Integrierte Schaltungen

5CSEBA5U23I7

5CSEBA5U23I7 - Cyclone V SE SoC FPGA 85K LE Dual A9 | Intel

The Intel 5CSEBA5U23I7 is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates 85K logic elements with a dual-core ARM Cortex-A9 MPCore hard processor subsystem, packaged in a 672-pin UBGA (23x23 mm). It is built on TSMC's 28nm low-power process and runs the HPS at up to 800 MHz while providing reconfigurable FPGA fabric, variable-precision DSP blocks, and 145 user I/O pins. A System-on-Chip FPGA is a heterogeneous device that fuses a general-purpose application processor subsystem with programmable logic on a single die. The hard processor subsystem executes OS-level workloads such as Linux, RTOS tasks, or protocol stacks, while the FPGA fabric accelerates custom datapaths, parallel interfaces, and DSP pipelines. This combination bridges the gap between standalone microcontrollers and traditional FPGAs, replacing two-chip ASIC+FPGA designs with one coherent device and reducing board area, BOM cost, and inter-chip latency. Key features of the 5CSEBA5U23I7 include 85K logic elements (LEs), approximately 4,450 Kbits of embedded memory (M10K + M9K), 87 variable-precision DSP blocks, and a high-speed HPS subsystem that includes dual ARM Cortex-A9 cores with CoreSight debug, NEON media engine, single/double-precision FPU, L1 caches, a 512 KB shared L2 cache, and integrated SDRAM, USB 2.0, Gigabit Ethernet, UART, SPI, I2C, and NAND controllers. The device supports DDR2/DDR3/LPDDR2 SDRAM with hardware ECC on the HPS side. The architecture pairs an ARM Cortex-A9 hard processor subsystem (HPS) with Cyclone V FPGA fabric through a high-bandwidth, low-latency bridge. The FPGA fabric is organized in logic-array blocks containing adaptive logic modules (ALMs), with dedicated multiplier and accumulator primitives inside each DSP block, enabling efficient fixed- and floating-point signal processing. A multi-gigabit serial interface is not present in the SE family; high-speed serial is provided on Cyclone V GX/SX variants. Typical applications include industrial motor control and drive, machine vision and factory automation, broadcast and professional audio/video processing, energy and smart-grid embedded systems, medical imaging front-ends, and automotive driver-assistance prototyping. The dual A9 cores run Linux or VxWorks while the FPGA fabric offloads deterministic I/O timing and DSP. When designing with this device, pay attention to power-rail sequencing: the FPGA core, HPS core, and I/O banks each require separate supplies with defined ramp-order requirements. Use Altera/Intel Quartus Prime with the Cyclone V device support to generate pin assignments, HPS pin muxing, and the preloader/U-boot configuration.

USD $145,50 Auf Lager

5CSEBA5U23I7LN

5CSEBA5U23I7LN - Cyclone V SE SoC FPGA, 85K LE, 925MHz | Intel

The Intel 5CSEBA5U23I7LN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with CoreSight debug and 85K logic elements of programmable FPGA fabric in a 672-pin UBGAs (23x23 mm) package. The device is speed-grade -7, operates across the industrial -40C to +100C junction range, and is rated for the 925 MHz HPS frequency tier (per DigiKey listing) versus the 800 MHz tier of the non-LN variant. It belongs to the Cyclone V SE family, optimized for low-power, cost-sensitive embedded systems requiring both CPU and FPGA fabric on a single die. A System-on-Chip FPGA combines a hard processor subsystem (HPS) with programmable logic (PL) on a single silicon die. The HPS section (dual ARM Cortex-A9 MPCore with NEON, single/double-precision FPU, 32 KB I-cache and D-cache per core, 512 KB shared L2, CoreSight debug) executes an OS such as Linux or RTOS, while the PL section handles custom datapath, DSP, memory interface, and high-speed I/O. This heterogeneous architecture bridges traditional MCUs (software-defined, fixed peripherals) and standalone FPGAs (parallel, but software overhead) for low-BOM-cost designs. Key features include: up to 85K logic elements, 4,450 Kbits embedded memory, 87 DSP blocks (18x18 multipliers), 288 configurable LVDS/SE I/Os (3.3V LVCMOS/LVTTL tolerant), 6 phase-locked loops, 12.5 Gbps total transceiver bandwidth (Cyclone V SE supports up to 6 transceivers up to 3.125 Gbps each), 1 Gb Ethernet MAC, USB 2.0 OTG, two CAN controllers, and dual DDR3/DDR3L/DDR2/LPDDR2 hard memory controllers in the HPS. Architecturally, the 5CSEBA5U23I7LN exposes five 3.3V I/O banks plus dedicated clock, PLL, configuration, and JTAG pins on the 672-UBGA. The HPS exposes its own peripherals (EMAC, USB, SD/MMC, NAND/NOR flash controllers) through dedicated MIO/HSMC routing. Power sequencing requires a strict 0.9V core -> 1.1V/1.2V/1.5V/1.8V/2.5V/3.3V I/O -> 1.5V/1.8V/3.3V RGMII -> 1.5V DDR3 ramp order, all monitored by a Power Management Bus (PMBus) controller. Typical applications: industrial motor control, machine vision, factory automation, multi-axis servo drives, portable medical imaging, broadcast video processing, and small-cell baseband. The integrated HPS eliminates the need for a companion processor, reducing board area, BOM cost, and latency between CPU and FPGA datapath. When designing with this device, provision for the 1.0V core, 1.5V DDR3, and 3.3V I/O rails using low-noise LDO or DC-DC converters; budget the 8-layer PCB stack-up for 100 ohm differential routing on GTX transceivers; and verify Quartus Prime device support before software bring-up. The 'L' suffix denotes a lower-power HPS tier; the 'N' suffix denotes lead-free reflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.

USD $325,00 Auf Lager

5CSEBA5U23I7N

5CSEBA5U23I7N - Cyclone V SE SoC FPGA 85K LE | Intel

The Intel 5CSEBA5U23I7N is a Cyclone V SE family System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 85,000 logic elements of 28 nm low-power FPGA fabric. The device is housed in a 672-ball UBGFA (23x23 mm) package, operates on a 1.1 V core supply, and supports industrial temperature range -40C to +100C with hot-swap capability. A System-on-Chip FPGA is a heterogeneous compute device that combines a general-purpose CPU subsystem (ARM Cortex-A9 with caches, MMU, and CoreSight debug) with a programmable logic fabric in a single silicon die. This architecture sits above discrete microcontrollers in the design hierarchy and below traditional ASIC + MPU combinations: SoC FPGA -> Cyclone V -> low-power FPGA family -> programmable logic -> semiconductor. The HPS typically handles OS, networking stacks, and control planes, while the FPGA fabric accelerates parallel dataplanes, custom peripherals, and high-bandwidth interfaces. Key features of the 5CSEBA5U23I7N include 85K logic elements, dual ARM Cortex-A9 cores, integrated CoreSight debug, on-chip HPS peripherals (EMAC, USB, SD/MMC, NAND), 800 MHz maximum HPS clock, and a shared interconnect between HPS and FPGA fabric. The Cyclone V SE SoC family delivers up to 301K logic elements at the high end, but the 5CSEBA5U23I7N targets the 85K sweet spot for cost-optimized industrial designs. Architecturally, the device uses TSMC's 28 nm low-power process, which reduces static power compared with the prior 40 nm Cyclone IV generation. The HPS-to-FPGA bridges (AXI-3 and Avalon) are tightly coupled over a multi-layer interconnect, allowing DMA engines to stream data between DDR controllers and custom accelerators with minimal CPU overhead. Typical applications include industrial machine vision, motor drives and robotics, factory automation controllers, military/aerospace signal processing, and medical imaging pre-processing. The integrated ARM cores eliminate an external processor on the PCB, shrinking BOM cost and latency for system control loops. When designing with this part, ensure the PCB footprint is UBGFA-672 (0.5 mm or 0.8 mm ball pitch per the package code - verify in the Cyclone V device handbook). Power sequencing must satisfy the HPS and FPGA rail bring-up order described in the Cyclone V SoC power management user guide; failure to sequence properly can prevent HPS boot. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $132,10 Auf Lager

5CSEBA5U23I7SN

5CSEBA5U23I7SN - Cyclone V SE SoC FPGA, 85K LE, ARM Cortex-A9 | Intel

The Intel (formerly Altera) 5CSEBA5U23I7SN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating 85K logic elements with a single-core ARM Cortex-A9 MPCore hard processor subsystem (HPS) in a 672-pin Ultra FineLine BGA (UBGA) package measuring 23x23 mm. The device supports up to 800 MHz HPS clock and operates from a 1.1 V core supply with industrial -40C to +100C temperature range. The SoC combines programmable FPGA fabric with an applications processor on a single die, enabling hardware-accelerated embedded designs. A System-on-Chip FPGA is an integrated device that merges a general-purpose processor (typically ARM Cortex-A) with FPGA programmable logic on the same silicon die, sharing high-bandwidth interconnect. This architecture eliminates the need for a separate processor and FPGA pair on the PCB, reducing board area, latency, and power. Within the taxonomy, the 5CSEBA5U23I7SN belongs to the family: SoC FPGA -> FPGA -> programmable logic -> semiconductor device. Cyclone V SE devices specifically target low-power, cost-sensitive applications while still providing transceiver and DSP capability. Key features of the 5CSEBA5U23I7SN include approximately 85K logic elements, embedded memory blocks, variable-precision DSP blocks, and integrated transceivers supporting common serial protocols. The HPS includes ARM Cortex-A9 core with NEON media engine, single or dual-precision floating point unit, L1/L2 caches, integrated memory controller for DDR2/DDR3, and a rich set of peripherals including USB 2.0, Gigabit Ethernet, CAN, SPI, I2C, and UART. The device ships in a 23x23 mm UBGA-672 package suitable for high-density SMT assembly. The architecture leverages Intel's low-power process technology and a hardened interconnect between the HPS and FPGA fabric. This allows deterministic data movement between processor and custom logic at multi-Gbps rates through AXI bridges. Engineers gain flexibility to implement custom peripherals, hardware accelerators, and high-speed interfaces in the FPGA portion while running Linux or RTOS on the ARM cores. Typical applications include industrial motor control and machine vision, factory automation and robotics, medical imaging equipment, broadcast video processing, automotive driver assistance, military/aerospace signal processing, and telecom infrastructure. The combination of ARM Cortex-A9 Linux support with FPGA fabric acceleration is well-suited for edge computing, protocol bridging, and sensor fusion. When designing with the 5CSEBA5U23I7SN, allocate sufficient PCB layers (typically 8+) for the high-speed HPS DDR3 interface and FPGA transceiver routing. The UBGA-672 package requires 0.8 mm pitch BGA assembly capability and X-ray inspection post-reflow. Use Intel Quartus Prime design software with SoC EDS for HPS firmware development. This page synthesizes Intel/Altera datasheet parameters, real-time distributor pricing from DigiKey/Mouser, drop-in alternatives within the Cyclone V family, and design considerations that extend beyond the standard datasheet to support rapid evaluation and procurement.

USD $310,00 Auf Lager

5CSEBA6U19A7N

5CSEBA6U19A7N - Cyclone V SE SoC FPGA 110K LE | Intel

The Intel (formerly Altera) 5CSEBA6U19A7N is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug and a 110K logic-element FPGA fabric in a single 484-pin UBGFA / UFBGA package measuring 19x19 mm. The device combines programmable logic with a hardened application processor subsystem, providing engineers with both hardware acceleration and software programmability on a low-power process node, with core logic voltage of 1.1 V and operating speed grade of -7. A SoC FPGA is an integrated circuit that fuses a general-purpose microprocessor subsystem (typically ARM Cortex-A cores) with programmable FPGA logic on the same die. This architecture occupies the midpoint of the embedded computing hierarchy between pure microcontrollers (firmware-only execution), application processors (software-only execution), and standalone FPGAs (hardware-only logic). By co-integrating both domains, SoC FPGAs target designs that demand real-time deterministic I/O alongside high-level operating-system workloads such as Linux, thereby reducing board area, BOM cost, and inter-chip latency compared to two-chip processor-plus-FPGA solutions. Key device features include 110,000 logic elements, embedded M10K and MLAB memory blocks, variable-precision DSP blocks, dual 32-bit ARM Cortex-A9 MPCore CPUs with NEON media engine and single/double-precision FPU, CoreSight debug and trace, integrated peripherals (EMAC, USB, CAN, SPI, I2C, UART, NAND/NOR flash controller, DDR3 controller with ECC), and an automotive AEC-Q100 temperature grade. The device supports industrial temperature range operation and is suitable for safety-critical and harsh-environment deployments. Typical applications include industrial machine vision, motor control and robotics, automotive driver assistance systems, broadcast equipment, factory automation, and military/aerospace signal processing. The integrated HPS and FPGA fabric enable deterministic low-latency sensor pipelines combined with high-level protocol handling. Designers should review the Cyclone V Device Handbook and the HPS technical reference manual for clocking, pinout, and power-sequencing requirements. Proper decoupling, multi-rail sequencing between the HPS and FPGA supplies, and thermal management are essential for reliable operation. This page consolidates distributor pricing, drop-in same-family alternatives, and engineering design guidance not collected in any single manufacturer datasheet.

USD $198,40 Auf Lager

5CSEBA6U19C6N

5CSEBA6U19C6N - Cyclone V SE SoC FPGA 110K LE Dual A9 | Altera

The Altera (Intel) 5CSEBA6U19C6N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a Dual ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 110K Logic Elements of Cyclone V FPGA fabric, in a 484-pin UBGА (19x19 mm) package with industrial-grade speed grade -6 and 925 MHz HPS frequency. A Cyclone V SE SoC FPGA is a heterogeneous compute device that combines an ARM Cortex-A9 application processor subsystem with a low-power FPGA fabric on a single die, enabling designers to partition deterministic control, data-path, and interface logic between hardware-accelerated FPGA logic and software running on a Linux or RTOS host. SoC FPGAs sit between pure ASICs and standalone FPGAs in the system-hierarchy and are widely used in industrial vision, motor control, and protocol bridging where both software flexibility and hardware determinism are required. The 5CSEBA6U19C6N features approximately 110K Logic Elements, embedded M10K memory blocks, variable-precision DSP blocks, integrated PCIe Gen2 hard IP, multi-port memory controllers, and a rich set of user I/O supporting LVDS, LVCMOS, SSTL, and HSTL standards. The HPS block provides dual 800 MHz Cortex-A9 cores, NEON media engine, L1/L2 cache, ARM Mali-400 class GPU option on certain variants, and a coherent interconnect to the FPGA fabric via AXI bridges. The device is built on TSMC's 28 nm low-power process technology and uses a 925 MHz HPS frequency and -6 industrial speed grade. The 484-pin UBGА (UBGA-484, 19x19 mm) package provides the necessary signal integrity and thermal dissipation for the integrated HPS plus fabric, with a thermal resistance suitable for forced-air or conduction-cooled industrial enclosures. Typical applications include industrial machine vision and smart cameras, motor control and servo drives, programmable logic controllers (PLCs), industrial Ethernet protocol bridging (EtherCAT, PROFINET, EtherNet/IP), and test & measurement equipment. The combination of ARM Cortex-A9 processing and FPGA acceleration allows real-time analytics, sensor fusion, and high-speed I/O expansion in a single chip. When designing with this SoC FPGA, ensure that the HPS boot configuration (NAND, QSPI, SD/MMC, eMMC) is selected correctly for the application, that DDR3 memory layout matches the HPS memory controller requirements, and that proper thermal management is implemented to keep junction temperature below 100 C under worst-case workloads. Designers should also plan for board support package (BSP) generation using Altera/Intel SoC EDS and pin-mux assignment via Quartus Prime. This page synthesizes distributor pricing, drop-in same-family Cyclone V SE alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing, replacement, and application guidance.

USD $194,15 Auf Lager

5CSEBA6U19C7N

5CSEBA6U19C7N - Cyclone V SE SoC FPGA, 110K LE, Dual ARM Cortex-A9 | Intel

The Intel 5CSEBA6U19C7N is a Cyclone V SE System-on-Chip FPGA integrating 110K logic elements with a hard dual-core ARM Cortex-A9 MPCore processor subsystem (800 MHz) and CoreSight debug, housed in a 484-pin UBGAFBGA (19x19 mm) package. It combines a low-power 28 nm FPGA fabric with a hard processor system (HPS) including peripherals, DDR controllers, and interconnect, delivering up to 925 MHz SoC operation and a rich logic-and-processing platform for embedded designs. What is an SoC FPGA? An SoC FPGA is an integrated circuit that pairs a programmable FPGA fabric with a hard processor subsystem on a single die, combining the parallelism and I/O flexibility of an FPGA with the deterministic software execution of an ARM Cortex-A class processor. SoC FPGAs sit at the intersection of microcontrollers, ASICs, and traditional FPGAs, enabling hardware acceleration alongside a general-purpose OS (typically Linux). The Cyclone V SE family targets cost- and power-sensitive applications that still need DSP blocks, transceivers in selected variants, and tight processor-to-FPGA coupling. Key features of the 5CSEBA6U19C7N include 110K logic elements, integrated 925 MHz dual-core ARM Cortex-A9 HPS, on-chip DDR3 controller, 66 user I/O from the U19 (484-pin) package, low-power 28 nm process, and CoreSight debug support. The device balances logic capacity with embedded processing, eliminating the need for a discrete companion processor in many designs. Embedded transceiver blocks and variable-precision DSP blocks extend its reach into motor control, industrial networking, and video bridging. The Cyclone V SE architecture uses TSMC's 28 nm low-power process with adaptive logic modules (ALMs), M20K embedded memory blocks, and fractional PLLs. The HPS includes ARM Cortex-A9 cores with NEON media engine, single/double-precision FPU, L1/L2 caches, and a multi-port SDRAM controller supporting DDR3 up to 32-bit data width with ECC. The FPGA-to-HPS bridges (AXI-32/64/128) enable high-throughput coprocessing for DSP and packet-processing workloads. Typical applications include industrial motor control and PLCs, video surveillance and machine vision, factory automation gateways, smart energy metering, and medical instrumentation. The combination of dual ARM cores, FPGA fabric, and DDR3 memory makes the 5CSEBA6U19C7N particularly well suited to Linux-driven embedded systems that offload time-critical DSP to FPGA fabric. When designing with this device, plan power sequencing for the HPS and FPGA rails independently and allocate sufficient board area for thermal dissipation; the 28 nm process keeps static power low but dynamic power scales with toggle rate. Quartus Prime provides the integrated toolchain (LogicLock, Platform Designer, HPS configuration) and Linux BSP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $155,29 Auf Lager

5CSEBA6U19C7SN

5CSEBA6U19C7SN - Cyclone V SE SoC FPGA 110K LE | Intel

The Intel 5CSEBA6U19C7SN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a hard ARM Cortex-A9 MPCore dual-core processor subsystem with an FPGA fabric of approximately 110K logic elements, housed in a 484-pin Ultra BGA (19x19 mm) package with industrial-grade temperature rating and RoHS compliance. Cyclone V SE SoC FPGAs belong to the mid-range, low-power SoC family that combines an FPGA fabric with a hard processor system (HPS) on a single die. The HPS integrates dual ARM Cortex-A9 MPCore CPUs running up to 800 MHz (per the DigiKey listing), plus CoreSight debug, L1/L2 caches, memory controllers, and standard peripherals. The FPGA fabric provides programmable logic with variable-precision DSP blocks and on-chip memory. This integration reduces BOM count, board area, and power versus a discrete CPU+FPGA design, while enabling tight hardware/software partitioning for embedded systems. Key specifications include 110K logic elements, 66 user I/O pins from the FPGA bank exposed on the package (additional HPS pins are also bonded out), 800 MHz maximum HPS clock, embedded transceivers not enabled on this SE variant, and a 484-pin UBGAs 19x19 mm BGA package. The device supports DDR2/DDR3/LPDDR2 memory interfaces from the HPS side and integrates variable-precision DSP blocks for signal-processing pipelines. Typical applications include industrial motor control, factory automation controllers, machine vision pre-processing, portable medical instrumentation, smart-grid energy monitoring, broadcast video processing, and aerospace/defense embedded systems where deterministic real-time hardware logic must coexist with a Linux-capable application processor on a single chip.

USD $149,85 Auf Lager

5CSEBA6U19C8N

5CSEBA6U19C8N - Cyclone V SE SoC FPGA, 110K LE, Dual A9 | Intel

The Intel (formerly Altera) 5CSEBA6U19C8N is a Cyclone V SE System-on-Chip FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with 110K logic elements of FPGA fabric, housed in a 484-pin UBG A (19x19 mm) package and rated for commercial temperature operation. According to the verified distributor listing from DigiKey, this SoC variant delivers up to 600 MHz HPS clock frequency and is built on a low-power process that balances functionality with power efficiency. A System-on-Chip (SoC) FPGA is an integrated circuit that combines a programmable FPGA fabric with a hard processor subsystem on a single die, enabling deterministic hardware acceleration alongside software execution. Within the broader taxonomy, this places the 5CSEBA6U19C8N at the intersection of programmable logic devices (FPGA & CPLD category), application processors, and embedded computing platforms. The Cyclone V SE family specifically targets cost-sensitive, low-power embedded applications where deterministic real-time response and parallel hardware processing are required alongside a Linux-capable application processor. Key differentiating features include the hard dual-core ARM Cortex-A9 MPCore with CoreSight debug, an 110K-logic-element FPGA fabric for custom datapath acceleration, integrated peripherals such as Gigabit Ethernet MAC, USB 2.0 OTG, DDR3 controller, and a variable-precision DSP block set. The '8' speed grade and 'C' temperature grade indicate commercial-tier silicon characterized for typical industrial and commercial operating profiles, while the 'N' suffix denotes a Pb-free/RoHS-compliant package finish. Architecture-wise, the device implements a coherent HPS-to-FPGA bridge via the AXI bus matrix, allowing the ARM cores to access FPGA-implemented accelerators with low latency. The 28 nm low-power process enables static power reductions compared with previous-generation Cyclone IV devices, while the 600 MHz Cortex-A9 cores deliver approximately 4000 DMIPS of aggregate processing throughput. Typical applications include industrial motor control, factory automation gateways, video surveillance edge analytics, machine vision pre-processing, portable medical instrumentation, and embedded vision systems where an SoC FPGA consolidates CPU, DSP, and glue logic into a single chip. This page synthesizes distributor pricing, same-family drop-in alternatives drawn from XAIPART's internal MPN catalog, and practical design notes not found in the manufacturer datasheet.

USD $195,00 Auf Lager

5CSEBA6U19C8SN

5CSEBA6U19C8SN - Cyclone V SE SoC FPGA 110K LE, ARM A9 | Intel

The Intel (formerly Altera) 5CSEBA6U19C8SN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a single ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 110K logic elements of low-power FPGA fabric, packaged in a 484-pin UFBGA (19x19 mm). The device targets power-efficient embedded systems requiring a hard processor alongside programmable logic. What is a SoC FPGA? A SoC FPGA combines a hard processor subsystem (HPS) with FPGA fabric on a single die, bridging the gap between microcontrollers and standalone FPGAs. Within the broader taxonomy, the 5CSEBA6U19C8SN sits as: SoC FPGA -> FPGA & SoC -> Programmable Logic -> Integrated Circuit -> Semiconductor. This integration reduces board area, simplifies power sequencing between processor and fabric, and enables higher-bandwidth processor-to-FPGA bridges than discrete multi-chip solutions. Key features include the dual-issue ARM Cortex-A9 MPCore with NEON media engine and single-precision FPU, up to 600 MHz HPS clock, 110K logic elements, 224 DSP blocks (18x18 multipliers), and integrated transceivers up to 5 Gbps. The 28nm low-power process delivers static power below typical competing 40/65nm FPGAs, while the variable-precision DSP architecture allows designers to trade precision for dynamic power on a block-by-block basis. Technical depth: the device implements a coherent Cortex-A9 core with 32 KB L1 instruction and data caches per core, 512 KB shared L2 cache, and a multi-port SDRAM controller supporting DDR2/DDR3/LPDDR2. The FPGA fabric uses 8-input adaptive logic modules (ALMs), M20K embedded memory blocks, and up to 224 variable-precision DSP blocks. Processor-to-FPGA interconnect uses the AXI bridge, enabling >125 Gbps aggregate throughput between HPS and fabric. Typical applications include industrial motor control, factory automation, machine vision, automotive driver-assistance prototypes, video surveillance, and low-cost software-defined radio. The 5CSEBA6U19C8SN is also widely deployed in embedded Linux single-board computers where deterministic real-time response is required alongside user-space Linux. A primary design consideration is PCB layout for the 484-ball UFBGA - all 484 balls must be routed on a high-density interconnect (HDI) board with micro-via stackups, and at least one full PCB layer must be dedicated to GND under the package thermal pad for thermal dissipation. This page synthesizes distributor pricing, drop-in same-family alternatives from the Site MPN list, and practical design notes not found in the manufacturer datasheet alone.

USD $205,00 Auf Lager

5CSEBA6U19I7LN

5CSEBA6U19I7LN - Cyclone V SE SoC FPGA 110K LE | Intel

The Intel 5CSEBA6U19I7LN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating 110K logic elements with a dual-core ARM Cortex-A9 MPCore hard processor subsystem plus CoreSight debug in a single 484-pin Ultra FineLine BGA (UBGA) package measuring 19x19 mm. It belongs to the Cyclone V SE family, targeting cost- and power-sensitive embedded applications that need a deterministic FPGA fabric tightly coupled to an applications processor. The integrated ARM subsystem runs up to 925 MHz and shares a hardened multiport SDRAM controller with the FPGA fabric, eliminating the need for an external processor companion. A System-on-Chip (SoC) FPGA is a heterogeneous compute device that combines a general-purpose processor subsystem, hardened memory and peripherals, and a programmable logic fabric on one silicon die. This architecture sits in the broader hierarchy of embedded processors: microcontroller -> microprocessor -> applications processor -> SoC -> SoC FPGA. Compared to a discrete FPGA-plus-MPU solution, a Cyclone V SE SoC FPGA reduces board area, lowers bill-of-materials cost, and simplifies high-bandwidth fabric-to-processor data paths through on-chip AXI/ARM Cortex-A9 MPCore bridges. Key features of the 5CSEBA6U19I7LN include 110K logic elements, embedded 32-bit Cortex-A9 MPCore dual-core processor subsystem, 64-bit ECC-capable DDR3 hard memory controller, and integrated CoreSight debug. The device supports industrial temperature range and the commercial speed grade 7 silicon for moderate-speed designs. Embedded multipliers and M10K memory blocks enable on-chip DSP and buffering without consuming fabric. Architecturally, the Cyclone V SE fabric uses TSMC 28 nm low-power process technology, achieving static power reductions of up to 40% versus prior Cyclone generations. The hard ARM subsystem includes NEON media engine, single/double-precision FPU, and dedicated L1 caches per core plus a shared L2 cache, enabling Linux and real-time OS workloads alongside RTL accelerators. Typical applications include industrial motor control, factory automation HMI panels, video surveillance encoders, machine vision pre-processing, and portable medical instrumentation. The combination of low static power and a hardened ARM core makes it well suited for always-on embedded systems where a soft-core-only FPGA would overtax power budgets. When designing with this device, allocate sufficient PCB area for the 484-pin UBGA 19x19 mm footprint and follow Intel's pinout guidelines for power-pin decoupling. Quartus Prime software (Standard or Pro edition) is required for synthesis, place-and-route, and HPS firmware development, with the Intel SoC EDS providing GCC/Linaro toolchains for the ARM side. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $288,90 Auf Lager

5CSEBA6U19I7N

5CSEBA6U19I7N - Cyclone V SE SoC FPGA, 110K LE, Dual ARM Cortex-A9 800MHz | Intel

The Intel (formerly Altera) 5CSEBA6U19I7N is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with a 110K logic-element FPGA fabric in a single 484-pin UBGAFBGA package measuring 19x19 mm. The device combines up to 800 MHz of HPS performance with Cyclone V SE programmable logic, 3.125 Gbps transceivers, and hard memory controllers, delivering a balance of power efficiency, deterministic real-time control, and high-bandwidth processing for embedded vision, industrial motor control, and software-defined radio applications. What is an SoC FPGA? An SoC FPGA integrates a microprocessor subsystem (typically ARM Cortex-A9) with a programmable FPGA fabric on the same die. The architecture hierarchy is SoC -> SoC FPGA -> programmable logic device -> semiconductor IC. SoC FPGAs allow designers to implement deterministic hardware accelerators and real-time control in the FPGA fabric while running application processors, operating systems (Linux, VxWorks), and high-level software on the HPS. Compared to a discrete CPU + FPGA pair, an SoC FPGA reduces board area, lowers interconnect latency, and simplifies PCB routing by eliminating external bus traces between processor and programmable logic. Key features of the 5CSEBA6U19I7N include 110K logic elements, 4.45 Mbits of embedded memory, dual ARM Cortex-A9 MPCore processors with NEON media-processing engine and single/double-precision floating-point unit, hardware memory controllers supporting DDR3/DDR3L/LPDDR2, and on-chip 9-transceiver channels capable of up to 3.125 Gbps. The industrial temperature grade (-40C to +100C ambient) supports harsh-environment deployments. Configuration is via industry-standard JTAG (IEEE 1149.1) and Active Serial (AS) modes using EPCS or EPCQ flash devices. From an architectural perspective, the Cyclone V SE device family uses a TSMC 28 nm low-power process and Intel's Adaptive Logic Module (ALM) fabric. The HPS includes a multi-port SDRAM controller, NAND flash controller, SD/eMMC card controller, USB 2.0 OTG, 10/100/1000 Ethernet MAC, and a 16550-compatible UART. Coherent interconnect between the HPS and FPGA fabric is provided by three on-chip bridges (FPGA-to-HPS, HPS-to-FPGA, and lightweight HPS-to-FPGA), enabling shared-memory communication without external bus arbitration. Typical applications include industrial machine vision and smart cameras, programmable logic controllers (PLC) with deterministic motion control, software-defined radio (SDR) baseband processing, broadcast video encoders, and driver assistance systems (ADAS) for entry-level automotive platforms. The dual-core ARM cluster runs Linux or RTOS for high-level control, while the FPGA fabric implements custom sensor interfaces (MIPI CSI-2, LVDS, GigE Vision), real-time servo loops, and hardware-accelerated image-processing pipelines. When designing with the 5CSEBA6U19I7N, pay close attention to the multi-rail power sequencing requirement. The HPS core, FPGA core, transceivers, and I/O banks each require independent voltage rails that must power up and down in a manufacturer-specified order to avoid in-rush current and latch-up. Decoupling capacitor selection and PLL power filtering are critical to achieving the advertised transceiver jitter performance of under 0.5 UI. This page synthesizes distributor pricing, drop-in alternatives from the Cyclone V SE family, and practical design notes not found in the manufacturer datasheet. All data was last verified on 2026-09-06 against distributor listings (DigiKey, Mouser, Octopart, Heisener) and the official Altera product page.

USD $142,75 Auf Lager

5CSEBA6U19I7NTS

5CSEBA6U19I7NTS - Cyclone V SE SoC FPGA, 110K LE, 925MHz, 484-UBGA | Intel

The Intel (formerly Altera) 5CSEBA6U19I7NTS is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with CoreSight debug and trace alongside an 110K-logic-element FPGA fabric, packaged in a 484-ball UBGA (19x19 mm) and operating at up to 925 MHz. The 'TS' suffix denotes tape-and-reel delivery, the 'I7' speed grade denotes industrial temperature range (-40C to +100C), and the part belongs to the high-functionality, low-power Cyclone V SE family. What is an SoC FPGA? An SoC FPGA combines a traditional FPGA fabric (programmable logic, DSP blocks, memory, and transceivers) with a hard ARM-based application processor subsystem on a single die, delivering deterministic real-time performance in the programmable logic while the HPS runs operating systems such as Linux or RTOS. It sits in the broader hierarchy of FPGA & CPLD > programmable logic > semiconductor > integrated circuit. SoC FPGAs bridge the gap between microcontrollers (insufficient parallelism) and pure ASICs (high NRE cost), making them ideal for mid-volume embedded designs. Key specifications include 110K logic elements, 925 MHz HPS core frequency, integrated DDR3/3L memory controller, 32-bit ECC support, and high-speed peripheral interfaces including Gigabit Ethernet, USB 2.0 OTG, CAN, SPI, I2C, and UART. The Cyclone V architecture is built on TSMC's low-power 28 nm process, achieving up to 40% lower power than the previous Cyclone IV generation while delivering higher logic density and DSP performance. Typical applications span industrial motor control, factory automation, video surveillance, automotive ADAS, smart grid, and medical imaging. The combination of an ARM Cortex-A9 HPS with programmable logic enables hardware-accelerated custom peripherals alongside a Linux-capable application processor, eliminating the need for a discrete MCU/FPGA combination and reducing BOM cost and PCB area. The industrial temperature grade supports deployment in harsh environments such as factory floors and outdoor enclosures. When designing with this part, allocate PCB area for the HPS-to-FPGA bridge (AXI/ARM Cortex-A9 MPCore HPS-to-FPGA AXI bridges), provide separate power rails for the HPS and FPGA core, and ensure the DDR3 interface is routed with matched-length traces and proper impedance. Quartus Prime software (Subscription Edition required for SoC) is used for FPGA configuration, HPS firmware, and pin planning.

USD $46,25 Auf Lager

5CSEBA6U19I7SN

5CSEBA6U19I7SN - Cyclone V SE SoC FPGA 110K LE | Intel | UBGA-484

The Intel (formerly Altera) 5CSEBA6U19I7SN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a single ARM Cortex-A9 MPCore hard processor system with CoreSight debug, alongside an FPGA fabric of 110K logic elements (LEs), in a 484-pin UBGA (19x19 mm) package at industrial temperature grade. The Cyclone V SE family is built on TSMC's 28nm low-power process and targets balanced performance-per-watt for cost-sensitive embedded applications. A System-on-Chip (SoC) FPGA combines a hard processor subsystem (HPS) - in this case a single-core ARM Cortex-A9 with NEON media engine, single/double-precision FPU, 32KB I-cache and 32KB D-cache, plus 512KB L2 cache - with an FPGA fabric on a single die, sharing a high-bandwidth interconnect. This SoC architecture sits within the broader taxonomy: SoC FPGA -> FPGA -> programmable logic device -> semiconductor. Compared with discrete CPU-plus-FPGAs, it offers lower BOM cost, tighter latency, and unified power management. Key features of the 5CSEBA6U19I7SN include 110K LEs, 4150 LABs, 66 user I/Os, 64KB of on-chip RAM per the marketing part description, support for DDR3/DDR3L/LPDDR2 external memory through the HPS, variable-precision DSP blocks, and integrated phase-locked loops. The part runs the HPS at up to 800 MHz (per Cyclone V SE family specifications) and operates over the industrial -40C to +100C (or 100C) junction range. The device is RoHS compliant and ships in lead-free UBGA-484 surface-mount packaging. Architecturally, the device pairs a Cyclone V FPGA fabric with a single-core ARM Cortex-A9 HPS through a high-throughput ARM Cortex-A9 MPCore coherent interconnect, supporting symmetric multiprocessing semantics even on the single-core variant. The HPS includes standard peripherals: EMAC, USB 2.0 OTG, CAN, SPI, I2C, UART, SD/MMC controller, and NAND flash controller, eliminating external companion chips for common interfaces. Typical applications include industrial motor control and machine vision, factory automation HMIs, low-cost video processing pipelines, point-of-sale terminals, medical patient monitoring, broadcast auxiliary data handling, and defense/aerospace sub-systems where a hardened ARM core plus FPGA DSP is required. Designers value the part for unifying deterministic FPGA logic and a Linux-capable processor on one die. When designing with the 5CSEBA6U19I7SN, allocate pins early between HPS and FPGA banks, ensure adequate PCB thermal relief for the 19x19 mm UBGA, and use Quartus Prime software (Standard edition suffices) for synthesis, place-and-route, and HPS configuration. Plan the boot source (NAND, SD/MMC, or QSPI) at the architecture stage because the HPS boot pins are muxed. This page synthesizes distributor pricing, drop-in alternatives within the Cyclone V SE family, and practical design notes not aggregated in the manufacturer datasheet alone.

USD $305,00 Auf Lager

5CSEBA6U23A7N

5CSEBA6U23A7N - Cyclone V SE SoC FPGA 110K LE | Intel

The Intel (formerly Altera) 5CSEBA6U23A7N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with a 110K logic-element FPGA fabric, fabricated on a 28 nm low-power process and housed in a 672-pin UBG A (23x23 mm) package. It is AEC-Q100 qualified for automotive applications and operates across the -40C to +85C industrial temperature range. A System-on-Chip FPGA is a single device that combines a general-purpose processor subsystem (in this case, ARM Cortex-A9 with CoreSight debug) with a programmable FPGA fabric on the same die, eliminating the need for a discrete processor plus separate FPGA. Within the broader hierarchy, this places the part as: SoC FPGA -> FPGA -> Programmable Logic Device -> Integrated Circuit -> Semiconductor. Cyclone V SE variants specifically target cost- and power-sensitive embedded systems with moderate logic density. Key features include 110K logic elements, 700 MHz processor subsystem performance, an integrated HPS with peripherals (DDR controller, USB, Ethernet, UART, SPI, I2C), high-speed transceivers, variable-precision DSP blocks, and 1.1 V core operation. The device is built on TSMC's 28 nm low-power process to optimize the watts-per-100K-LE metric common in mid-range FPGAs. The architecture pairs the FPGA fabric with a dedicated HPS (Hard Processor System) block connected via a high-bandwidth on-chip interconnect, allowing deterministic data exchange between software running on the Cortex-A9 and custom accelerator logic in the FPGA. The 672-UBGA package provides the high I/O count needed for industrial motor control, automotive driver-assistance, and vision pre-processing applications. Typical applications include industrial motor control, automotive ADAS sensor fusion, machine vision pre-processing, factory automation controllers, and HMI (human-machine interface) systems. The automotive-grade temperature rating and AEC-Q100 compliance make it well-suited for in-cabin electronics and chassis-domain controllers. When designing with this device, ensure PCB layout supports 1.1 V core supply decoupling, DDR3/DDR3L routing to the HPS, and sufficient thermal copper under the UBG A to handle peak FPGA power dissipation. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, with information extracted from the 5CSEBA6U23A7N datasheet, the Cyclone V Device Handbook, and current distributor listings as of 2026-09-06.

USD $225,00 Auf Lager

5CSEBA6U23C6N

5CSEBA6U23C6N - Cyclone V SE SoC FPGA, 110K LE, Dual ARM Cortex-A9, 672-UBGA | Intel

The Intel 5CSEBA6U23C6N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, alongside a 110K-logic-element FPGA fabric, in a 672-pin UBGAs (23x23 mm) package at 925 MHz HPS clock and 1.1 V core. It is the highest-density member of the 5CSEBA6 logic family in the U23 speed/temperature grade with the commercial C6 ordering code, balancing low-power 28 nm process technology with an integrated HPS that reduces bill-of-materials in embedded designs. A System-on-Chip (SoC) FPGA is a class of heterogeneous computing device that tightly couples a programmable logic fabric with a hard processor subsystem on the same silicon die, offering the I/O flexibility and parallelism of an FPGA with the deterministic software execution of an embedded CPU. SoC FPGAs sit at the intersection of microcontrollers, ASICs, and traditional FPGAs in the embedded-processing taxonomy, enabling hardware-accelerated peripherals alongside a Linux-capable application processor. The 5CSEBA6U23C6N specifically targets low-power, cost-sensitive industrial and video/embedded applications where board space, BOM, and power are constrained. Key features include 110,000 logic elements, 224 (18x18) hardware multipliers, approximately 5.7 Mbits of embedded memory, dual ARM Cortex-A9 MPCore CPUs with NEON media engine and single/double-precision FPU, CoreSight debug and trace, integrated peripherals (USB 2.0 OTG, Gigabit Ethernet MAC, DDR3 controller, CAN, SPI, I2C, UART), and up to 145 user I/O pins. The device is built on TSMC's 28 nm low-power process and uses a 1.1 V core supply with dedicated HPS and FPGA power rails. The HPS-FPFPGA bridge architecture provides up to 128-bit wide AXI buses between the processor subsystem and the FPGA fabric, enabling low-latency DMA and accelerator offload. Hardware multipliers, variable-precision DSP blocks, and embedded M10K memory blocks allow DSP-intensive pipelines to run alongside the HPS without contention. The 672-UBGA package exposes dedicated HPS I/O (DDR3, USB, Ethernet) and FPGA I/O banks for LVDS, LVCMOS, and RSDS signalling. Typical applications include industrial machine vision and video surveillance, motor control and factory automation, broadcast video processing, medical imaging, and low-power embedded computing where Linux and FPGA acceleration coexist. The integration of the HPS removes the need for a separate processor MCU/MPU and companion power tree. When designing with this device, allocate separate decoupling for HPS and FPGA rails, follow Intel's EMIF guidelines for DDR3 PCB routing, and validate pin assignments in Intel Quartus Prime and the SoC EDS toolchain. The -C6 commercial speed grade and 0 C to +85 C junction temperature are appropriate for indoor industrial deployments.

USD $185,00 Auf Lager

5CSEBA6U23C7N

5CSEBA6U23C7N - Cyclone V SE SoC FPGA 110K LE Dual A9 672-UBGA | Intel

The Intel / Altera 5CSEBA6U23C7N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a hard dual-core ARM Cortex-A9 MPCore processor subsystem with CoreSight debug and a 110K logic-element FPGA fabric in a single 672-UBGA (23x23 mm) package. It combines a high-performance 800 MHz application processor subsystem with a low-power 28 nm FPGA fabric, providing designers with a flexible heterogeneous compute platform for embedded and industrial systems. What is a SoC FPGA? A SoC FPGA is an integrated device that merges a microprocessor subsystem (typically ARM Cortex-A9 MPCore) with a programmable FPGA fabric on the same silicon die. This combination sits within the broader hierarchy of embedded computing: SoC -> System-on-Chip -> integrated circuit -> semiconductor. By co-locating the hard processor and the fabric, SoC FPGAs deliver lower system latency, reduced BOM count, smaller PCB area, and deterministic hardware acceleration that discrete processor-plus-FPGA two-chip solutions cannot match. Key features of the 5CSEBA6U23C7N include the 110K logic element FPGA fabric, integrated DDR3 memory controller with hard PHY support, 3.125 Gbps transceivers on select variants, and a hard floating-point DSP block array for high-throughput signal processing. The HPS (Hard Processor System) includes dual ARM Cortex-A9 cores with NEON media engine, L1/L2 caches, ARM CoreSight JTAG debug, and standard peripherals such as USB 2.0, Gigabit Ethernet, UART, SPI, I2C, and SD/eMMC controllers. The device is built on TSMC's 28 nm low-power process. Typical applications include industrial machine vision and inspection, motor control and servo drives, factory automation PLCs, video surveillance and broadcast equipment, medical imaging, and small-cell wireless infrastructure. The combination of deterministic ARM processing with FPGA-based hardware acceleration makes the 5CSEBA6U23C7N especially attractive for latency-sensitive embedded designs that require both complex control software and parallel DSP pipelines. When designing with this device, engineers should pay close attention to the multi-rail power sequencing requirements (1.1V core, 2.5V/3.3V I/O, PLL analog supply) and to the DDR3 interface pin assignments, which are tightly constrained by the U23 package variant. Quartus Prime design software with the SoC EDS toolkit is required for hardware/software co-development. This page synthesizes distributor pricing, same-package drop-in alternatives from the Cyclone V SE family, and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop resource for evaluating the 5CSEBA6U23C7N.

USD $185,00 Auf Lager

5CSEBA6U23C7SN

5CSEBA6U23C7SN - Cyclone V SE SoC FPGA 110K LE | Intel

The Intel 5CSEBA6U23C7SN is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a single ARM Cortex-A9 MPCore with CoreSight debug up to 925 MHz together with 110K Logic Elements and 41,910 Adaptive Logic Modules in a 672-pin UBGA (23x23 mm) package. Per the manufacturer listing, the device belongs to the 5CSEA6 (U23) speed/power grade and ships in a 27 mm x 27 mm body with 145 user I/Os, 3.125 Gbps transceivers, and 5 Mbits of embedded memory. An SoC FPGA is a single silicon device that combines a hard ARM processor subsystem (HPS) with programmable logic on the same die. This class of component sits in the hierarchy: SoC -> SoC FPGA -> FPGA & SoC -> programmable logic -> semiconductor. The HPS enables deterministic, software-driven control while the FPGA fabric accelerates parallel datapath processing - a combination that is impossible to replicate with separate MCU + FPGA two-chip designs at the same power and latency. Key features include a single-core ARM Cortex-A9 with 32 KB each of L1 instruction and data cache, NEON media engine, and CoreSight debug, plus hard memory controllers (DDR2/3, LPDDR2), peripheral IP (USB 2.0 OTG, Ethernet MAC, SPI, I2C, UART, SD/SDIO/MMC), and 3.125 Gbps LVDS transceivers. The FPGA fabric adds 41910 ALMs, 5 Mb embedded RAM, 174 DSP blocks, and 6 PLLs for clock management. Cyclone V SE SoC FPGAs are built on TSMC's 28 nm low-power process and target cost- and power-sensitive embedded systems. The integrated transceivers simplify PCIe Gen2 and serial RapidIO interfaces, while the hard ARM subsystem replaces discrete processors in motor control, industrial vision, and protocol bridging applications. Power consumption is typically 30-50% lower than two-chip MCU+FPGA solutions at equivalent throughput. Typical applications include industrial motor drives, factory automation controllers, machine vision pre-processors, software-defined radio (SDR) baseband, video surveillance, smart grid RTUs, medical imaging pre-processing, and embedded vision for UAVs. The 672-UBGA package supports extended temperature operation (-40C to +100C junction) with industrial-grade reliability. When designing with the 5CSEBA6U23C7SN, allocate the ARM HPS for control-plane tasks (OS, networking, housekeeping) and the FPGA fabric for data-plane acceleration (DSP, video pipelines, custom protocols). Decouple the HPS and FPGA clock domains and use the system interconnect (AXI bridges) for high-bandwidth data movement between them. This page consolidates distributor pricing, package-level pin compatibility, and practical HPS/fabric partitioning guidance beyond what the manufacturer datasheet alone provides.

USD $410,00 Auf Lager

5CSEBA6U23C8N

5CSEBA6U23C8N - Cyclone V SE SoC FPGA, 110K LE, Dual-A9, 672-UBGA | Intel

The Intel 5CSEBA6U23C8N is a Cyclone V SE System-on-Chip (SoC) FPGA integrating a hard dual-core ARM Cortex-A9 MPCore processor subsystem with CoreSight debug and a 110K-logic-element FPGA fabric in a single 672-pin UFBGA (23x23 mm) package. The device pairs an 800 MHz dual-core Cortex-A9 hard processor system (HPS) with up to 110K logic elements, 224 DSP blocks, and 6.144 Mbits of embedded memory, fabricated on TSMC's 28 nm low-power process. This combination targets applications requiring deterministic real-time control alongside flexible programmable logic on a single die. What is a Cyclone V SE SoC FPGA? A SoC FPGA is an integrated circuit that combines a hard processor system (typically ARM Cortex-A cores) with a traditional FPGA fabric on the same silicon die. The Cyclone V family is Intel's (formerly Altera's) mid-range, low-power 28 nm SoC FPGA line; the 'SE' variant pairs the Cortex-A9 HPS with the smaller Cyclone V E FPGA fabric, while 'SX' adds transceivers. Within the broader taxonomy: SoC FPGA -> FPGA -> programmable logic -> semiconductor device. This architecture lets designers partition deterministic control and software stacks onto the ARM cores while accelerating parallel datapath operations in FPGA fabric, reducing board area, BOM cost, and processor-to-FPGA interconnect latency compared with a discrete processor-plus-FPGA design. Key differentiating specifications include: 110K logic elements, 6.144 Mbits embedded RAM, 224 variable-precision DSP blocks, two ARM Cortex-A9 cores with NEON media engine, single-precision floating-point unit, and CoreSight debug. The 672-UBGA package measures 23x23 mm and uses Intel's industrial-grade -40C to +85C operating range. The HPS includes standard peripherals - USB 2.0 OTG, Gigabit Ethernet MAC, DDR3 controller, SD/SDIO/MMC, UART, SPI, I2C, and CAN - reducing the need for external companion chips. The 28 nm low-power process gives the Cyclone V SE family a static power profile typically half of the prior-generation Cyclone IV family, while the HPS integrates seamlessly with the FPGA fabric through AXI bridges supporting 32-bit and 64-bit transactions. Hard memory controllers offload DDR3/LPDDR2 access from soft logic, freeing fabric resources for application logic. Typical applications include industrial motor control, factory-automation controllers, machine-vision pre-processing, multi-axis motion control, video surveillance, automotive driver-assist pre-processing, and embedded vision systems requiring both a Linux-capable application processor and parallel pixel-pipeline acceleration. The combination of deterministic ARM Cortex-A9 cores and 110K logic elements suits mid-complexity edge-compute nodes. Design consideration: the 672-UBGA package requires multilayer PCB stack-up with microvia or via-in-pad technology; designers should follow Intel's Cyclone V SE pin connection guidelines to properly configure unused transceiver and HPS pins, and budget carefully between HPS-side DDR3 ECC overhead and FPGA-side logic utilization. This page synthesizes distributor pricing, parametric alternatives within the same Cyclone V SE family, and PCB-layout design notes drawn from Intel's official device handbook - context that a single datasheet PDF does not aggregate.

USD $132,00 Auf Lager

5CSEBA6U23C8SN

5CSEBA6U23C8SN - Cyclone V SE SoC FPGA, 110K LE, ARM Cortex-A9 | Intel

The Intel 5CSEBA6U23C8SN is a Cyclone V SE family System-on-Chip FPGA integrating a single ARM Cortex-A9 MPCore hard processor subsystem with CoreSight debug plus 110,000 logic elements of FPGA fabric, housed in a 672-ball UBGA (23x23 mm) package. The device combines a 32-bit application processor class HPS running up to 600 MHz, dual ARM Cortex-A9 cores, L1/L2 caches, and a rich set of peripherals with a low-power FPGA fabric offering 224 DSP blocks, 4.45 Mbits of embedded memory, and variable-precision DSP support. What is a SoC FPGA? A SoC FPGA combines a hard processor subsystem (typically ARM Cortex-A) with FPGA fabric on a single die. The HPS handles deterministic boot, OS run-time, and high-speed peripheral interfacing while the FPGA implements custom accelerators, glue logic, and parallel datapaths. SoC FPGAs sit at the top of the embedded computing hierarchy, above discrete MCU+FPGA dual-chip solutions and below pure ASICs. The Cyclone V SE SoC uses TSMC's 28 nm low-power process, providing the fabric and HPS at a fraction of the static power of previous 40 nm Cyclone generations. The HPS integrates 10/100/1000 Ethernet MAC, USB 2.0 OTG, NAND flash controller, DDR2/DDR3 memory controller with ECC, and SD/MMC interfaces. The FPGA fabric supports up to 364 18x18 multipliers for variable-precision DSP, distributed and M10K block RAM, and up to 17 LVDS channels at 875 Mbps. Configuration is via fast passive parallel (FPP) or active serial (AS) flash with built-in decompression. Typical applications include industrial machine vision, motor control drives, broadcast video processing, factory automation controllers, and portable medical instrumentation. The dual ARM cores support Linux or RTOS run-time while the FPGA fabric accelerates pixel pipelines, sensor aggregation, or signal processing tasks. Hardened peripherals offload deterministic I/O from the cores, reducing jitter in real-time control loops. Design consideration: pin-muxing between HPS peripherals and FPGA I/O must be planned in early system design because HPS balls are dedicated while FPGA balls are user-assignable. Quartus Prime pin planner should be used to validate ball assignments before PCB fabrication to avoid costly respins. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for procurement and design decisions.

USD $1.420,00 Auf Lager

5CSEBA6U23I7LN

5CSEBA6U23I7LN - Cyclone V SE SoC FPGA 110K LE Dual ARM A9 | Intel

The Intel 5CSEBA6U23I7LN is a Cyclone V SE System-on-Chip (SoC) FPGA integrating 110K logic elements of FPGA fabric with a hard dual-core ARM Cortex-A9 MPCore processor subsystem running up to 925 MHz, all housed in a 672-pin UBGA (UBG-672) package measuring 23x23 mm. It combines programmable logic with a hardened ASIC-style processor complex, enabling deterministic real-time control alongside rich operating-system workloads on a single die. A System-on-Chip FPGA (SoC FPGA) is a heterogeneous computing device that fuses a general-purpose processor subsystem with a programmable FPGA fabric on the same silicon. The processor subsystem typically executes high-level OS stacks such as Linux while the FPGA fabric accelerates parallel, deterministic, or interface bridging tasks. Compared with a discrete CPU + standalone FPGA pair, an SoC FPGA reduces board area, lowers latency between the two domains, and provides coherent shared-memory access through a high-bandwidth interconnect. The Cyclone V SE family sits in Intel's mid-range low-power SoC FPGA portfolio, optimized for industrial, motor control, and video/imagery pipelines. Key features of the 5CSEBA6U23I7LN include approximately 110K logic elements, embedded hard memory blocks, variable-precision DSP blocks, and a dual ARM Cortex-A9 MPCore subsystem with NEON media engine and single/double-precision FPU. The hard processor system includes peripherals such as Gigabit Ethernet, USB 2.0 OTG, CAN, SPI, I2C, UART, and SD/SDIO controllers. The 925 MHz CPU frequency quoted by distributors refers to the maximum ARM core clock; FPGA fabric performance is governed by logic-element count, DSP blocks, and memory bandwidth rather than a single MHz figure. Architecturally, the device couples an FPGA fabric built on a low-power process with a separate ARM subsystem that communicates via a 32-bit or 64-bit AMBA AXI bridge. This allows Linux or RTOS workloads on the Cortex-A9 side to control DMA streams that are processed in real time by the FPGA fabric, a common pattern in machine vision and industrial Ethernet gateways. Typical applications include industrial motor control, machine vision, video surveillance, factory automation gateways, smart energy / smart grid edge nodes, and portable medical imaging pre-processing. The integrated ARM cores run the user interface and networking stack while the FPGA fabric handles high-throughput sensor interfaces and deterministic control loops. Designers should evaluate power-rail sequencing, thermal dissipation on the 672-ball BGA, and the JTAG/AS configuration mode (the I7 speed grade and LN suffix denote industrial temperature range and lead-free packaging). Quartus Prime is the supported design toolchain for both HDL synthesis and the SoC EDS for software development. This page synthesizes distributor pricing from DigiKey, Mouser, Heisener and Octopart, enumerates same-family and cross-brand drop-in SoC FPGA alternatives, and provides PCB layout and thermal design notes beyond the data the manufacturer datasheet alone surfaces.

USD $184,83 Auf Lager

5CSEBA6U23I7N

5CSEBA6U23I7N - Cyclone V SE SoC, 110K LE, Dual A9, 672-UBGA | Intel

The Intel (Altera) 5CSEBA6U23I7N is a Cyclone V SE system-on-chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with a Cyclone V SE FPGA fabric (110,000 logic elements) in a 672-ball UBG A package (23x23 mm), speed grade 7, industrial temperature range. The device combines an 800 MHz Cortex-A9 subsystem with CoreSight debug, 110K FPGA logic elements, and Cyclone V variable-precision DSP blocks, all fabricated on TSMC's 28 nm low-power process at 1.1 V core. The SoC integrates peripheral controllers, ECC-capable L1/L2 caches, and a high-bandwidth FPGA-to-HPS (Hard Processor System) interconnect using ARM CoreLink coherency fabric. An SoC FPGA (System-on-Chip Field Programmable Gate Array) is a hybrid device that merges a general-purpose application processor subsystem with programmable logic on a single die, enabling hardware/software co-design. Cyclone V SE SoC FPGAs target low-power, cost-sensitive embedded applications where deterministic real-time response, on-chip signal processing, and Linux-capable application processing must coexist on one chip - useful in industrial motor control, video analytics, and communications infrastructure. Key specifications include 110K logic elements, 224 DSP blocks (variable-precision), approximately 5.5 Mbits of embedded memory (M10K + MLAB), a dual-core Cortex-A9 MPCore at up to 800 MHz, 32-bit DDR3/LPDDR2 controller with ECC, and integrated transceivers not present on this SE variant. The device supports 364 maximum user I/Os across various I/O standards including LVDS, LVCMOS, SSTL, and HSTL. The 5CSEBA6U23I7N ships in the UBG A-672 (23x23 mm) wire-bond package and is specified over the industrial -40C to +100C junction temperature range. The 'I7' suffix decodes as industrial temperature grade (I) and speed grade 7; 'N' indicates lead-free / RoHS-compliant Pb-free assembly. Designers select this OPN when their board requires the full industrial SoC feature set with the fastest available speed grade and 800 MHz HPS operation. Typical applications include industrial machine vision and video analytics, factory automation controllers, broadcast and professional video processing, automotive driver assistance prototypes, software-defined radio baseband processing, and embedded Linux compute platforms with FPGA-accelerated I/O. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart and LCSC, drop-in alternatives from the same Cyclone V SE family, and practical design notes not found in the manufacturer datasheet.

USD $51,80 Auf Lager

5CSEBA6U23I7NTS

5CSEBA6U23I7NTS - Cyclone V SE SoC FPGA, 110K LE, 925MHz, 672-UBGA | Intel

The Intel (formerly Altera) 5CSEBA6U23I7NTS is a Cyclone V SE family System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor subsystem with CoreSight debug, paired with 110K logic elements of low-power 28nm FPGA fabric, housed in a 672-pin UBGA (23x23 mm) package. The SoC integrates up to 925 MHz processor performance, hardware Floating Point Unit, NEON SIMD media engine, and 32 KB instruction/32 KB data Level-1 caches plus 512 KB shared L2 cache, while the FPGA fabric provides up to 110K logic elements, 4.45 Mbits of embedded memory, and 224 18x18 multipliers for DSP acceleration. An SoC FPGA is a heterogeneous compute device that combines a general-purpose applications processor (the Hard Processor System, or HPS) with programmable logic on a single die, connected by high-bandwidth bus interfaces. The HPS runs an operating system (typically Linux, VxWorks, or RTOS) and handles networking, storage, and user interfaces, while the FPGA fabric implements hardware-accelerated datapaths, custom peripherals, and high-speed interfaces. SoC FPGAs bridge the gap between traditional microcontrollers (which lack parallel hardware processing) and standalone FPGAs (which lack native OS-capable processors), enabling designs that require both deterministic hardware acceleration and rich software stacks in industrial, automotive, and vision applications. Key features of the 5CSEBA6U23I7NTS include dual ARM Cortex-A9 cores with NEON/FPU, 925 MHz maximum HPS clock, 110K LE FPGA fabric, 4.45 Mbits embedded SRAM, 224 18x18 multipliers, integrated transceivers, 3.125 Gbps memory controllers supporting DDR2/DDR3/LPDDR2, hardened PCIe Gen2 controller, and 12 HPS peripheral controllers including USB 2.0, Gigabit Ethernet, SD/MMC, UART, SPI, and I2C. The device supports commercial (0C to 85C), industrial (-40C to 100C), and automotive temperature grades depending on ordering code suffix. The 5CSEBA6U23I7NTS implements the SE variant of the Cyclone V SoC family, meaning it includes the FPGA fabric plus HPS with transceiver support, targeting industrial motor control, video surveillance, broadcast equipment, and machine vision. Power consumption is optimized through Altera's SmartVoltage ID and hard ASIC blocks, providing high functionality per watt compared with previous-generation Cyclone IV SoCs. Typical applications include industrial machine vision cameras, broadcast video processing, factory automation controllers, medical imaging equipment, automotive driver assistance systems, and software-defined radio platforms. The combination of ARM Cortex-A9 for OS-level processing and FPGA logic for parallel DSP makes the device particularly suitable for image pipeline implementations where pixel-rate processing benefits from hardware acceleration. When designing with this device, allocate HPS-to-FPGA bridge bandwidth carefully using the 32-bit or 64-bit AXI bridges. Pinout and package are 672-UBGA; the U23 designation specifies 23x23 mm body, while suffix -I7 denotes industrial temperature grade and -NTS denotes tray packaging without tape-and-reel. The SoC requires multiple voltage rails (typically 1.1V core, 1.8V/2.5V/3.3V I/O) and proper sequencing per Intel Cyclone V handbook recommendations. This page synthesizes distributor stock and pricing, drop-in same-family alternatives, and design notes not consolidated on the manufacturer product page, giving engineers a single reference for BOM selection and supply-chain risk assessment.

USD $213,52 Auf Lager

5CSEBA6U23I7SN

5CSEBA6U23I7SN - Cyclone V SE SoC FPGA 110K LE | Altera

The Altera 5CSEBA6U23I7SN is a Cyclone V SE System-on-Chip (SoC) FPGA that integrates a single ARM Cortex-A9 MPCore hard processor subsystem with CoreSight debug fabric alongside an FPGA fabric of 110,000 logic elements, packaged in a 672-pin UBGAsize-23 mm. According to Altera/Intel Cyclone V family documentation, this device is built on TSMC's low-power 28 nm process and combines a hard CPU subsystem with programmable logic to deliver a balance of functionality, flexibility, and power efficiency for embedded and industrial designs. A SoC FPGA is a class of programmable device that fuses a fixed-function application processor (in this case ARM Cortex-A9) with general-purpose FPGA fabric. The hard CPU subsystem executes the operating system and control plane deterministically, while the FPGA fabric accelerates parallel datapaths, custom peripherals, and DSP. Compared with a discrete CPU-plus-FPGA two-chip solution, a SoC FPGA reduces board area, lowers inter-chip latency, and removes the FPGA-to-CPU bus bottleneck. Within Altera's portfolio, the Cyclone V SE family sits in the low-power, cost-optimized tier above the Cyclone IV family and below the Arria V/10 families. Key features of the 5CSEBA6U23I7SN include approximately 41,910 adaptive logic modules (ALMs), 5.7 Mbits of embedded memory, integrated variable-precision DSP blocks, and a maximum Cortex-A9 core frequency of 925 MHz with FPGA fabric speed grade -7. The SoC integrates peripherals such as Ethernet MAC, USB 2.0, NAND flash controller, DDR3/3L memory controller, and CoreSight debug. Per Cyclone V datasheet CV-5V SE family specifications, the device supports commercial and industrial junction temperature grades and is offered in the U23 672-pin UBGA package. Architecturally, the hard processor system (HPS) contains the dual-issue ARM Cortex-A9 MPCore, NEON media engine, single/double-precision FPU, 32 KB L1 instruction and 32 KB L1 data caches per core, and a coherent 512 KB L2 cache shared across cores. The HPS connects to the FPGA fabric via high-bandwidth AXI bridges, allowing user logic to act as a custom peripheral or coprocessor to the processor. Variable-precision DSP blocks accelerate fixed- and floating-point arithmetic, enabling efficient FFT, FIR, and matrix operations used in motor control, video processing, and signal acquisition. Typical applications include industrial motor control and factory automation drives, machine vision and video surveillance pipelines, portable medical instrumentation, automotive driver-assist pre-processing, software-defined radio baseband, and embedded HMI panels. In each case the ARM cores handle the OS, networking, and user interface while the FPGA fabric runs time-critical data acquisition or DSP. The 110K LE size targets mid-range designs where cost per logic element matters. Design considerations include planning power-rail sequencing for the HPS and FPGA domains (often separate 1.1 V core supplies), DDR3 PCB layout for the HPS memory controller, and ensuring thermal dissipation at industrial temperatures. Quartus Prime toolchain support is required; designers should consult the Cyclone V SE device handbook for HPS peripheral pin multiplexing and EMIF IP configuration. This page synthesizes distributor pricing, drop-in Cyclone V SE variants, and practical design considerations beyond the manufacturer's ordering guide.

USD $162,40 Auf Lager

Unterkategorien

Produkte (32725)