TLV2542ID - 12-Bit 200kSPS Dual SAR ADC | Texas Instruments
Teilenummer: TLV2542ID ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
TLV2542ID Übersicht
An ADC is an analog-to-digital converter, a data-conversion IC that samples a continuously varying voltage and produces a corresponding numeric code. A successive-approximation-register, or SAR, ADC determines each conversion result through a sequence of internal comparisons. SAR ADCs are commonly used where predictable sampling, moderate resolution, low power, and compact serial interfaces are more important than very high conversion throughput. The TLV2542 belongs to the broader ADC data-converter and signal-processing semiconductor hierarchy.
The TLV2542ID features 12-bit resolution, 140 kSPS or 200 kSPS maximum throughput options, and specified integral nonlinearity and differential nonlinearity of ±1 LSB maximum. Its signal-to-noise-plus-distortion ratio is specified at 72 dB, while the spurious-free dynamic range is 85 dB. The serial interface supports direct connection to microcontrollers, DSPs, and TMS320-compatible systems up to 10 MHz, reducing the need for external interface logic.
The converter uses a single analog supply, with analog input and digital interface functions integrated into a small package. Automatic power-down helps reduce consumption when conversions are not continuously required. The dual-channel architecture is useful for monitoring two independent signals, while the 12-bit code provides approximately 4096 digital levels for each channel. Exact input-range, reference, and absolute-input details must be confirmed in the manufacturer datasheet before final design release.
Typical applications include industrial process measurement, battery and power-system monitoring, portable instrumentation, sensor signal acquisition, and embedded DSP or MCU data logging. The serial interface reduces pin count compared with many parallel ADCs, while the dual input count allows one converter to serve two measurements. Designers should account for source impedance, sampling dynamics, reference accuracy, analog grounding, and serial-interface timing.
A key implementation consideration is the relationship between analog signal conditioning and ADC accuracy. The front-end should present a low-impedance source, provide suitable filtering for the measurement bandwidth, and keep analog routing away from noisy digital clock and switching signals. This page combines verified product information, distributor availability, application guidance, and replacement constraints for practical engineering review.
Drop-in-Alternativen für TLV2542ID – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
TLV2542CDGKR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TLV2542ID Grenzwerte & elektrische Eigenschaften
| Auflösung | 12 bit |
| Input Channels | 2 channels |
| Conversion Architecture | Successive-approximation register (SAR) |
| Maximum Throughput | 140 kSPS or 200 kSPS |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Output Interface | Serial output, SPI/DSP-compatible |
| Interface Clock | Up to 10 MHz |
| Integral Nonlinearity | +/-1 LSB maximum |
| Differential Nonlinearity | +/-1 LSB maximum |
| SINAD | 72 dB |
| Spurious-Free Dynamic Range | 85 dB |
| Built-In Conversion Clock | Yes |
| Chip Select | Yes |
| Automatic Power-Down | Supported |
| Betriebstemperatur | -40 C to +85 C |
| Gehäuse | 8-pin SOIC |
TLV2542ID 8-pin soic Pinbelegungsleitfaden
Pinbelegung für TLV2542ID (8-pin soic-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für TLV2542ID.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TLV2542ID ist geeignet für 6 Anwendungs: Industrial Sensor Acquisition, Battery-Powered Monitoring, DSP-Based Signal Acquisition, Portable Instrumentation, Process Control Monitoring, Embedded Data Logging.
Industrial Sensor Acquisition
The TLV2542ID fits industrial sensor acquisition when two analog signals must be digitized in a compact embedded controller. Its 12-bit resolution provides up to 4096 code levels, while the 140 kSPS or 200 kSPS throughput supports fast monitoring without requiring a parallel ADC bus. Place conditioning buffers or filters ahead of the inputs, maintain the documented input limits, and route the serial interface away from high-current switching paths. The main design tradeoff is that the supplied data does not confirm input range or reference limits, so the analog front end must be checked against the official datasheet before release.
Empfohlen
Battery-Powered Monitoring
The TLV2542ID is relevant to battery-powered monitoring because it operates from a single 2.7 V to 5.5 V supply and includes automatic power-down functionality. Two channels can monitor supply-related or sensor-related voltages with a 12-bit conversion result, while the serial interface reduces MCU pin requirements. Use a low-leakage voltage divider, controlled sensor enable sequence, and duty-cycled conversions when extending battery life. The supplied data does not provide active current or standby current, so current consumption must be obtained from the manufacturer datasheet before making a battery-life estimate.
Empfohlen
DSP-Based Signal Acquisition
The TLV2542ID is suitable for DSP-based acquisition because its serial output is described as SPI/DSP-compatible and TMS320 compatible up to 10 MHz. A DSP can control chip select and serial clock, receive the converted code, and process the two input channels without requiring a wide parallel data bus. The 12-bit resolution and 200 kSPS maximum throughput suit moderate-bandwidth measurement tasks. Firmware and hardware timing should be validated against the serial protocol, and the analog source impedance and reference arrangement should be designed from the complete datasheet.
Empfohlen
Portable Instrumentation
The TLV2542ID can support compact portable instrumentation that measures two low-bandwidth analog quantities and sends results over a serial bus. Its 8-pin SOIC package helps reduce board area, and the 12-bit resolution is suitable for many status, level, and sensor measurements where higher resolution is not essential. Use low-power modes, short conversion bursts, and careful analog grounding to preserve battery life. Because input range, supply current, and reference details are not included in the verified data, the final instrumentation design should be checked against the manufacturer datasheet.
Empfohlen
Process Control Monitoring
The TLV2542ID can digitize two process-related voltages for monitoring loops, status displays, or data logging. Its SAR architecture provides a practical conversion mechanism for sampled control signals, and the serial interface allows the analog front end to communicate efficiently with an MCU or DSP. Place anti-alias filtering and protection ahead of the inputs, keep the reference stable, and account for settling time after channel or signal changes. The verified material does not specify the full-scale input range, so sensor scaling and protection components cannot be finalized without the official electrical limits.
Empfohlen
Embedded Data Logging
The TLV2542ID is a practical choice for embedded data logging when two analog measurements must be stored periodically alongside MCU or DSP state. The automatic power-down feature supports intermittent operation, and the serial interface avoids consuming a large parallel GPIO bank. Use timestamped conversion sequencing in firmware, calibrate the two channels against known references, and include anti-alias filters sized for the logging bandwidth. Because the supplied sources do not provide current consumption or exact temperature specifications beyond the family information, power budgeting and environmental qualification require the manufacturer datasheet.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TLV2542ID – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TLV2542CDGKR |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC family comparison; exact suffix compatibility requires datasheet confirmation |
| Brand | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit |
| Input Channels | 2 channels | Dual-channel family position; verify exact configuration |
| Maximum Throughput | 140 kSPS or 200 kSPS | 200 kSPS family position; verify exact ordering option |
| Supply Voltage Range | 2.7 V to 5.5 V | Family data identifies 2.7 V to 5.5 V; verify exact suffix |
| Interface | SPI/DSP-compatible serial output | Family position is serial, TMS320-compatible; verify exact suffix |
| Interface Clock | Up to 10 MHz | Family data identifies up to 10 MHz; verify exact suffix |
Wichtigste Unterscheidungsmerkmale
- Dual-channel conversion in an 8-pin package (vs. TLV2542CDGKR)
- Serial interface reduces MCU pin count (vs. TLV2542CDGKR)
- Low-power operation for embedded systems (vs. TLV2542CDGKR)
Designhinweise
The TLV2542ID operates from a single 2.7 V to 5.5 V supply, so the analog and digital sections must share a carefully decoupled supply rail in most designs. Place the manufacturer-recommended bypass capacitors close to the supply pins, verify the required voltage range, and keep the reference and input return paths away from switching-node currents. Because the supplied data does not specify active current or reference limits, do not estimate power budget from generic ADC values; use the official datasheet.
Route the two analog inputs as short, quiet traces directly toward the converter, with analog ground and digital return currents kept separate where the system permits. Place input filtering and protection close to the source or connector, and avoid routing the serial clock and data lines parallel to sensitive analog traces. The serial interface reduces board width, but a proper ground reference and controlled return path remain necessary for repeatable 12-bit measurements.
Do not treat the distributor title as a complete electrical specification. In particular, confirm the TLV2542ID input range, reference voltage, sampling behavior, absolute maximum ratings, and temperature grade in the manufacturer datasheet before selecting resistor dividers or protection networks. Also verify the complete 8-pin SOIC pinout; the supplied verified data does not provide numbered pin assignments, so a guessed pin mapping could damage the design.
Compliance-Informationen
The supplied verified web data does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable based on the supplied general-purpose ADC information.
