Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 2518 Produkte 📁 Verstärker-ICs 795 Produkte 📁 Audio-Codecs 16 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 289 Produkte 📁 DSP 962 Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 6666 Produkte 📁 Schnittstellen-ICs 1570 Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 305 Produkte 📁 Speicher-ICs 875 Produkte 📁 Mikrocontroller 18693 Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 1 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 13 Produkte

Produkte (32736)

TLV2452AIDGKR - Dual 23uA RRIO Op Amp 220kHz | Texas Instruments
TLV2452AIDGKR

TLV2452AIDGKR - Dual 23uA RRIO Op Amp 220kHz | Texas Instruments

The Texas Instruments TLV2452AIDGKR is a dual, micropower rail-to-rail input/output (RRIO) operational amplifier in an 8-pin VSSOP (MSOP, DGK) package. It operates from 2.7V to 6V single supply (or ±1.35V to ±3V dual supplies) while consuming only 23uA per channel, with a 220kHz gain-bandwidth product and 0.11V/us slew rate. An operational amplifier is a high-gain differential-to-single-ended voltage amplifier and a fundamental building block of analog signal chains, used as buffers, active filters, comparators, and transimpedance amplifiers. Op amps sit within the linear IC hierarchy alongside comparators and voltage regulators; the TLV2452 belongs to the low-power (micropower) op amp family, which prioritizes ultra-low quiescent current for battery-operated systems. Key features include true rail-to-rail input common-mode range and rail-to-rail output swing to within 5mV of each rail at light loads, maximizing dynamic range in low-voltage designs. The A-grade version guarantees a maximum input offset voltage of 1.5mV, and CMOS inputs deliver 1pA typical input bias current for high-impedance sensor interfaces. Micropower 23uA-per-channel consumption directly extends battery life in always-on circuits. Fabricated on a CMOS process, the TLV2452 offers high input impedance with internal ESD protection and is specified from -40C to +125C. The dual-channel DGK-8 package saves board space versus two single amplifiers. According to the TLV245x datasheet (Rev. F), the family also includes shutdown variants for further power savings. Typical applications include battery monitoring, portable medical devices, photodiode amplification, and low-power active filters. Rail-to-rail output allows direct ADC interfacing without level shifting, and the low quiescent current suits IoT always-on sensing. Design tip: decouple the supply with a 0.1uF ceramic close to V+, and remember the 220kHz GBW limits closed-loop bandwidth - keep gains and filter frequencies modest to preserve phase margin.

Angebot Kontakt
TLV2452AIDGKR-Q1 - Dual 220kHz RRIO Op Amp, 23uA | TI
TLV2452AIDGKR-Q1

TLV2452AIDGKR-Q1 - Dual 220kHz RRIO Op Amp, 23uA | TI

The Texas Instruments TLV2452AIDGKR-Q1 is an automotive-grade (AEC-Q100 qualified) dual micropower rail-to-rail input/output operational amplifier consuming only 23 uA per channel while delivering 220 kHz of gain-bandwidth product, supplied in an 8-pin VSSOP (DGK) package. It operates from a single 2.7 V to 6 V supply and is qualified for AEC-Q100 Grade 1 temperature (-40C to +125C). A rail-to-rail input/output operational amplifier is a type of precision op amp within the broader analog amplifier family whose input common-mode range and output voltage swing extend to within millivolts of both supply rails. This maximizes dynamic range in low-voltage, single-supply systems where signal levels approach the rails, a capability conventional op amps cannot provide. Key features include the industry-leading 23 uA/channel quiescent current (far below competitive devices at similar bandwidth), 220 kHz gain-bandwidth product, rail-to-rail input and output (RRIO) operation, and high output drive capability for its power class. The dual-channel integration saves board space and reduces BOM count in multi-channel signal chains. The TLV245x family achieves its performance point through a trimmed CMOS input stage combined with rail-to-rail output buffer architecture, providing stable gain-bandwidth across the full load range. The related TLV245x family also offers shutdown variants (TLV2453/2455) for further average-power reduction in duty-cycled systems. Typical automotive and industrial applications include battery monitoring and current sensing front ends, low-power sensor signal conditioning, portable instrumentation, and microcontroller ADC driver stages, where micropower consumption directly extends battery life and reduces self-heating. Design consideration: because gain-bandwidth is 220 kHz, keep closed-loop gains moderate for signal bandwidths above a few tens of kHz; with 23 uA supply current, output current drive is limited, so avoid heavy capacitive loads without isolation resistors.

Angebot Kontakt
TLV2542ID - 12-Bit 200kSPS Dual SAR ADC | Texas Instruments
TLV2542ID

TLV2542ID - 12-Bit 200kSPS Dual SAR ADC | Texas Instruments

The Texas Instruments TLV2542ID is a 12-bit, 200 kSPS, dual-channel successive-approximation register analog-to-digital converter in an 8-pin SOIC package. It operates from a single 2.7 V to 5.5 V supply and provides serial output that is compatible with SPI and DSP interfaces operating up to 10 MHz. The device combines two analog input channels with a built-in conversion clock, chip select, serial clock, and serial data output for compact embedded measurement systems. An ADC is an analog-to-digital converter, a data-conversion IC that samples a continuously varying voltage and produces a corresponding numeric code. A successive-approximation-register, or SAR, ADC determines each conversion result through a sequence of internal comparisons. SAR ADCs are commonly used where predictable sampling, moderate resolution, low power, and compact serial interfaces are more important than very high conversion throughput. The TLV2542 belongs to the broader ADC data-converter and signal-processing semiconductor hierarchy. The TLV2542ID features 12-bit resolution, 140 kSPS or 200 kSPS maximum throughput options, and specified integral nonlinearity and differential nonlinearity of ±1 LSB maximum. Its signal-to-noise-plus-distortion ratio is specified at 72 dB, while the spurious-free dynamic range is 85 dB. The serial interface supports direct connection to microcontrollers, DSPs, and TMS320-compatible systems up to 10 MHz, reducing the need for external interface logic. The converter uses a single analog supply, with analog input and digital interface functions integrated into a small package. Automatic power-down helps reduce consumption when conversions are not continuously required. The dual-channel architecture is useful for monitoring two independent signals, while the 12-bit code provides approximately 4096 digital levels for each channel. Exact input-range, reference, and absolute-input details must be confirmed in the manufacturer datasheet before final design release. Typical applications include industrial process measurement, battery and power-system monitoring, portable instrumentation, sensor signal acquisition, and embedded DSP or MCU data logging. The serial interface reduces pin count compared with many parallel ADCs, while the dual input count allows one converter to serve two measurements. Designers should account for source impedance, sampling dynamics, reference accuracy, analog grounding, and serial-interface timing. A key implementation consideration is the relationship between analog signal conditioning and ADC accuracy. The front-end should present a low-impedance source, provide suitable filtering for the measurement bandwidth, and keep analog routing away from noisy digital clock and switching signals. This page combines verified product information, distributor availability, application guidance, and replacement constraints for practical engineering review.

Angebot Kontakt
TLV2544QDRG4 - 12-Bit 200kSPS 4-Ch SAR ADC | Texas Instruments
TLV2544QDRG4

TLV2544QDRG4 - 12-Bit 200kSPS 4-Ch SAR ADC | Texas Instruments

The Texas Instruments TLV2544QDRG4 is a 12-bit, 200-kSPS, 4-channel, low-power, serial-output successive-approximation-register (SAR) analog-to-digital converter with AutoPower-Down, supplied in a 16-pin SOIC (D) package. It operates from a single 3 V to 5.5 V analog supply, integrates a built-in reference, conversion clock, and an 8× FIFO, and targets cost- and power-sensitive multi-channel data-acquisition systems. The Q-suffix designates the automotive temperature grade (-40 °C to +125 °C), and the G4 suffix denotes tape-and-reel packaging with Pb-free finish. A SAR ADC is a type of analog-to-digital converter that uses a binary-search algorithm against a precision DAC to resolve each input sample in N clock cycles, where N is the resolution in bits. SAR ADCs offer deterministic latency, no pipeline delay, excellent dynamic performance at moderate sample rates, and very low standby power - features that make them ideal for multiplexed sensor systems, motor-control feedback loops, and instrumentation where every conversion must complete in a known time. The TLV2544QDRG4 inherits all of these SAR traits and adds hardware (CS) and software (S/W) AutoPower-Down control, dropping supply current after each conversion to extend battery life in portable and remote installations. The device digitizes up to four single-ended inputs through an internal analog multiplexer at up to 200 kSPS aggregate throughput, and provides a 4-wire SPI/QSPI/MICROWIRE-compatible serial interface. AutoPower-Down reduces quiescent current to a few microamps between conversions, and differential non-linearity / integral non-linearity errors are specified at ±1.2 LSB maximum up to 125 °C. A signal-to-noise-plus-distortion ratio above the SNR figure cited for the family supports 12-bit effective resolution at the full sampling rate. Architecturally, the TLV2544QDRG4 combines a charge-distribution DAC array, a high-bandwidth input sample-and-hold, an internal 2.5 V reference (or external reference option via REFin), a digital conversion-control state machine, and the AutoPower-Down timing block. The reference and oscillator are fully internal, eliminating external components and shrinking BOM cost in space-constrained systems. Typical applications include automotive sensor interfaces, multi-channel industrial process control, battery-powered portable instrumentation, motor-speed/temperature monitoring, and any multi-channel data logger that needs deterministic low-latency 12-bit conversion. Compared with the TLV2548Q (which is the 8-channel pin-compatible cousin of the same family), the TLV2544QDRG4 trades two analog input channels for a smaller BOM footprint when only four channels are required. During design, keep analog and digital grounds tied to a single star point near the AGND pin, decouple AVDD with a 10 µF tantalum plus 0.1 µF ceramic combination within 5 mm of the pin, and observe the device's 200 kSPS maximum throughput budget when sequencing multi-channel conversions.

Angebot Kontakt
TLV2545IDGKR - 12-Bit 200 kSPS Serial ADC | Texas Instruments
TLV2545IDGKR

TLV2545IDGKR - 12-Bit 200 kSPS Serial ADC | Texas Instruments

The Texas Instruments TLV2545IDGKR is a 12-bit, 200 kSPS successive-approximation analog-to-digital converter with a serial output, housed in an 8-pin VSSOP (DGK) package. Operating from a single 2.7 V to 5.5 V supply, the part features a 1-channel single-ended or pseudo-differential input, integrated conversion clock, autopower-down between conversions, and SPI/DSP-compatible serial interface that supports up to 10 MHz clock rates and TMS320 DSP connections. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that samples a continuous analog voltage and produces a discrete digital code, and a successive-approximation-register (SAR) ADC does so by iteratively comparing the input against an internal DAC, achieving an excellent balance of speed, accuracy, and power consumption for precision low-frequency and audio-bandwidth signals. The TLV2545 belongs to the broader hierarchy of data-converter ICs, which sit within signal-chain and power-management semiconductor families. Key features of the TLV2545 include ±1 LSB maximum INL and DNL, 72 dB SINAD, and 85 dB SFDR at a 20 kHz input tone, along with a 3.5 µs typical conversion time and a flexible SCLK/FS-compatible serial interface. The autopower-down feature reduces current draw to a few microamps between conversions, which is critical for battery-powered and energy-harvesting applications where average load matters more than peak throughput. The architecture uses a charge-redistribution SAR core with an internal sample-and-hold and on-chip oscillator, eliminating the need for an external clock. The pseudo-differential input stage simplifies board layout by accepting ground-referenced signals without a negative rail, while the wide supply range permits direct interface to 3.3 V microcontrollers, 5 V DSPs, or low-voltage battery stacks. Typical applications include portable instrumentation, motor-control feedback loops, battery monitoring, sensor signal conditioning, point-of-load monitoring in industrial control, and audio-bandwidth digitization for consumer audio and telecommunications equipment. The 8-pin VSSOP footprint suits space-constrained designs. When designing with the TLV2545, place 100 nF decoupling close to the supply pin and follow layout practices that keep digital return currents away from the analog input. The SCLK clock rate must remain within the 10 MHz SPI specification, and CS falling-edge timing relative to SCLK should be reviewed against the TMS320 interface diagrams in the datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the same TI VSSOP-8 ADC family, and practical layout notes that go beyond what the manufacturer datasheet alone provides.

Angebot Kontakt
TLV2545IDGKRG4 - 12-Bit 200kSPS Serial ADC, MSOP-8 | Texas Instruments
TLV2545IDGKRG4

TLV2545IDGKRG4 - 12-Bit 200kSPS Serial ADC, MSOP-8 | Texas Instruments

The Texas Instruments TLV2545IDGKRG4 is a 12-bit, 200 kSPS, low-power, serial-interface analog-to-digital converter (ADC) using successive-approximation architecture in an 8-pin MSOP (DGK) PowerPAD package. It operates from a single 2.7 V to 5.5 V analog supply, supports a single pseudo-differential analog input, and includes a built-in conversion clock, an SPI/DSP-compatible serial interface up to 10 MHz, and an Auto-Power-Down mode that reduces current consumption to under 1 µA between conversions. An ADC (analog-to-digital converter) of this type is a precision data converter that quantifies an analog input voltage into a binary code. The TLV2545 belongs to the successive-approximation register (SAR) ADC family — a sub-class of general-purpose, low-latency converters — within the broader data-converter hierarchy of ADC/DAC ICs. SAR ADCs are favored when deterministic latency, simple serial interfacing, and low power dissipation are required, making them a common choice over delta-sigma ADCs for multiplexed or control-loop applications. Key features include ±1 LSB maximum INL and DNL, 72 dB SINAD, 85 dB SFDR at a 20 kHz input, 3.5 µs conversion time, Auto-Power-Down that activates at end-of-conversion, and TMS320-compatible serial output. The DGK MSOP-8 with PowerPAD provides a low thermal-resistance path, enabling reliable operation across the industrial -40 °C to +85 °C temperature range. The TLV2545 uses charge-redistribution SAR architecture with an internal sample-and-hold and a precision DAC. The integrated Auto-Power-Down dynamically reduces consumption to sub-microamp levels between conversions, allowing the part to serve battery-powered, event-driven, or polled systems without the overhead of an external analog switch. Typical applications include portable instrumentation and battery-powered sensors, industrial process control loops, multi-channel data-acquisition front-ends, digital signal processor (DSP) and microcontroller analog front ends, optical-networking monitoring, and touch-screen or panel-metering subsystems. When designing with this ADC, place the 1.5 nF CS capacitor and 10 µF bypass capacitor close to the supply pins, route the analog and digital grounds in a star or split-plane topology, and ensure the reference decoupling (REF decoupling capacitor) is short and noise-free. The internal oscillator and Auto-Power-Down mean no external clock is required for stand-alone operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB-layout design notes that go beyond the manufacturer datasheet.

Angebot Kontakt
TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments
TLV271CD

TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments

The Texas Instruments TLV271CD is a single, 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 µA supply current per channel, and an 8-pin SOIC package. Its specified supply range is 2.7 V to 16 V, while its 3 MHz gain-bandwidth product and 2.4 V/µs slew rate support responsive signal conditioning. Designed as a low-power alternative to the TLC27x family, it suits systems that require output swing close to the supply rails without a higher-bandwidth amplifier. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain makes closed-loop amplification practical when negative feedback defines the gain and bandwidth. The TLV271 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. Its rail-to-rail output stage lets the output approach either supply rail under suitable load conditions, improving usable swing in low-voltage systems. The CMOS implementation also supports low power consumption, although total supply current depends on supply voltage, output activity, and load. The TLV27x family combines a 3 MHz bandwidth with 550 µA of supply current per channel and a 2.4 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, the devices operate from 2.7 V to 16 V over an extended industrial temperature range of -40 °C to +125 °C. The verified search data identifies the TLV271CD as the commercial-grade 8-SOIC ordering variant. Its low quiescent current is valuable in battery-powered instrumentation, while its 3 MHz bandwidth is more useful than a micropower unity-gain-stable amplifier when moderate closed-loop bandwidth is required. The amplifier's architecture is suitable for voltage buffers, current-sensing interfaces, sensor amplification, and general-purpose analog filtering. Rail-to-rail output operation is especially relevant when the signal must use much of the available supply range. Designers should still check input common-mode range, output load, capacitive-load stability, and noise specifications in the manufacturer datasheet rather than assuming that rail-to-rail output also means rail-to-rail input. Stable feedback ratios and conservative capacitive loading help prevent oscillation. Typical uses include portable measurement systems, industrial sensor interfaces, low-voltage audio or communication blocks, active filters, and embedded control. The 3 MHz bandwidth allows higher closed-loop bandwidth than very-low-frequency precision amplifiers, while the 550 µA-per-channel current keeps demand modest. At low supply voltages, usable swing and input range become important design limits; at high frequencies, board parasitics and probe loading can materially alter observed performance. For implementation, bypass each supply pin with local decoupling and route feedback traces away from input and output nodes. Avoid placing large capacitive loads directly at the output unless the datasheet stability limits are checked. The main engineering trade-off is the combination of low power, moderate 3 MHz bandwidth, and single-supply rail-to-rail output: TLV271CD is not automatically interchangeable with op amps having different input architecture, noise, or compensation. This page consolidates the verified manufacturer specifications, distributor availability links, practical design notes, and explicitly qualified alternatives for engineers evaluating the TLV271CD in analog signal-chain designs.

Angebot Kontakt
TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments
TLV271ID

TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments

Texas Instruments TLV271ID is a single 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 uA/channel supply current, and a 2.4 V/us slew rate, housed in an 8-pin SOIC package. Its operating supply range is 2.7 V to 16 V, and its extended industrial temperature range is -40 C to +125 C. An operational amplifier is an analog signal-conditioning semiconductor that uses high open-loop gain to amplify voltage differences in feedback-based circuits. The TLV271 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning hierarchy. Its rail-to-rail output enables the output stage to approach the supply rails more closely than a conventional output stage, while CMOS construction supports low power consumption and operation from low single-supply voltages. The TLV271 combines 3 MHz gain-bandwidth product with 2.4 V/us slew rate and 550 uA/channel supply current. Its input noise voltage is 550 nV/Hz, and the verified product data identifies a 39 nV/Hz input-bias-current figure. The device is intended for low-power, wide-bandwidth signal paths operating across a 2.7 V to 16 V supply range. The TLV27x family provides rail-to-rail output swing and a minimum operating supply voltage of 2.7 V. This architecture is useful in portable instrumentation, sensor interfaces, buffer stages, and general-purpose analog signal conditioning where a low-noise, low-power amplifier is preferred. The TLV271ID uses the D suffix package configuration identified in the verified distributor data as an 8-pin SOIC. Typical applications include portable measurement, low-side current sensing, sensor buffers, audio and communication interfaces, and industrial control modules. In a current-sense amplifier, the op amp amplifies the small voltage generated across a shunt resistor; its 3 MHz bandwidth and rail-to-rail output support useful signal range. In a sensor buffer, low supply current helps preserve limited power budgets. When designing around the TLV271ID, verify input common-mode behavior, output swing, load requirements, and stability for the selected feedback network. Decoupling capacitors should be placed close to the supply pins, and the PCB should minimize loop area to reduce supply-noise coupling. The TLV271 family is identified by Texas Instruments as an active product family, with final orderable-grade and lifecycle status checked against current manufacturer data. This page combines verified manufacturer and distributor information with a focused selection guide, application context, design notes, and qualified replacement discussion. It is intended to help engineers identify whether the TLV271ID fits a 2.7 V-to-16 V, low-power, rail-to-rail-output analog design.

Angebot Kontakt
TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments
TLV271IP

TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV271IP is a single operational amplifier designed for low-power signal-conditioning systems, with a 16 V maximum supply voltage, 3 MHz gain-bandwidth product, and 550 µA per-channel supply current. Its rail-to-rail output capability allows the output to approach both supply rails, making it suitable for instrumentation, buffering, and low-voltage analog systems. The device is supplied in an 8-pin PDIP package. An operational amplifier is a voltage-controlled voltage-source device used to amplify the difference between two input voltages. In a practical signal chain, it can provide gain, impedance buffering, filtering, level shifting, or active feedback control. The TLV271 family is positioned as a low-power, general-purpose amplifier family for applications that require more bandwidth than very-low-power micropower parts while keeping supply current modest. The TLV271IP provides one amplifier per package. The verified manufacturer and distributor information identifies a 3 MHz bandwidth, 2.4 V/µs typical slew rate, 2.4 V minimum supply voltage, 16 V maximum supply voltage, 550 µA typical supply current, and input noise voltage of 39 nV/√Hz. The amplifier has rail-to-rail output operation, while the supplied data identifies a 39 nV/√Hz input noise voltage and an input bias current specification reaching 1 pA. These characteristics make it appropriate for sensor interfaces, analog measurement chains, buffering, and low-power embedded systems. Typical circuit use places the TLV271IP in non-inverting or inverting amplifier configurations, voltage followers, transimpedance front ends, and active filters. Because the output is rail-to-rail, the device can maximize usable signal range in low-voltage systems, although the exact output swing depends on load current and supply voltage. Its 3 MHz bandwidth enables higher-frequency signal paths than a slow precision amplifier, while the 550 µA supply current helps control power use in battery-powered or space-constrained equipment. The principal design consideration is supply and signal-headroom planning. The input common-mode range, output swing, load capability, noise performance, and stability requirements should be checked against the manufacturer datasheet for the selected supply and temperature conditions. Decoupling capacitors should be placed close to the power pins, and unused input pins must be handled according to the datasheet recommendations. The provided web data identifies the device as a CMOS amplifier in an 8-PDIP package, but detailed electrical limits and complete pin functions are not included in the supplied records. This product data combines the verified Texas Instruments and distributor listings, identifies the TLV271IP as a 16 V, 3 MHz, rail-to-rail-output single op amp, and separates documented specifications from parameters that require confirmation in the full manufacturer datasheet. It also records commercially relevant package and application information for engineers comparing low-power operational amplifiers. The TLV271IP is positioned for instrumentation, buffer, and general-purpose analog designs where a single amplifier, low-power operation, and rail-to-rail output are useful. It can serve as a building block in sensor signal conditioning, portable measurement equipment, industrial control interfaces, and embedded analog signal paths.

Angebot Kontakt
TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments
TLV272CD

TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV272CD is a dual, general-purpose operational amplifier with a 16 V maximum supply, 3 MHz gain-bandwidth product, 2.4 V/us slew rate, and rail-to-rail output in an 8-SOIC package. Each channel is designed for low-power signal conditioning while maintaining useful bandwidth for general-purpose analog systems. An operational amplifier is a high-gain analog building block used to amplify, buffer, compare, or integrate signals. The TLV272 belongs to the voltage-feedback operational-amplifier hierarchy and combines a wide supply range, low channel current, and rail-to-rail output capability. Rail-to-rail output allows the output to approach the positive or negative supply limit more closely than a conventional output stage, improving dynamic range in low-voltage systems. Verified device characteristics include 550 uA per channel, 3 MHz bandwidth, 2.4 V/us slew rate, 2.7 V to 16 V operating supply range, 39 nV/Hz input-noise density, and input bias current specified as low as 1 pA. The family is positioned for portable instrumentation, sensor interfaces, audio paths, and general signal conditioning where dual-channel operation reduces package count. The wide supply range supports both conventional 5 V analog systems and higher-voltage rails, while the 3 MHz bandwidth supports signals beyond audio-band precision-only applications. The 2.4 V/us slew rate helps preserve large-signal response, although the exact output amplitude, load, and frequency must be checked against the manufacturer datasheet before final sizing. Typical uses include low-power sensor interfaces, buffered analog measurements, audio voltage buffers, active filtering, and general dual-channel conditioning. The SOIC-8 package is suitable for conventional surface-mount PCB assembly, but pin numbering and electrical limits must be verified against the exact TLV272 datasheet. A key design consideration is that low power and moderate bandwidth do not eliminate the need for stable reference and feedback networks. Place bypass capacitors near the supply pins, use short feedback paths, and verify common-mode, output-swing, noise, and stability requirements against the application. This page consolidates verified manufacturer and distributor information with design-oriented guidance; unsupported details remain explicitly marked for review.

Angebot Kontakt
TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments
TLV272ID

TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272ID is a dual, 16 V, 3 MHz rail-to-rail output operational amplifier packaged in an 8-pin SOIC. It uses approximately 550 uA per channel and is specified for operation from 2.7 V to 16 V over a -40 C to +125 C temperature range. These headline values position it as a compact, low-power amplifier for general-purpose analog signal conditioning. An operational amplifier is an active analog component that amplifies the voltage difference between its differential inputs while using negative feedback to set closed-loop gain, filtering, or integration behavior. Within the hierarchy of integrated circuits, the TLV272 belongs to the operational-amplifier class, then to voltage-feedback amplifiers, analog ICs, and ultimately semiconductor signal-conditioning devices. Rail-to-rail output allows the output voltage to approach the supply limits at its rated operating conditions. Key verified characteristics include a 3 MHz gain-bandwidth product, dual-amplifier configuration, 550 uA supply current per channel, 16 V maximum supply rating, and rail-to-rail output operation. The 3 MHz bandwidth supports higher-frequency signal paths than very-low-bandwidth micropower amplifiers, while the 550 uA per-channel current supports battery-conscious designs. The -40 C to +125 C grade is suitable for industrial temperature requirements when the complete circuit is qualified for those conditions. The TLV272ID combines two independent amplifiers in one SOIC-8, reducing board area compared with two separate single-channel packages. Its operating characteristics are relevant for sensor interfaces, audio paths, filtering, and general voltage amplification. However, the provided web data does not specify input offset voltage, input bias current, noise density, output-current capability, or input common-mode range, so these values must be confirmed in the manufacturer datasheet before precision design. Typical uses include low-frequency audio amplification, buffered sensor outputs, active filters, and portable measurement circuits. When operating from a 2.7 V supply, engineers must confirm that output swing, input range, and load requirements remain acceptable at the selected signal amplitudes. The 16 V maximum rating does not by itself establish safe operation at every intermediate rail or temperature combination. The main PCB consideration is decoupling. Place input and output-conditioning components close to their associated pins, route feedback loops compactly, and provide stable supply bypassing. Stable operation also depends on the required common-mode and output ranges, load impedance, feedback topology, and output-current demand. This page combines verified manufacturer and distributor information with explicit data gaps, practical application guidance, and conservative sourcing. It is intended to speed engineering evaluation while avoiding unsupported claims about parameters not present in the retrieved records.

Angebot Kontakt
TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments
TLV272IP

TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272IP is a dual, 16 V, 3 MHz operational amplifier with rail-to-rail output swing, supplied in an 8-pin PDIP package. It provides two amplifier channels, a 2.4 V/us slew rate, 550 uA/channel supply current and a 2.7 V to 16 V total supply range. The device is intended for low-power, wide-bandwidth signal conditioning where rail-to-rail output capability improves usable output range. An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify voltage signals. The TLV272IP belongs to the operational-amplifier hierarchy and is appropriate for sensor interfaces, buffer stages, filters, audio paths and general-purpose analog signal chains. Its rail-to-rail output is useful when the amplifier must approach the positive or negative supply rail while retaining a defined output voltage. The main performance features are 3 MHz gain-bandwidth product, 2.4 V/us slew rate, 550 uA/channel supply current and 39 nV/Hz input noise voltage. The verified family information also specifies operation from 2.7 V to 16 V, with commercial and extended-temperature options in the broader TLV27x family. Because the TLV272IP is a dual device, one package can support two independent analog channels. The PDIP package is through-hole and therefore useful for prototypes, educational designs, repair assemblies and applications where leaded parts are preferred over surface-mount packages. Its 8-pin arrangement matches the dual-op-amp pinout convention, but the exact pin names and electrical limits must be confirmed against the manufacturer datasheet before final PCB release. The verified sources identify the TLV272IP as a dual rail-to-rail-output operational amplifier in an 8-PDIP package. Typical uses include low-voltage sensor buffering, portable instrumentation, audio preamplification, active filtering and industrial control signal conditioning. The 3 MHz bandwidth provides more signal bandwidth than a strictly low-frequency precision amplifier, while the 550 uA/channel current supports battery-conscious designs. The tradeoff is that the PDIP footprint is larger and less compact than an equivalent surface-mount package. For PCB design, place input and output components close to the relevant pins and maintain a common ground reference. Decoupling capacitors should be placed at the power pins to control supply impedance and high-frequency noise. Confirm stability, input common-mode range, output-load limits and supply current in the final circuit rather than relying only on the headline bandwidth and slew-rate figures. This product record combines verified manufacturer and distributor information with explicitly marked data gaps, practical application guidance and sourcing-oriented search terms. It is intended to help engineers identify the correct package, assess whether TLV272IP fits a signal-chain requirement and locate the manufacturer datasheet before committing to a design.

Angebot Kontakt
TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI
TLV274CD

TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI

The Texas Instruments TLV274CD is a quad, 16 V, 3 MHz operational amplifier with rail-to-rail output capability, housed in a 14-pin SOIC package. The verified product data identifies a 550 µA-per-channel supply current, 2.4 V/µs slew rate, 2.7 V to 16 V supply operation, and a commercial temperature range identified by the CD ordering code. It is designed for general-purpose analog signal conditioning where low power, moderate bandwidth, and rail-to-rail output are useful. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify voltage differences between its input terminals. The TLV274 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy. Its four amplifiers in one package make it suitable for multi-channel systems, while rail-to-rail output helps the output approach the supply rails and improves dynamic range in low-voltage designs. The verified data lists 3 MHz bandwidth, 2.4 V/µs slew rate, 16 V maximum supply voltage, 550 µA per channel, and 550 µA/channel input-noise-related information. The wide supply range supports portable, industrial, test, and measurement systems. The low power per channel is useful when four amplifiers must operate continuously, while the 3 MHz bandwidth is more appropriate for general-purpose signal paths than precision low-frequency instrumentation alone. The TLV274CD uses a 14-pin SOIC package and is offered through distributors including DigiKey, Mouser, LCSC, and Octopart. The verified DigiKey result identifies it as a standard general-purpose amplifier with four circuits and rail-to-rail output. Because the available data does not provide complete pin names, exact electrical limits, or validated drop-in alternatives, those details are marked as needed rather than guessed. Typical uses include low-frequency sensor interfaces, buffered analog measurement chains, current or voltage signal conditioning, audio preamplifier stages, and general embedded control systems. Keep the input common-mode range, output swing, load, supply voltage, and stability requirements within the manufacturer datasheet limits, and account for input bias current, noise, and capacitive loading. For PCB design, place the bypass capacitor close to the supply pins and keep analog input and output routing short. Avoid excessive capacitive loading at the output and verify stability with the selected feedback network. This page combines verified manufacturer and distributor information with practical design guidance; confirm final electrical and mechanical details against the official TI datasheet before release.

Angebot Kontakt
TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments
TLV274ID

TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV274ID is a quad, general-purpose operational amplifier with 16 V supply capability, 3 MHz gain-bandwidth product, and rail-to-rail output operation in a 14-SOIC package. Each of its four channels draws 550 uA nominal supply current and supports a 2.4 V to 16 V supply range, making the device suitable for compact, low-power analog signal chains. An operational amplifier is an active analog component that uses high open-loop gain to amplify the difference between two input voltages. The TLV274 belongs to the operational-amplifier hierarchy and combines rail-to-rail output swing with a relatively high 3 MHz bandwidth. That balance is useful for signal conditioning, filtering, buffering, and general instrumentation where low supply current and usable high-frequency response matter. Key characteristics include four independent amplifiers in one package, rail-to-rail output, 3 MHz bandwidth, 2.4 V/us slew rate, and 550 uA/channel supply current. The reported input-voltage noise density is 39 nV/sqrt(Hz), while input bias current reaches as low as 1 pA in the characterized operating range. These values support low-level signal work, although input offset voltage, input common-mode range, and output-current limits were not supplied in the verified data. The TLV274ID is based on a rail-to-rail-output amplifier architecture rather than a rail-to-rail-input design. Designers must therefore verify that input signals remain inside the allowed common-mode region. Its 3 MHz bandwidth enables moderate-frequency feedback networks and sensing loops, but stability should be checked against output loading, capacitance, noise gain, and filter topology. Typical uses include low-power sensor conditioning, audio and communication interfaces, current measurement, data acquisition, filtering, and embedded analog control. Placing four amplifiers in one SOIC can reduce package count, but adjacent channels may share supply and thermal conditions. Decoupling and grounding therefore remain important when driving successive signals. Begin each supply rail with suitable local bypass capacitance and route high-current return paths away from sensitive analog inputs. Because the exact compensation recommendations and electrical limits are unavailable in the supplied source set, use the manufacturer datasheet for final gain, load, stability, and layout validation. This page combines verified product facts, application guidance, procurement context, and a conservative comparison of documented family variants. Its added value is an engineering-focused explanation of where the TLV274ID fits without treating unavailable electrical limits as assumptions.

Angebot Kontakt
TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments
TLV274IN

TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV274IN is a four-circuit, general-purpose operational amplifier with a 3 MHz gain-bandwidth product, 2.4 V to 16 V supply-voltage range, and rail-to-rail output operation. It is packaged in a 14-pin PDIP and is intended for low-power signal conditioning across industrial, instrumentation, and embedded systems. The verified source data identifies 550 µA of supply current per channel, 2.4 V/µs slew rate, 39 nV/Hz input-noise voltage density, and specified operation from 0°C to 70°C. An operational amplifier is an analog building block that uses high open-loop gain to amplify the difference between two input voltages. Within the signal-chain hierarchy, the TLV274IN belongs to the operational-amplifier, analog-amplifier, and semiconductor categories. Rail-to-rail output capability allows the output to approach the positive or negative supply rail under suitable load conditions, while the wide supply range supports single-supply and dual-supply systems. Key features include four amplifiers in one package, a 3 MHz bandwidth, 2.4 V/µs slew rate, 550 µA per-channel supply current, 39 nV/Hz input-voltage-noise density, and 1 pA input-bias current over the specified temperature range. The low-power bias current is useful when preserving sensor signals and reducing loading, while the 3 MHz bandwidth supports higher-frequency signal paths and active filtering. The TLV274IN is based on a voltage-feedback amplifier architecture, as identified in the verified comparison data. In a typical application, one channel is used for amplification, another for buffering, and the remaining channels for filtering or instrumentation. Its rail-to-rail output supports low-voltage systems where the signal must use much of the available supply range. Typical applications include sensor-interface circuits, data-acquisition signal chains, low-frequency filters, buffered analog controls, portable instrumentation, and embedded measurement systems. The 16 V maximum supply makes it suitable for systems operating below industrial transient voltages, provided the design does not exceed the device rating. When laying out a TLV274IN board, keep the unused amplifier inputs biased to a valid common-mode level and place input and feedback components close to the relevant pins. Check the required output swing, load, stability, and supply-bypass requirements against the manufacturer datasheet before committing the design.

Angebot Kontakt
TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI
TLV2888IDGKR

TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI

The Texas Instruments TLV2888IDGKR is a dual, zero-drift, CMOS precision operational amplifier designed for 36V systems and mux-friendly analog front ends. It combines a 14MHz gain-bandwidth product with a 40V/us slew rate and low 7.5nV/sqrtHz noise, making it one of the fastest zero-drift op amps available in an 8-VSSOP (DGK) package. The I-grade supports the -40C to +125C industrial temperature range, and the DGKR suffix indicates tape-and-reel packaging. A zero-drift operational amplifier uses auto-zero or chopper techniques to continuously cancel input offset voltage and thermal drift. In the system hierarchy: zero-drift op amp -> precision operational amplifier -> operational amplifier -> amplifier IC -> analog semiconductor. The TLV2888 belongs to the TLVx888 family (TLV888 single, TLV2888 dual, TLV4888 quad), optimized for applications needing both low DC error and wide signal bandwidth. Key features from the TI datasheet (TLVx888, Rev. B) include 3uV typical offset voltage, 0.01uV/C typical drift, and 150dB PSRR and 150dB CMRR. The input common-mode range extends to the negative rail and the output swings rail-to-rail, maximizing dynamic range on single supplies up to 36V. The mux-friendly input architecture minimizes charge-injection transients when inputs are switched, which is critical for multiplexed data-acquisition front ends feeding SAR or delta-sigma ADCs. The 14MHz bandwidth and 40V/us slew rate support fast sampled signals while preserving near-zero DC offset - a combination that distinguishes the TLV2888 from slower zero-drift amplifiers such as the OPA2187. Typical applications include multiplexed industrial data acquisition, high-precision sensor conditioning, motor-control current sensing, and servo or valve control loops where a 36V rail is available. Low offset and drift allow direct connection to precision ADCs like the ADS1220 without a separate auto-zero stage, and 150dB CMRR preserves accuracy across high common-mode voltages. Design tip: keep feedback resistors low enough to limit Johnson noise, decouple the supply pins close to the VSSOP-8 package, and avoid large capacitive loads on the output unless datasheet stability criteria are followed, or chopper ripple may increase. Pricing shown is indicative as of 2026-08-30.

Angebot Kontakt
TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI
TLV2888IDGKR-Q1

TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI

The Texas Instruments TLV2888IDGKR-Q1 is an automotive-qualified, dual-channel, zero-drift (chopper-stabilized) CMOS precision operational amplifier rated for 36V operation with a 14MHz gain bandwidth product, supplied in an 8-pin VSSOP (DGK) package. It belongs to the TLVx888 family (TLV888, TLV2888, TLV4888) of wide-bandwidth, low-noise, mux-friendly op amps. A zero-drift operational amplifier is a precision amplifier architecture that periodically self-corrects its input offset voltage using chopper stabilization or auto-zero techniques. Within the amplifier hierarchy, it sits under operational amplifiers, precision amplifiers, and analog signal-conditioning ICs, delivering DC accuracy that conventional CMOS or bipolar op amps cannot achieve without trimming. Key features include a maximum input offset voltage of only 15uV, a maximum offset drift of 0.05uV/C over the wide temperature range, rail-to-rail I/O operation, and a very high slew rate with fast settling time enabled by the wide 14MHz bandwidth. The mux-friendly input design minimizes channel-switching glitches when the amplifier follows an analog multiplexer, a common requirement in automotive battery-management and sensor-multiplexed front ends. Architecturally, the TLV2888 uses a zero-drift CMOS core that suppresses 1/f noise and offset through internal auto-correction, combining the DC precision of chopper amplifiers with the wide AC bandwidth of a fast CMOS output stage. This makes it effective both as a precision DC amplifier and as a high-speed signal-chain buffer. Typical applications include automotive battery management systems, current-sense amplification after a shunt (pair with INA-family monitors), multiplexed sensor front ends driving ADCs, and industrial precision signal conditioning. The 36V rating tolerates automotive load-dump-adjacent rail conditions. Design consideration: zero-drift amplifiers generate internal chopping ripple; follow the TI datasheet layout recommendations and verify settle time when driving switched-capacitor ADC inputs. Price references are as of 2026-08-29.

Angebot Kontakt
TLV3011AIDCKR - 5µA Open-Drain Comparator w/ 1.24V Ref | SC70-6 | TI
TLV3011AIDCKR

TLV3011AIDCKR - 5µA Open-Drain Comparator w/ 1.24V Ref | SC70-6 | TI

The Texas Instruments TLV3011AIDCKR is a micropower comparator with an integrated 1.242 V series voltage reference, packaged in a 6-pin SC-70 (DCK) footprint. It is an open-drain output variant of the TLV3011 family with a maximum quiescent current of 5 µA, input common-mode range that extends 200 mV beyond both supply rails, and single-supply operation from 1.8 V to 5.5 V. The on-chip voltage reference exhibits low 100 ppm/°C drift over temperature, making the part suitable for battery-monitoring and threshold-detection circuits where a stable reference is required without an external Zener or shunt. A comparator is an analog building block that compares two input voltages and produces a digital logic output indicating which one is larger. The TLV3011 family belongs to the open-drain comparator hierarchy, where the output transistor only sinks current and requires an external pull-up resistor to the desired logic rail. This contrasts with push-pull comparators like the TLV3012, which actively drive both high and low. Open-drain comparators are preferred when level-shifting is needed between logic domains, when wired-OR logic combining multiple comparator outputs is desired, or when the output must swing above VCC. Key features include 5 µA maximum quiescent current, 1.242 V reference with 100 ppm/°C drift, internal hysteresis for clean switching, and propagation delay in the microsecond range suitable for low-speed monitoring. The SC-70-6 package measures approximately 2.0 x 1.25 mm, allowing placement in space-constrained wearables, IoT sensor nodes, and portable battery-management boards. The wide input common-mode range (rail-to-rail minus 200 mV margin) supports monitoring of signals at or near the supply rails, which simplifies battery-voltage detection in single-cell Li-ion systems down to 3.0 V cut-off. Typical applications include battery voltage monitoring, window comparators for over-voltage/under-voltage detection, threshold detectors in portable medical devices, industrial sensor alarms, and simple relaxation oscillators. The internal reference enables a single-chip solution for generating a fixed threshold without adding external shunt regulators. When designing with this part, choose the external pull-up resistor on OUT to match the desired logic-rail rise time and current; 100 kΩ to 1 MΩ values are typical. Ensure the reference output capacitor (if used at REF pin) is sized to filter reference noise without slowing response. The open-drain output allows combining multiple TLV3011 outputs for wired-OR fault signalling in redundant-supply monitor circuits. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
TLV316QDBVRQ1 - 10MHz RRIO Op Amp, AEC-Q100, SOT-23-5 | TI
TLV316QDBVRQ1

TLV316QDBVRQ1 - 10MHz RRIO Op Amp, AEC-Q100, SOT-23-5 | TI

The Texas Instruments TLV316QDBVRQ1 is an automotive-grade, single-channel, 10-MHz, rail-to-rail input/output (RRIO) CMOS operational amplifier in a 5-pin SOT-23 (DBV) package. It operates from 1.8 V to 5.5 V single supply, delivers 10 MHz gain-bandwidth product, 400 µA/channel quiescent current, and 12 nV/√Hz input voltage noise density at 1 kHz, making it a strong general-purpose low-voltage op amp for cost-sensitive signal chains. An operational amplifier (op amp) is a high-gain DC-coupled differential amplifier that uses external feedback to set its closed-loop behavior - gain, bandwidth, input impedance, and output impedance. Op amps form the fundamental building blocks of analog signal conditioning: inverting/non-inverting amplifiers, active filters, integrators, comparators, transimpedance amplifiers, and current/voltage buffers. Within the broader signal-chain taxonomy, general-purpose CMOS op amps sit between low-power chopper/zero-drink amplifiers and high-speed current-feedback op amps, optimized for portable, battery-powered, and automotive sensor-interface applications. Key features of the TLV316QDBVRQ1 include rail-to-rail input common-mode range that includes both supply rails, rail-to-rail output swing within tens of millivolts of either rail, 1.8 V minimum supply enabling direct Li-ion/cell operation, 400 µA typical quiescent current per channel, and 12 nV/√Hz voltage noise density at 1 kHz. AEC-Q100 Grade 1 qualification (-40 °C to +125 °C ambient), HBM ESD Class 3A, and CDM ESD Class C5 ratings make it suitable for under-hood and cabin automotive modules. Internally the device uses a CMOS input stage that supports true rail-to-rail common-mode operation without the crossover-distortion artifacts of legacy bipolar RRIO parts. The 10-MHz gain-bandwidth product combined with 6 V/µs typical slew rate provides sufficient speed for moderate-bandwidth sensor conditioning, audio pre-amplification, and active filter stages at audio frequencies. Typical applications include automotive sensor signal conditioning (current-shunt monitors, thermistor bridges, pressure/temperature transducers), body and chassis ECUs, infotainment audio pre-amplifiers, low-side/battery current sensing, and portable/mobile precision buffers. The wide supply range also supports industrial 3.3 V and 5 V PLC analog input modules. When designing with this op amp, place a 0.1 µF decoupling capacitor within a few millimeters of the supply pin, use a feedback network that keeps total gain above the minimum stable gain of 1 V/V (unity), and observe the input common-mode range - although RRIO, the input stage shifts distortion performance near the rails, so biasing the input mid-supply preserves linearity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes that go beyond the manufacturer datasheet to accelerate automotive and industrial analog front-end design decisions.

Angebot Kontakt
TLV3201AIDCKR - 40ns microPOWER Comparator, SC-70-5 | Texas Instruments
TLV3201AIDCKR

TLV3201AIDCKR - 40ns microPOWER Comparator, SC-70-5 | Texas Instruments

The Texas Instruments TLV3201AIDCKR is a single-channel, 40 ns microPOWER push-pull comparator in a 5-pin SC-70 (DCK) package, drawing only 40 µA of quiescent current. It features rail-to-rail input common-mode range, 1 mV typical input offset voltage, and a wide 2.7 V to 5.5 V single-supply operating range. The push-pull CMOS output stage delivers large output drive current without requiring an external pull-up resistor. A comparator is an analog circuit building block that compares two input voltages and forces its output to one of two logic states based on which input is larger. The TLV3201 belongs to the high-speed, low-power comparator sub-category of analog comparators, which sits within amplifiers/comparators -> analog ICs -> signal conditioning -> power management. This combination of 40 ns propagation delay and 40 µA supply current places the part at the high-speed / low-power boundary, making it attractive for battery-powered systems that also need fast overvoltage detection or threshold-crossing response. Key features include 40 ns propagation delay (typical), 40 µA quiescent current, rail-to-rail input common-mode range that can swing 200 mV below the negative rail, push-pull CMOS output capable of driving typical CMOS or TTL loads directly, internal hysteresis for clean switching in noisy environments, and an industrial -40 °C to +125 °C operating temperature range. The small SC-70-5 (2.0 × 2.1 mm) footprint enables compact designs for space-constrained applications. The TLV3201 is built on a CMOS process with a precision input stage that achieves 1 mV input offset while maintaining microamp quiescent current. The push-pull output eliminates the static current draw of an open-drain pull-up resistor, improving efficiency in battery-powered systems. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V rails commonly used in industrial and consumer designs. Typical applications include battery management threshold detection, zero-crossing detectors for line-powered systems, oscillator circuits, window comparators, IR receiver signal conditioning, and general-purpose analog monitoring. The part is particularly well suited for portable and handheld equipment where the 40 µA supply current extends battery life while the 40 ns speed supports fast fault response. When designing with this comparator, account for input source impedance and bias current to limit offset-induced errors. For high-speed switching above 100 kHz, add local supply decoupling (0.1 µF ceramic in parallel with 1 µF bulk) within 5 mm of the VCC pin. The internal 6 mV hysteresis is sufficient for most noisy environments, but for very slow-moving inputs add external positive feedback to widen the hysteresis band. This page synthesizes distributor pricing, drop-in alternatives in the same SC-70-5 footprint, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
TLV3202AQDGKRQ1 - 40ns Dual Automotive Comparator | TI
TLV3202AQDGKRQ1

TLV3202AQDGKRQ1 - 40ns Dual Automotive Comparator | TI

The Texas Instruments TLV3202AQDGKRQ1 is a dual, high-speed, low-power automotive comparator with 40 ns propagation delay, a 40 µA per-channel quiescent current, and rail-to-rail inputs in an 8-VSSOP DGK package. It operates from a single 2.7 V to 5.5 V supply and supports an ambient operating-temperature range of -40 °C to 125 °C. The device is designed for fast threshold decisions where response time, low power, and compact placement matter. A comparator is a differential signal integrated circuit that compares two input voltages and switches its logic output according to their relationship. In the broader semiconductor hierarchy, this dual analog comparator belongs to the comparator, interface IC, and signal-conditioning categories. The TLV3202-Q1 family combines rail-to-rail input capability, 1 mV offset voltage, push-pull outputs, and large output-drive capability, making it useful for signal conditioning, threshold detection, and system monitoring. The most important verified features are 40 ns high-speed response, 40 µA low-power operation, rail-to-rail input, 1 mV offset voltage, and large output drive current. Its two channels share one package, reducing board area for paired decisions. The push-pull output can drive downstream digital logic directly, while the low-power operating current helps preserve system power budget in continuously monitoring designs. The automotive-oriented Q1 designation also makes the device appropriate for temperature-qualified vehicle systems when its specified operating range and qualification requirements are satisfied. The TLV3202AQDGKRQ1 is supplied in an 8-VSSOP DGK surface-mount package. Its compact footprint is suitable for dense industrial, automotive, communications, and embedded-control designs. The package and pin configuration must be compared directly against the original PCB footprint before substitution; a similar comparator function alone does not guarantee drop-in compatibility. The manufacturer product page identifies the device as a dual comparator with eight pins and a -40 °C to 125 °C temperature range. Typical applications include automotive battery and signal monitoring, industrial threshold detection, sensor conditioning, overvoltage and undervoltage indication, waveform edge detection, and general-purpose digital decision logic. The fast 40 ns response helps minimize uncertainty when a signal crosses the comparator threshold, while the low-power characteristic is advantageous in battery-powered or continuously active systems. Designers should verify input common-mode limits, output logic levels, supply decoupling, and unused-channel handling against the manufacturer datasheet. Place the device near the sensed signal where practical, maintain a stable reference node, and route high-current or switching nodes away from comparator inputs. This page combines the verified manufacturer and distributor information with engineering guidance, application context, and a conservative replacement assessment.

Angebot Kontakt
TLV320AC37CN - 3V Voice-Band Audio Processor | Texas Instruments
TLV320AC37CN

TLV320AC37CN - 3V Voice-Band Audio Processor | Texas Instruments

The TLV320AC37CN is a voice-band audio processor (VBAP) from Texas Instruments, designed for single 3-V operation with low power consumption. It integrates a combined A/D, D/A converter and filters, supporting sample rates up to 16 kHz and a pass-band to 7.2 kHz. The device is housed in a 20-pin PDIP package, making it suitable for through-hole assembly in telecommunication and audio applications. A voice-band audio processor (VBAP) is a specialized mixed-signal IC that combines analog-to-digital and digital-to-analog conversion with filtering and signal processing optimized for the 300 Hz to 3.4 kHz voice band. It sits within the broader category of audio codecs, which are essential in telephony, intercoms, and voice-controlled systems. The TLV320AC37CN specifically targets low-power, battery-operated voice applications, offering a complete analog front-end and codec in a single package. Key features include a low operating power of 20 mW typical, standby mode at 5 mW, and power-down mode at 2 mW. The device supports extended variable-frequency operation with sample rates up to 16 kHz and a pass-band to 7.2 kHz. It includes an electret microphone interface, making it ideal for direct connection to electret condenser microphones. The combined A/D, D/A, and filters simplify system design by reducing external components. Technically, the TLV320AC37CN employs a CMOS process and operates from a single 3-V supply, which is critical for portable and battery-powered equipment. The device features a PCM codec interface with A-law companding, suitable for digital telephony standards. The through-hole PDIP-20 package ensures easy prototyping and manual assembly, though it limits high-density applications compared to surface-mount alternatives. Typical applications include digital telephone answering machines, speakerphones, intercom systems, and voice recorders. The low power consumption and 3-V operation make it particularly suited for battery-powered devices where efficiency is paramount. The integrated filters and codec reduce BOM cost and board space. When designing with this device, ensure proper decoupling of the 3-V supply and careful layout of the analog and digital sections to minimize noise coupling. The device is now obsolete, so consider pin-compatible alternatives for new designs.

Angebot Kontakt
TLV320AIC3105IRHBR - Low-Power Stereo Audio CODEC | Texas Instruments
TLV320AIC3105IRHBR

TLV320AIC3105IRHBR - Low-Power Stereo Audio CODEC | Texas Instruments

The Texas Instruments TLV320AIC3105IRHBR is a low-power stereo audio CODEC with 6 single-ended inputs, 6 outputs, an integrated stereo headphone amplifier, and enhanced digital effects, housed in a 32-pin VQFN (RHB) 5x5 mm package. It integrates stereo 24-bit ADC and DAC paths with a PCM digital interface (I2S/left-/right-justified DSP/PCM) for portable audio and telephony designs. What is a stereo audio CODEC? A CODEC (coder-decoder) combines an analog-to-digital converter (ADC) and digital-to-analog converter (DAC) in a single device, supporting both microphone-record and headphone/speaker-playback paths. In the system hierarchy, the CODEC sits between the application processor (which runs audio software) and the analog transducers (microphones and speakers), translating between the digital audio stream and real-world acoustic signals. Stereo means two independent channels (left + right), as opposed to mono. Key features include a wide range of programmable I/O gain stages, single-ended or fully-differential output configurations, integrated PLL for flexible clock generation, and extensive register-based power control. The headphone amplifier provides ground-centered output for capless headphone connection, reducing BOM cost and PCB area. Programmable 3D, bass boost, and treble/midrange digital effects are executed inside the DSP core, offloading the host processor. Architecturally, the TLV320AIC3105 uses multi-bit sigma-delta ADCs and DACs with low-latency digital filters for natural audio reproduction. Three separate supply rails (analog 2.7V-3.6V, digital core 1.525V-1.95V, digital I/O 1.1V-3.6V) allow direct connection to a 1.8V host processor I/O while keeping the analog section on a clean 3.3V rail, which improves dynamic range and reduces digital switching noise coupling into the audio path. Typical applications include portable media players, smartphones, Bluetooth/USB audio dongles, headphone amplifiers, dictation/recording devices, and VoIP headsets. The wide input gain range and microphone biasing make it equally suited to handset and headset use cases; the small 5x5 mm QFN footprint enables compact wearable form factors. A common design tip is to keep the analog supply decoupling star-grounded to the headphone return path to minimize click/pop on enable transitions. The vendor recommends sequencing the analog supply before the digital I/O supply to avoid latch-up and to use the built-in PGA soft-mute ramps during power-up/power-down. This page synthesizes XAIPART pricing, drop-in alternatives, and practical design notes that complement - but do not replace - the manufacturer datasheet.

Angebot Kontakt
TLV320AIC3106IRGZT - Low-Power Stereo Audio CODEC | TI
TLV320AIC3106IRGZT

TLV320AIC3106IRGZT - Low-Power Stereo Audio CODEC | TI

The Texas Instruments TLV320AIC3106IRGZT is a low-power stereo audio CODEC with 10 inputs, 7 outputs, integrated headphone amplifier, and enhanced digital effects, housed in a 48-pin VQFN (RGZ) 7x7 mm package. It supports 16/20/24/32-bit PCM data at sample rates from 8 kHz to 96 kHz with 102 dBA signal-to-noise ratio on the DAC path, and operates from a 1.8 V digital supply plus a 3.3 V analog supply, consuming as little as 15 mW during stereo 48 kHz DAC playback. An audio CODEC (coder-decoder) is an integrated circuit that converts between digital audio streams and analog microphone/line/headphone signals, combining an ADC input path and DAC output path inside a single chip. The TLV320AIC3106 sits in the broader hierarchy of audio interface ICs -> interface ICs -> integrated circuits, and is widely deployed in portable, battery-powered, and space-constrained designs where low power, stereo playback, and integrated headphone drive are required simultaneously. Multiple line, microphone, and headphone amplifiers share an extensive register-based power-control interface, enabling fine-grained energy management as system use cases change. Key features of the TLV320AIC3106 include stereo 24-bit ADC and DAC with 102 dBA SNR, integrated 40 mW headphone amplifier, programmable 3D / bass / treble / EQ digital effects, and selectable single-ended or fully-differential analog inputs. The digital serial audio bus supports I2S, left-justified, right-justified, and DSP/PCM modes for flexible connection to virtually any application processor or DSP. An automatic gain control (AGC) block on the ADC path keeps microphone levels stable across varying speech distances. At the architectural level the device pairs a multi-bit delta-sigma modulator front end with on-chip FIR and IIR engine blocks so that tone control, EQ, and de-emphasis are applied digitally without burdening the host processor. PLL-based clock generation accepts common 12, 13, 24, or 27 MHz system clocks and derives all internal timing from them, simplifying board layout by removing the need for a dedicated audio master crystal in many designs. Extensive register-based power control keeps unused analog blocks powered down until audio paths are activated. Typical applications span portable media players, portable navigation devices, mobile phones and VoIP handsets, portable gaming, digital still cameras and camcorders, ultrasonic imaging, IP phones and USB headsets, as well as portable audio docks and Bluetooth speakers. The combination of low power, integrated headphone drive, and rich on-chip digital effects makes it equally suitable for stereo playback and full-duplex voice-capture products. When designing with this part, ensure both the 1.8 V digital and 3.3 V analog rails are well decoupled close to the IC, and that the PLL reference clock is selected to match the chosen MCLK frequency in software. Because the device supports both single-ended and differential microphone paths, designers should populate the unused input pins according to the datasheet reference circuit rather than leaving them floating. This page synthesizes distributor pricing, drop-in alternatives, and practical design considerations for the TLV320AIC3106IRGZT and its sibling variants into a single design-oriented reference beyond the raw manufacturer datasheet.

Angebot Kontakt