensure proper power supply decoupling with 100 nF capacitors close to each VDD pin and a 4.7 µF bulk capacitor. The device requires a 3.3V supply, and the internal regulator can be configured to 1.2V for the core. Pay attention to the VDDA pin for analog peripherals, which should be filtered with a ferrite bead and capacitor. For high-speed interfaces like USB and Ethernet, follow the layout guidelines in the STM32F7 reference manual (RM0385) to maintain signal integrity.

USD $16,95 Auf Lager
STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics
STM32F756ZGT6

STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F756ZGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a comprehensive set of peripherals including Ethernet MAC, USB OTG HS/FS, camera interface, and multiple communication interfaces. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, making it suitable for a wide range of industrial, consumer, and IoT applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. In the hierarchy of computing devices, a microcontroller falls under embedded processors, which are a subset of semiconductor devices. The STM32F7 series represents the high-performance tier of ST's STM32 family, offering the ARM Cortex-M7 core with DSP and FPU instructions for advanced signal processing and control. Key features of the STM32F756ZGT6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for enhanced graphics performance. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 3x I2C, 2x CAN, 1x SDMMC, 1x Ethernet MAC, 1x USB OTG HS, 1x USB OTG FS, and 1x camera interface. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC with 2 channels, and multiple timers including advanced-control timers. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C (T suffix). The STM32F756ZGT6 is built on ST's advanced 90nm process technology, enabling high performance with low power consumption. The Cortex-M7 core with 6-stage pipeline and branch prediction delivers 2.14 CoreMark/MHz, making it one of the fastest MCUs in its class. The device includes a memory protection unit (MPU), a direct memory access (DMA) controller with 16 streams, and a true random number generator (TRNG) for security applications. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving GUI performance in display applications. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and human-machine interfaces (HMI). The Ethernet MAC with IEEE 1588 support enables precise time synchronization in networked industrial systems. The camera interface supports parallel camera sensors for machine vision applications. The USB OTG HS with internal PHY allows high-speed data transfer in portable devices. When designing with this device, ensure adequate decoupling on all power supply pins (VDD, VDDA, VDDUSB) with 100nF and 4.7uF capacitors. The VCAP pins require a 2.2uF capacitor for internal regulator stability. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the datasheet to maintain signal integrity. The device supports multiple boot modes via BOOT0 and BOOT1 pins, which must be configured correctly for firmware programming.

USD $8,10 Auf Lager
STM32F765IGK6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765IGK6

STM32F765IGK6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with single-precision and double-precision FPU, ART Accelerator and 16 Kbytes of I/D-cache, delivering up to 216 MHz core frequency in a 176+25 UFBGA (10x10 mm) package. It integrates 1 Mbyte of embedded Flash and 512 Kbytes of SRAM, achieves 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1), and supports DSP instructions plus a memory protection unit (MPU). The 0-wait-state execution from both internal flash and external memories makes it suitable for deterministic real-time workloads. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. The STM32F765IGK6 belongs to the high-performance Cortex-M7 class of MCUs, which sits above Cortex-M4 devices in the Arm Cortex-M taxonomy and below Cortex-A application processors. Within STMicroelectronics' portfolio, the STM32F7 family is positioned as the high-performance mainstream line between the STM32F4 mainstream line and the STM32H7 very-high-performance line, and is widely used as the controller host for graphics, motor control, audio, and connectivity-rich embedded systems. Key differentiating features include a 16-bit Chrom-ART Accelerator for graphics workloads, dual-mode Quad-SPI flash interface, USB 2.0 OTG full-speed and high-speed with on-chip PHY, two CAN 2.0B interfaces, SDMMC, FMC for external memory, Ethernet MAC, three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, and a crypto/hash hardware accelerator supporting AES, SHA, and 3DES. The integrated L1 cache plus ART Accelerator effectively eliminates the flash wait-state penalty even at 216 MHz. Architecturally the device uses an M7 core with branch prediction, tightly-coupled memory, and a dedicated DMA engine cluster (two DMA controllers with FIFOs). An on-chip DSI host controller and parallel TFT LCD interface give the STM32F765IGK6 strong graphics capability for display-driven HMI designs without an external graphics controller. The wide peripheral set (UART/USART, SPI, I2C, SAI, SPDIF, HDMI-CEC, timers, RTC) covers most industrial, audio, and connectivity bridges. Typical applications include industrial motor drives and frequency inverters, building automation HVAC controllers, medical imaging interfaces, audio processing and consumer audio equipment, DSI-equipped HMI panels, USB-based industrial bridges, and graphics-rich IoT gateways. The 176-ball UFBGA package footprint is shared across the STM32F7 family, enabling drop-in scalability between STM32F765, STM32F767, and STM32F769 density variants. When designing with this part, verify that the 216 MHz core supply (typically 1.7-1.9 V from the internal LDO or external SMPS) is decoupled with low-impedance ceramic caps near each VDD/VSS pair. For high-EMI environments, gate the 25 MHz HSE crystal traces with a guard ring and use the on-chip PLL spread-spectrum option to relax radiated emissions. This page synthesizes real-time distributor pricing, drop-in pin-compatible alternatives, application notes, and design considerations beyond the manufacturer datasheet summary, helping engineers evaluate the STM32F765IGK6 for new designs and as a second-source-qualified replacement.

USD $9,10 Auf Lager
STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765IGT6

STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark, packaged in a 176-pin LQFP (24x24 mm) and integrating 1 MB of Flash and 512 KB of SRAM. Key features include a single-precision and double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), ART Accelerator for flash execution, a Chrom-ART accelerator for 2D graphics, and a JPEG codec. The device integrates extensive connectivity peripherals including three USB 2.0 OTG ports (one with HS PHY), two CAN 2.0B interfaces, an IEEE 802.3-compliant 10/100 Ethernet MAC with dedicated DMA, three I2S interfaces, six SPI ports, and SDMMC support, making it suitable for networked embedded and multimedia applications. The STM32F765 belongs to the Cortex-M7-based STM32F7 family, which targets high-performance embedded applications above the Cortex-M4 tier. Compared with Cortex-M4, the Cortex-M7 superscalar core adds branch prediction, SIMD instructions, and tightly-coupled L1 caches, achieving roughly 2x Dhrystone performance per MHz. The F765 position relative to its siblings F767/F769 brings graphics (Chrom-ART, LTDC, JPEG), Ethernet, USB HS, and DSI while keeping the cost-effective LQFP-176 rather than the higher-pin-count BGA packages. Memory architecture: 1 MB of dual-bank Flash with read-while-write support enables firmware upgrades without downtime, and 512 KB of SRAM is split into 368 KB of general-purpose SRAM plus dedicated 16 KB instruction TCM and 16 KB data TCM for time-critical code. Peripherals include three 12-bit ADCs at 2.4 MSPS each, two 12-bit DACs, multiple timers including HRTIM for power conversion, a 32-bit RTC, and AES-256 + True Random Number Generator hardware cryptography. Typical applications include industrial motor-control and fieldbus nodes, networked gateways and IoT edge devices, graphical HMI panels, audio processing, and high-speed data acquisition. The integrated Ethernet MAC with dedicated DMA enables deterministic real-time networking, while the USB HS PHY simplifies data-loading designs. Design consideration: decoupling is critical - place one 100 nF ceramic per VDD/VDDA pin pair as close as possible, and provide a 4.7 uF bulk capacitor near the regulator. Configure the BOOT0 pin via a 10 kohm pull-down plus a small capacitor to ground to filter transient glitches. This page synthesizes distributor pricing, verified drop-in alternatives within the LQFP-176 family, and field-ready design notes not found on a single datasheet page.

USD $13,10 Auf Lager
STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST
STM32F765VIH6

STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F765VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core operating at up to 216 MHz, with 2 MB of Flash memory, 462 DMIPS of processing performance, and an 8x8 mm 100-ball TFBGA package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, serving as the computational heart of embedded systems. Within the system hierarchy, the STM32F765 belongs to the STM32F7 Series of high-performance MCUs, which sits above mainstream Cortex-M4 families and below multicore application processors, making it the workhorse choice for demanding real-time embedded control. Key features include the Arm Cortex-M7 core with double-precision FPU and Armv7E-M DSP instructions, the adaptive real-time (Art) memory accelerator that achieves 0-wait-state execution from Flash at 216 MHz, and L1 instruction and data caches that maximize performance from external memory. Peripherals include SDRAM interface support, DFSDM (digital filter for sigma-delta modulators), multiple high-speed communication interfaces, and advanced analog blocks suitable for motor control and digital power. Architecturally, the Art Accelerator and 16-Kbyte L1 instruction cache allow the Cortex-M7 to sustain its full 1082 CoreMark/MHz-class throughput even when fetching from on-chip Flash, a key differentiator from earlier Cortex-M families that required SRAM execution for peak performance. The double-precision FPU accelerates scientific and signal-processing math natively without software emulation. Typical applications include industrial motor drives and digital power conversion (leveraging DFSDM and high-resolution timers), medical and test instrumentation requiring 216 MHz DSP throughput, and high-end consumer devices with graphical displays driven via SDRAM and LCD interfaces. A key design consideration: the TFBGA package demands careful PCB design with controlled-impedance fanout, and the low core voltage is generated by an embedded regulator, so follow ST layout guidelines for VCAP capacitors and decoupling. This page synthesizes distributor pricing, verified drop-in alternatives, design guidance, and application notes not consolidated in the manufacturer datasheet.

USD $9,90 Auf Lager