Mikrocontroller

Produkte (20.000+)

DSPIC33FJ64GS610T-50I/PF - 16-bit 50MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64GS610T-50I/PF

DSPIC33FJ64GS610T-50I/PF - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip DSPIC33FJ64GS610T-50I/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering 50 MIPS performance with 64KB (64K x 8) FLASH program memory and 9KB RAM, housed in a 100-pin TQFP (14x14 mm) surface-mount package. A digital signal controller combines the control flow of a microcontroller (MCU) with the computational throughput of a digital signal processor (DSP) in a single device. Within the power-management hierarchy, a DSC such as the dsPIC33FJ64GS610 sits between a general-purpose MCU and a dedicated digital power IC, executing real-time control loops for switching power supplies and motor drives while also managing housekeeping, communication, and user-interface tasks. Key differentiating features include dedicated SMPS PWM peripherals, 2 quadrature encoder interface (QEI) modules, a CAN 2.0B controller, a 10-bit DAC, and 4 analog comparators, making this one of the few 16-bit controllers purpose-built for digital power conversion. The industrial temperature grade (-40C to +85C, denoted by the I suffix) suits demanding factory and power-infrastructure environments. Architecturally, the dsPIC33F core pairs a 16-bit pipelined CPU with DSP instruction extensions (single-cycle MAC, dual operand fetch), enabling deterministic execution of Proportional-Integral-Derivative (PID) and predictive control loops at loop rates far above what conventional MCUs achieve. High-resolution PWM modules support complementary outputs, dead-time insertion, and fault shutdown - the classic requirements of half-bridge and full-bridge power stages. Typical applications include switched-mode power supplies (SMPS) with active Power Factor Correction, DC-DC converters, digital lighting ballasts, and battery chargers. Microchip's Interleaved PFC reference design, delivering up to 350W from a universal input range, is based directly on this device family. When designing with this part, budget the peripheral pin map early - the 100-pin TQFP provides the port fan-out needed for multiple PWM channels plus CAN and QEI simultaneously, but remappable pin assignment must be planned to avoid routing conflicts. This page synthesizes distributor pricing context, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing references are as of 2026-09-27.

Angebot Kontakt
DSPIC33FJ64GS610T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64GS610T-50I/PT

DSPIC33FJ64GS610T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610T-50I/PT is a 16-bit digital signal controller (DSC) delivering up to 50 MIPS from a dsPIC33F core, with 64KB of FLASH program memory and 9KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated from -40C to +85C at 3.0V to 3.6V operation. A digital signal controller combines the compute throughput of a DSP engine (single-cycle MAC, DSP multiply, hardware divide support) with the deterministic control peripherals of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ64GS610 belongs to Microchip's SMPS-focused family: DSC -> digital signal controller -> 16-bit MCU -> embedded processor, purpose-built to close multi-loop digital control of switch-mode power supplies in software. Key features include a high-speed PWM module with complementary outputs, dead-time insertion and fault protection, a high-speed 10-bit ADC with multiple sample-and-hold circuits able to trigger from the PWM, four analog comparators, two QEI (quadrature encoder interface) modules, a CAN 2.0B controller, and on-chip DAC outputs. These peripherals map directly onto PFC stage, phase-current, and bus-voltage sensing with minimal external circuitry. Architecturally, the 16-bit pipelined core executes C-efficient code with DSP instructions, while the ADC-PWM loop timing in the low hundreds of nanoseconds enables high-bandwidth current-mode control for LLC, half-bridge, and interleaved topologies. Internal fast RC oscillators and PLL allow 50 MIPS operation without an external crystal in cost-sensitive designs. Typical applications include AC-DC converters, DC-DC converters, power factor correction, uninterruptible power supplies, solar inverters, and digital lighting ballasts, where the integrated SMPS peripherals replace discrete analog control loops. Design consideration: the ADC sampling window and PWM dead-time registers must be co-scheduled; use the datasheet trigger scheme to avoid sampling during switching transients. This page synthesizes verified distributor data, drop-in alternatives, and design guidance not found on a single manufacturer or distributor page.

Angebot Kontakt
DSPIC33FJ64GS610T-I/PF - 16-bit DSC 40MIPS 64KB | Microchip
DSPIC33FJ64GS610T-I/PF

DSPIC33FJ64GS610T-I/PF - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS610T-I/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS from 64 KB (64K x 8) of flash memory with 9 KB RAM, housed in a 100-pin TQFP (14x14 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control peripherals of a microcontroller. Within the power-management IC hierarchy, the dsPIC33F GS family occupies the role of a dedicated digital power conversion engine, replacing analog loop control with firmware-executed compensation in switch-mode power supply (SMPS) systems. Key features of this device include dedicated high-resolution SMPS PWM modules, two quadrature encoder interfaces (QEI), a CAN controller, four on-chip comparators, and DAC-based analog comparators tailored for multi-loop power conversion. These peripherals enable AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and uninterruptible power supply (UPS) designs on a single controller. The dsPIC33F core executes an enhanced 16-bit instruction set with DSP instructions, a barrel shifter, four DMA channels, and boundary-scan (JTAG) support for production programming and debugging. In-circuit serial programming (ICSP) uses the PGECx/PGEDx pin pairs, and Microchip recommends keeping ICSP trace lengths short on high-speed power boards. Typical applications include interleaved PFC front ends (Microchip's 350 W universal-input interleaved PFC reference design uses this family), telecom rectifiers, solar micro-inverters, battery chargers, and embedded motor-drive control where deterministic 40 MIPS control loops are required. Design consideration: the -I temperature suffix covers -40C to +85C industrial operation; if extended temperature range to +125C is required, use the -E suffix variant, which shares the same die and TQFP footprint. This page adds value beyond the datasheet by synthesizing distributor pricing across 9 sources, drop-in alternatives within the same 100-TQFP footprint, and practical digital-power design notes not found on the Microchip product page.

Angebot Kontakt
DSPIC33FJ64GS610T-I/PT - 40MIPS 16-bit DSC for Digital Power | Microchip
DSPIC33FJ64GS610T-I/PT

DSPIC33FJ64GS610T-I/PT - 40MIPS 16-bit DSC for Digital Power | Microchip

The Microchip Technology DSPIC33FJ64GS610T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64GS610 SMPS family, delivering up to 40 MIPS of dsPIC core performance with 64KB (64K x 8) of FLASH program memory and 9KB of RAM, housed in a 100-pin TQFP (12x12 mm) surface-mount package operating from a 3.3 V supply across an industrial temperature range of -40C to +85C. A digital signal controller combines the computational throughput of a 16-bit microcontroller with DSP-grade math acceleration, making the dsPIC33F family a staple of digital switch-mode power supply (SMPS) design, where a single chip closes current and voltage control loops in firmware while driving PWM stages directly. Within the power-management semiconductor hierarchy, the DSPIC33FJ64GS610 sits in the digital power conversion segment between general-purpose MCUs and dedicated DSPs. Key features include a high-speed PWM module purpose-built for power conversion, a high-speed 10-bit and 12-bit ADC with simultaneous multi-channel sampling for multi-loop control, and integrated analog comparators for cycle-by-cycle current limiting. The device supports 40 MHz input clocking (40 MIPS operation per Microchip USA product data), and the tape-and-reel (/T) suffix supports automated SMT assembly lines. The architecture pairs the dsPIC33F 16-bit RISC core with DSP multiply-accumulate instructions and hardware loop support, enabling deterministic single-cycle MAC execution that keeps PFC and phase-shifted control loops stable at high switching frequencies. An In-Circuit Serial Programming (ICSP) interface via PGECx/PGEDx pins allows field firmware updates with only two dedicated pins, which Microchip recommends keeping as short traces to the programming connector. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), solar inverters, and battery chargers. The Interleaved PFC reference design from Microchip demonstrates 350 W output from a universal AC input using this controller family. Design consideration: budget the PCB footprint carefully - the 100-pin TQFP (12x12 mm, 0.5 mm pitch) requires controlled-impedance-aware layout for the PWM outputs, and the extended-temperature -E/PT variant is required instead if -40C to +125C ambient is needed. This page synthesizes distributor pricing, drop-in same-family alternatives, applications, and design guidance not found in a single manufacturer source.

Angebot Kontakt
DSPIC33FJ64MC506A-E/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64MC506A-E/MR

DSPIC33FJ64MC506A-E/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC506A-E/MR is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from 64 KB (64K x 8) of Flash program memory, housed in a 64-pin VQFN (9x9 mm, MR) surface-mount package with extended temperature operation. A Digital Signal Controller combines the compute architecture of a microcontroller with the numeric acceleration of a DSP. In the power-management hierarchy, a DSC such as this dsPIC33F device sits above general-purpose MCUs for control loops that need fast multiply-accumulate operations, making it a direct predecessor-friendly member of the broader Microchip 16-bit MCU/DSP portfolio with seamless migration to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features of the dsPIC33FJ64MC506A family include its motor-control-optimized peripherals, an 8-channel DMA engine, 11 timers, 4 serial I/O peripherals, and CAN 2.0B connectivity, all running from a single 3.0V to 3.6V supply. The A-suffix silicon revision adds refinements over the original dsPIC33FJ64MC506 while remaining code-compatible. The core executes modified Harvard instructions with DSP engine support (barrel shifter, 17-bit x 17-bit single-cycle MAC) at 40 MIPS, which is the headroom needed to close field-oriented-control current loops in the tens of microseconds. The internal oscillator with PLL removes the need for an external crystal in many designs, and multiple serial buses (UART, SPI, I2C) plus CAN allow a single chip to run the control loop and the communication stack simultaneously. Typical applications include brushless DC motor drives, single-phase and 3-phase induction motor control, switched reluctance motor drives, uninterrupted power supplies (UPS), and digital power conversion such as PFC and DC-DC stages. A key design consideration: the MR (VQFN-64) package requires careful thermal pad and via design for heat dissipation, and the extended -40C to +125C E-grade rating must be derated against power dissipation at the upper ambient extreme. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with all specifications cross-checked against Microchip and distributor data as of 2026-09-27.

Angebot Kontakt
DSPIC33FJ64MC506A-H/PT - 16-Bit DSC 64KB Flash 64-TQFP | Microchip
DSPIC33FJ64MC506A-H/PT

DSPIC33FJ64MC506A-H/PT - 16-Bit DSC 64KB Flash 64-TQFP | Microchip

The Microchip Technology DSPIC33FJ64MC506A-H/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F Motor Control family, delivering 20 MIPS performance, 64KB (64K x 8) FLASH memory, and 3.3V operation in a 64-pin TQFP (10x10 mm) surface-mount package. A Digital Signal Controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs such as the PIC18 and dedicated DSP chips, offering single-cycle MAC instructions, hardware divide, and DSP engine features while retaining rich peripheral sets, interrupt structures, and flash self-programming typical of modern MCUs. Key features include the 16-bit dsPIC33F core rated at 20 MIPS, 64KB of on-chip flash for code storage, integrated motor-control PWM peripherals, a CAN 2.0B module for industrial networking, and multiple serial interfaces. The 64-TQFP (10x10) package exposes 64 I/O-capable pins suited to three-phase inverter drives with ample GPIO for gate drivers, current-sense amplifiers, and rotary or incremental encoders. Architecturally, the dsPIC33F core pairs a 16-bit pipeline with a dedicated DSP engine supporting MAC and DSP-style addressing, plus fast interrupt context switching important for field-oriented control (FOC) loops. The Motor Control PWM peripheral generates complementary or independent PWM outputs with dead-time insertion, while the high-speed ADC synchronizes sampling to PWM events for low-latency current measurement. Typical applications include brushless DC (BLDC) motor drives, single- and three-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), and power-inverter control, all use cases named directly by Microchip for this family. The CAN interface extends use into automotive-adjacent industrial nodes. Design consideration: this is the -H temperature grade (operating range narrower than the -I industrial grade); confirm ambient conditions or select DSPIC33FJ64MC506A-I/PT for extended temperature environments. Decouple the 3.3V supply per the manufacturer datasheet and use the ECAN/UART bootloaders for field updates. This page synthesizes distributor pricing tiers, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, providing information gain for sourcing and engineering evaluation.

Angebot Kontakt
DSPIC33FJ64MC506AT-I/MR - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC506AT-I/MR

DSPIC33FJ64MC506AT-I/MR - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC506AT-I/MR is a 16-bit dsPIC33F digital signal controller delivering 40 MIPS from 64KB of FLASH program memory, operating at 3.3V and housed in a 64-pin VQFN (9x9 mm) exposed-pad package supplied on tape and reel. A digital signal controller (DSC) is a single-chip device that merges the computational power of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power management hierarchy of embedded systems, DSCs occupy the tier above general-purpose MCUs for control loops, sitting below multi-core application processors. The dsPIC33F family from Microchip implements a modified Harvard, 16-bit RISC architecture with DSP instructions, making it a mainstream choice for real-time control. Key features of this device include a 40 MIPS instruction throughput, 64KB (64K x 8) of self-programmable FLASH, 8KB of data RAM, 11 timers, 8 DMA channels, and 4 serial I/O ports for flexible connectivity. These peripherals allow complex control and signal-processing tasks, such as multi-channel motor control and sensor fusion, to be handled without external logic. The architecture pairs the 16-bit CPU core with dedicated DSP engine hardware supporting multiply-accumulate operations, which is essential for control-law execution such as field-oriented control of PMSM and brushless DC motors. The A-variant silicon integrates the enhanced feature set of the dsPIC33FJ64MC506A family while retaining seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies, and digital power conversion, where deterministic interrupt latency and DSP throughput are required. Designers should note the 3.0V to 3.6V supply range and the -40C to +85C industrial temperature rating of the I suffix; the exposed-pad QFN requires a solid ground connection for thermal and electrical performance. This page synthesizes distributor availability, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet, with pricing referenced as of 2026-09-27.

Angebot Kontakt
DSPIC33FJ64MC508-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64MC508-I/PT

DSPIC33FJ64MC508-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508-I/PT is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS from a 64KB (64K x 8) Flash program memory, housed in an 80-pin TQFP (12 x 12 mm) package with industrial temperature rating of -40C to +85C. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded control, a DSC sits above general-purpose MCUs for control-loop-intensive tasks: the dsPIC33F core executes DSP instructions (MAC, DSP multiply, modulo addressing) that make high-speed digital control loops, digital filters, and digital audio processing practical on a single chip. The dsPIC33FJ64MC508 belongs to the dsPIC33FJXXXMCX06/X08/X10 Motor Control family, which Microchip positions for seamless migration to/from PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features include the 16-bit dsPIC33F core operating at up to 40 MIPS, 64KB of self-programmable Flash, on-chip DSP engine, motor-control-oriented peripherals (PWM and ADC modules), and multiple PGECx/PGEDx pin pairs supporting In-Circuit Serial Programming (ICSP) and in-circuit debugging with tools such as MPLAB SNAP. The part operates from a 3.3V supply per the dsPIC33F family architecture. From a technical standpoint, the dsPIC33FJXXXMCX06/X08/X10 family is designed to execute digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing. The MC (Motor Control) peripheral set in the -MC508 variant provides hardware PWM resources and fast ADC sampling suited to field-oriented control and other servo-loop topologies, while Boundary-Scan (JTAG BSDL) data is published for the 80-pin TQFP package for manufacturing test. Typical applications include brushless DC and permanent-magnet motor drives, digital power supplies (Power Factor Correction, LLC control), inverters and solar converters, and embedded control systems requiring DSP-class math with MCU-class peripherals. Design consideration: the device exposes more than one pair of PGECx/PGEDx programming pins; ICSPCLK and ICSPDAT must be used as a matched pair (e.g., PGEC2 with PGED2), and all VDD/VSS pins must be connected or programming may fail. This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC508AT-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC508AT-I/PT

DSPIC33FJ64MC508AT-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508AT-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS from a 64 KB (64K x 8) FLASH program memory with 8 KB of RAM, supplied in an 80-pin TQFP (12x12 mm, 0.5 mm pitch) surface-mount package rated for -40C to +85C operation. A digital signal controller combines the computational core of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as the dsPIC33F sits between general-purpose MCUs and dedicated DSPs, providing single-cycle MAC and DSP instructions alongside familiar MCU peripherals, making it a bridge product in embedded control semiconductors. Key features include the 16-bit dsPIC33FJ core clocked at up to 40 MIPS, 64 KB of self-programming FLASH, 8 KB of L1 data RAM, 8 DMA channels that move data without CPU intervention, 9 timers, 69 general-purpose I/O pins, and an 18-channel A/D converter supporting 10-bit and 12-bit modes. Communication peripherals include ECAN, I2C, SPI, and UART, enabling integration into industrial networks and multi-chip systems. The device uses a CMOS process and is part of the dsPIC33F Motor Control family, which provides dedicated PWM peripherals and advanced analog integration aimed at real-time control loops. The A/D converter can sample multiple channels concurrently with the PWM units, a topology that suits field-oriented motor control and digital power conversion where ADC sampling must be synchronized to switching events. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motors, uninterruptible power supplies, digital power supplies, solar inverters, and industrial automation nodes that require ECAN networking. Per Microchip's product page, the dsPIC33FJ64MC508A family explicitly targets these motor control and UPS use cases. Design consideration: the dsPIC33FJ64MC508A operates from a 3.0 V to 3.6 V supply, so level shifting is required when interfacing with 5 V logic; decouple VDD/VDDCORE per the manufacturer datasheet and take advantage of the tape-and-reel (-T) suffix for automated assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, adding selection guidance beyond standard catalog listings.

Angebot Kontakt
DSPIC33FJ64MC508T-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC508T-I/PT

DSPIC33FJ64MC508T-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508T-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS from a modified Harvard dsPIC core, with 64KB (64K x 8) of FLASH program memory, 8KB of RAM, and an 80-pin TQFP (12x12 mm) surface-mount package. It operates from a 3V to 3.6V supply across an industrial -40C to +85C temperature range. A digital signal controller combines the deterministic architecture and peripherals of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, a DSC such as the dsPIC33F family member is a single-chip embedded processor that closes high-speed control loops - for example running field-oriented control of motors - that conventional 8-bit MCUs cannot execute fast enough or with sufficient numerical precision. Key features include the 40 MIPS core executing up to 80 million MAC operations per second, motor-control PWM peripherals with complementary outputs and dead-time insertion, multiple 10-bit ADCs, UART/SPI/I2C communication ports, and a phase-locked loop (PLL) clock system that generates 40 MIPS operation from a low-cost crystal. The FLASH program memory supports in-circuit serial programming (ICSP) and self-programming for field updates. Technically, the device pairs the dsPIC33F 16-bit CPU with dedicated DSP instructions (40-bit wide accumulators, dual operand fetch) and single-cycle multiply, enabling real-time control bandwidths in the tens of kilohertz. Code is pin-compatible and source-compatible across the dsPIC33FJ64MC50x family, and Microchip documents seamless migration to PIC24 MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC), single/three-phase induction and switched-reluctance motor control, digital power supplies (power factor correction, LLC converters), solar inverters, and industrial motion-control systems where the on-chip high-resolution PWM and fast ADC are directly matched to the control problem. A key design consideration: the core supply is internally regulated, so the VCAP pin requires the specified low-ESR capacitor close to the pin for stable operation, and all VDD/VSS pairs must be decoupled individually. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC510A-E/PF - 16-bit 40 MIPS DSC 64KB | Microchip
DSPIC33FJ64MC510A-E/PF

DSPIC33FJ64MC510A-E/PF - 16-bit 40 MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC510A-E/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC510A motor-control family, delivering 40 MIPS of core performance with 64KB (64K x 8) of flash program memory and 8192 words of RAM, housed in a 100-pin TQFP (14x14 mm, PF) package rated from -40C to +125C. A digital signal controller combines the deterministic control of a microcontroller unit (MCU) with the math throughput of a digital signal processor (DSP) on a single die. In the power-management hierarchy, the dsPIC33F sits between general-purpose MCUs (such as PIC18) and standalone DSPs, offering MCU-class peripherals with DSP-class multiply-accumulate (MAC) instructions for real-time control loops. Key features include 2 CAN 2.0B modules, 4 UART ports, 2 SPI and 2 I2C peripherals, 8-channel DMA, and 9 timers, alongside a high-speed motor-control PWM (MCPWM) module purpose-built for field-oriented control. An on-chip 12-bit ADC with multiple sample-and-hold inputs supports simultaneous multi-phase current sampling at motor-loop rates. The device executes the modified Harvard dsPIC33F core at 40 MIPS from an internal PLL, with single-cycle MAC and DSP multiply instructions enabling FOC, PID, and sensorless estimation algorithms in tight control-loop timing budgets. Typical applications include brushless DC (BLDC) motors, single- and 3-phase induction motors, switched reluctance motors, uninterruptible power supplies (UPS), and automotive AEC-Q100-qualified traction and pump-control nodes. When designing with the -E variant, remember the extended temperature rating allows full-speed operation at 125C ambient; keep the 3.3V rail within 3.0-3.6V and decouple all VDD/VSS pairs, including the core regulator connections, per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33FJ64MC510A family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC510AT-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC510AT-I/PF

DSPIC33FJ64MC510AT-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510AT-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC510A Motor Control family, delivering 40 MIPS performance, 64KB (64K x 8) of FLASH program memory and 8KB of RAM in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) package. A digital signal controller combines the compute power of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a standalone DSP: it executes math-intensive control loops (PID, field-oriented control) while handling communication, timing and I/O tasks on a single chip. The dsPIC33F family uses a modified Harvard, C compiler-optimized 16-bit core with DSP engine support. Key features include a 16-bit dsPIC33F core running at up to 40 MIPS, CAN 2.0B, I2C, SPI, UART/USART and IrDA/LINbus connectivity, 8 DMA channels for low-CPU-overhead data movement, and 9 timers for motor control and measurement tasks. Multiple PWM-capable outputs make the MC (Motor Control) variant well suited to power electronics. The device is fabricated in CMOS technology and integrates the DSP multiply-accumulate (MAC) class instructions needed for sensorless motor algorithms and digital power conversion. The 100-pin TQFP exposes a large peripheral set, allowing one chip to drive inverter stages, handle CAN networking, and service host communication simultaneously. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motors, uninterruptible power supplies, digital power supplies, and industrial automation nodes requiring CAN connectivity. Design consideration: the dsPIC33FJ64MC510A family offers seamless migration to PIC24 MCUs and dsPIC30F DSCs, so design the PCB with flash-size headroom in mind - a 256KB variant in the same footprint allows firmware growth without respin. This page synthesizes distributor pricing, drop-in alternatives, comparison data and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC510AT-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC510AT-I/PT

DSPIC33FJ64MC510AT-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510AT-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33F Motor Control family, delivering 40 MIPS performance, 64KB of program flash memory, and 8KB of data RAM in a 100-pin TQFP (12x12 mm) package, operating from a 3.0V to 3.6V supply over an industrial -40C to +85C temperature range. A digital signal controller is a hybrid device that merges the deterministic interrupt latency and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, the DSC sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, making it the preferred controller class for closed-loop control systems such as motor drives and switching power supplies where both fast math and rich peripherals are required. Key features include a 16-bit modified Harvard architecture with a DSP instruction set (40-bit wide accumulators, single-cycle MAC, dual operand fetch), 8 DMA channels for data-intensive peripheral transfers, 9 timers, and 4 serial I/O ports. The motor-control periphery includes dedicated PWM modules with complementary outputs, dead-time insertion, and ADC with simultaneous multi-channel sampling, which are essential for field-oriented control of three-phase motors. The device executes at up to 40 MIPS from an internal fast RC oscillator with PLL or an external crystal, eliminating the need for precision clock components in many cost-sensitive drives. Flash program memory is rated for in-circuit self-programming, allowing firmware field updates and bootloader deployment. The CMOS process yields low active power consumption, and a wide operating voltage window of 3.0V to 3.6V tolerates noisy industrial supply rails with simple 3.3V regulation. Typical applications include brushless DC (BLDC), permanent-magnet synchronous (PMSM), single and 3-phase induction, and switched reluctance motor control; digital power supplies such as LLC and totem-pole PFC stages; solar inverters; and uninterruptible power supplies. The dedicated motor-control PWM and fast ADC make this part especially well suited to sensorless FOC algorithms executing at 10-20 kHz control-loop rates. For design, budget the ADC sampling to align with the PWM period trigger to minimize jitter, and place the controller within a few centimeters of gate drivers to keep PWM edges clean. The TQFP-100 offers 85 general-purpose I/O, providing headroom for communication, protection, and sensing functions on one footprint. This page synthesizes distributor availability, drop-in same-package alternatives, comparison data, and practical design guidance not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC510T-I/PF

DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC510T-I/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance, with 64KB (64K x 8) of FLASH program memory, housed in a 100-pin TQFP (14 x 14 mm) package rated for -40C to +85C industrial operation. A digital signal controller combines the compute architecture of a microcontroller (MCU) with the mathematical acceleration of a digital signal processor (DSP). The dsPIC33F family sits within Microchip's 16-bit portfolio, above the PIC18 8-bit MCUs and alongside PIC24 MCUs, which share the same core. This makes the DSC category ideal for control loops that need fast multiply-accumulate operations, such as field-oriented motor control and digital power conversion. Key features include the 16-bit dsPIC core with dedicated 16x16 hardware multiplier and hardware division support, 40 MIPS execution from an internal PLL, 64KB self-programmable FLASH, and a rich peripheral set including motor-control PWM and multiple serial ports. The dsPIC33FJ64MC510A variant documents 8 DMA channels, 9 timers, and 8192 words of RAM in the same 100-pin TQFP (S-PQFP-G100, 0.50 mm pitch) outline, illustrating the family's peripheral density. Architecturally, the dsPIC33F CPU incorporates hardware support for both multiplication and division, per the dsPIC33F Family Reference Manual (DS70165E), with a modified Harvard architecture that enables deterministic single-cycle MAC execution. Flash self-programming supports field firmware updates, and seamless migration paths exist to PIC24 MCUs and dsPIC30F devices. Typical applications center on motor control: brushless DC (BLDC) motors, single- and three-phase induction motors, and switched reluctance motors, as well as digital power supplies, uninterruptible power supplies (UPS), and industrial automation nodes where deterministic 40 MIPS control loops are required. When designing with this DSC, connect all VDD and VSS pins; per Microchip documentation, programming can fail if any power pin is left unconnected. ICSP programming requires a matched PGECx/PGEDx pair. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in a single manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip
DSPIC33FJ64MC706AT-I/MR

DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC706AT-I/MR is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance with 64KB (64K x 8) of Flash program memory, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from a 3V to 3.6V supply and integrates MCU control with DSP capability in a single core. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the embedded hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC18 family) and dedicated DSPs, making it a power management IC-class solution for real-time closed-loop systems that need both fast multiply-accumulate operations and rich peripherals. Key features include 40 MIPS maximum core speed, 64KB self-programming Flash, 53 general-purpose I/O pins, and communication peripherals including ECAN, I2C, SPI, and UART as listed by distributor Newark. The device supports industrial temperature operation (-40C to +85C, denoted by the I suffix) and ships in tape-and-reel packaging (T/R) for automated assembly. Architecturally, the dsPIC33F core pairs a 16-bit modified Harvard CPU with DSP engine instructions, enabling single-cycle MAC operations used in field-oriented motor control, digital power conversion, and filtering. The A-version family devices are Microchip's refreshed silicon of the dsPIC33FJ64MC706 line. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, and switched reluctance motor systems, as stated by Microchip on the dsPIC33FJ64MC706A product page, plus digital power supplies and industrial sensing nodes. Design consideration: the 64-VQFN exposed-pad package requires a well-designed ground via array under the thermal pad to achieve reliable solder joints and low-impedance grounding at 40 MIPS switching activity. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-E/PT

DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory, 16KB of RAM, and 85 general-purpose I/O pins in a 100-pin TQFP (12x12 mm) package. It operates from a 3V to 3.6V supply and across the extended automotive temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting within the power-management and motor-control hierarchy of embedded processors. The dsPIC33F family merges a 16-bit modified Harvard architecture with DSP engine instructions, making it a middle tier between general-purpose MCUs and standalone DSPs. Key features include the 24-channel 10-bit/12-bit ADC capable of simultaneous multi-channel sampling, the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, multiple UART, SPI, and I2C communication ports, and AEC-Q100 automotive qualification signified by the -E temperature suffix. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS, with hardware multiply, divide, and barrel shifter supporting control-loop mathematics such as field-oriented control (FOC). The A-silicon revision improves errata over the original dsPIC33FJ64MC710 die, and Microchip documents seamless migration paths to PIC24F/PIC24H MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), power inverters, and digital power conversion, where fast ADC sampling synchronized to the PWM module is essential. When designing with this DSC, pair the PWM dead-time settings with gate-driver propagation delays and verify ADC sampling windows against the switching frequency; the 3.0-3.6V supply range requires a dedicated LDO or buck regulator on 5V industrial buses. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, providing a single citable reference for engineers evaluating the dsPIC33FJ64MC710A-E/PT.

Angebot Kontakt
DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-I/PF

DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-I/PF is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance from 64KB of flash memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) package with industrial temperature rating (-40C to +85C) and AEC-Q100 automotive qualification. A Digital Signal Controller combines the computational throughput of a DSP engine with the peripheral integration and deterministic interrupt architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution that executes both C-based control code and math-intensive loops such as PID and field-oriented control. Key features include a modified Harvard architecture with a 16-bit RISC core, 40 MHz maximum operating frequency (40 MIPS), dedicated DSP engine with 17-bit x 17-bit single-cycle MAC, two 40-bit accumulators, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The A revision (suffix A) adds enhanced peripherals and improved electrical characteristics over the original dsPIC33FJ64MC710. Technical depth: the device integrates motor-control-oriented peripherals including a motor control PWM module with complementary outputs and dead-time control, multiple UART, SPI and I2C ports, a CAN 2.0B controller, a high-speed 10-bit ADC capable of simultaneous multi-channel sampling, and an internal fast RC oscillator for crystal-less operation. Operating supply range is 3V to 3.6V (3.3V nominal). Typical applications include brushless DC (BLDC) motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies (UPS), and digital power conversion where the CAN bus supports automotive and industrial networking. Design consideration: at 40 MIPS, ensure adequate decoupling on every VDD/VSS pair and route the PWM outputs with dead-time margins verified against gate driver propagation delays. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip
DSPIC33FJ64MC710AT-I/PF

DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710AT-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC710A family delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm, PF) package rated from -40C to +85C. A digital signal controller combines the computational power of a DSP with the peripheral integration and control architecture of a microcontroller, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP chip. DSCs are optimized for control loops that need fast multiply-accumulate operations, such as field-oriented motor control, digital power conversion, and sensor signal processing. Key features include the dsPIC 16-bit core running at 40 MIPs, 8-channel DMA for low-CPU-overhead data movement, 9 timers, and 4 dedicated serial I/O ports. Connectivity is extensive: CANbus, I2C, IrDA, LINbus, SPI, and UART/USART interfaces cover automotive networking, industrial field buses, and general serial links. The CMOS process keeps power draw reasonable at full clock speed. Architecturally, the dsPIC33F core pairs a pipelined 16-bit MCU datapath with DSP-engine instructions (MAC, dual operand fetch), enabling deterministic single-cycle multiply-accumulate within the control ISR. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP); PGEC2 must be paired with PGED2 when used for ICSPCLK/ICSPDAT. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motor systems, digital power supplies, and CAN-networked industrial nodes - exactly the use cases Microchip targets with the dsPIC33FJ64MC710A family. Design-wise, plan pin selection early: because multiple PGECx/PGEDx pairs exist, choose one pair and route it to the programming header during layout to avoid costly respins. This page synthesizes distributor pricing data, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip
DSPIC33FJ64MC804-I/ML

DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804-I/ML is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPs performance with 64KB Flash and 16KB SRAM in a 44-QFN (8x8 mm) exposed-pad package operating from 3V to 3.6V. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above a general-purpose MCU in math throughput and below a standalone DSP in raw floating-point capability, making it the preferred class for closed-loop control where high-speed repetitive computation must coexist with rich on-chip analog and PWM peripherals. Key features of the DSPIC33FJ64MC804 include the dsPIC33F 16-bit core running at 40 MIPs, 64KB (64K x 8) of Flash program memory, a dedicated Motor Control PWM module, and advanced analog peripherals. The industrial temperature grade (-40C to +85C, denoted by the -I suffix) supports harsh environments, and supply operation from 3V to 3.6V matches standard 3.3V rails. The dsPIC33F architecture provides a modified Harvard bus with DSP multiply-accumulate instructions, enabling single-cycle MAC operations essential for FOC (field-oriented control), digital filters, and sensor fusion. The MC804 variant targets the Motor Control sub-family, whose complementary PWM outputs and dead-time control simplify three-phase inverter designs. Per the Microchip product page, the dsPIC33F family is pin compatible with the PIC24HJ family, protecting software and layout investments across the 16-bit roadmap. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), solar inverters, and high-intensity LED lighting, where fast ADC sampling and deterministic PWM update loops are mandatory. Design consideration: the 44-QFN exposed pad must be soldered to a solid ground plane for thermal and signal-integrity performance; verify 3.3V regulator headroom against core and I/O current during 40 MIPs operation. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC804T-I/ML

DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804T-I/ML is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and a 3V to 3.6V supply, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33F family implements a modified Harvard, 16-bit RISC architecture with DSP instructions, making it a staple of the power management IC ecosystem for embedded control systems. Key features include 40 MIPS execution at 3.3V, dual program and data buses supporting simultaneous fetch and multiply-accumulate operations, 8 DMA channels for peripheral-to-memory transfers without CPU intervention, and 5 timers for motor-control and power-conversion timing. Peripheral integration covers the motor-control-oriented set expected of the MC family: high-speed PWM, ADC with simultaneous multi-channel sampling, and serial interfaces for industrial communication. The MC804 variant is purpose-built for high-speed repetitive computation. Its architecture provides hardware multiply, divide, and barrel shifter support, plus modulo and bit-reversed addressing modes that accelerate FIR filters and PID loops. According to Microchip, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F devices, enabling seamless migration paths. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and PFC stages, sensorless FOC drives, and industrial automation nodes where deterministic 16-bit control loops must run at tens of kHz. The 44-QFN exposed-pad package improves thermal and grounding performance for power electronics layouts. Design consideration: the 3V to 3.6V operating window requires a clean 3.3V rail; the exposed pad must be soldered to a ground pour for thermal and signal-integrity reasons, and the DSC needs a proper decoupling network plus MCLR pull-up for reliable in-circuit programming (ICSP). This page synthesizes distributor listings, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-27.

Angebot Kontakt
EFM32G200F16-QFN32 - 32MHz ARM Cortex-M3 16KB Flash MCU | Silicon Labs
EFM32G200F16-QFN32

EFM32G200F16-QFN32 - 32MHz ARM Cortex-M3 16KB Flash MCU | Silicon Labs

Silicon Labs EFM32G200F16-QFN32 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 16 kB Flash memory, 8 kB RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN 6 x 6 mm package. Designed for energy-sensitive applications, the Gecko family combines low-power operation, fast wake-up behavior, and energy-saving modes in a compact surface-mount device. The EFM32G200F16-QFN32 supports a 1.98 V to 3.8 V supply range and is suited to embedded control, sensor, industrial, and connected low-power products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G200 belongs to the EFM32 Gecko family, a low-power platform designed around an ARM Cortex-M3 core. Its 32-bit processing supports responsive control logic while the 16 kB Flash configuration provides embedded program storage and the 8 kB RAM provides working memory for protocol handling, state management, and control tasks. Key features include a maximum operating speed of 32 MHz, 24 digital I/O pins, two 16-bit timers, internal oscillator options, and low-power platform features. The 32-QFN exposed-pad package supports compact PCB layouts, while the exposed thermal pad provides a thermal connection to the board and helps transfer heat from the device. The operating temperature range is -40 °C to 85 °C, making the device appropriate for industrial and embedded environments within that range. The EFM32G200 architecture is designed for applications where energy efficiency and rapid response are more important than maximum flash capacity. Its Cortex-M3 processor, Wake-up Interrupt Controller, timer resources, and low-energy modes provide a practical platform for battery-powered sensors, portable instrumentation, building automation, and small industrial control modules. The 24 I/O pins provide connectivity for sensors, switches, indicators, communication interfaces, and external control signals. Typical designs place the microcontroller near the system’s sensor and power-conversion sections, with decoupling capacitors at the supply pins and the exposed pad connected to a suitable ground-plane area. Firmware should use the manufacturer’s low-power configuration procedures, validate wake-up behavior under the required operating conditions, and confirm peripheral pin multiplexing before PCB release. This page combines verified manufacturer and distributor information with package, pricing, sourcing, and replacement guidance for engineers evaluating the EFM32G200F16-QFN32.

Angebot Kontakt
EFM32G200F16-QFN32T - 32MHz ARM Cortex-M3 MCU, 16kB Flash | Silicon Labs
EFM32G200F16-QFN32T

EFM32G200F16-QFN32T - 32MHz ARM Cortex-M3 MCU, 16kB Flash | Silicon Labs

The Silicon Labs EFM32G200F16-QFN32T is a 32-bit ARM Cortex-M3 microcontroller delivering up to 32 MHz CPU performance with 16 kB of Flash and 8 kB of RAM, housed in a 32-pin QFN (6x6 mm) package with exposed pad. The device operates from a 1.98 V to 3.8 V supply and includes 24 digital I/O pins, two 16-bit timers, and the Gecko low-power architecture engineered for energy-sensitive applications such as battery-powered IoT nodes and energy-harvesting endpoints. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, memory, and interface peripherals on one die. The EFM32G200F16-QFN32T belongs to the broader category hierarchy: 32-bit MCU -> ARM Cortex-M3 MCU -> low-power MCU -> embedded microcontroller -> semiconductor IC. The Cortex-M3 is a 32-bit RISC core delivering 1.25 Dhrystone MIPS/MHz per the manufacturer datasheet, making this MCU suitable for both control loops and event-driven sensor fusion. Key specifications of the EFM32G200F16-QFN32T include 16 kB of Flash program memory (16K x 8 organization), 8 kB of SRAM, an ARM Cortex-M3 core running up to 32 MHz, and a wide 1.98 V to 3.8 V supply range. The 32-QFN package measures 6x6 mm with an exposed thermal pad that lowers thermal resistance for high-current GPIO banks and improves PCB ground integrity. The integrated peripherals include 2x 16-bit timers, multiple low-energy interfaces, and the Gecko low-energy peripheral reflex system that allows GPIO and peripheral events to wake the CPU without software intervention, achieving fast wake-up times measured in microseconds. The EFM32G200F16-QFN32T uses a low-leakage process and a proprietary LESENSE/LFRCO peripheral set that supports operation from internal low-frequency oscillators without an external crystal, reducing BOM cost. Its energy modes (EM0-EM4) provide scalable power consumption from active run states down to deep-sleep states with sub-microamp currents, making the device a fit for always-on wireless sensor nodes, wearable health monitors, and remote controls. The 32-QFN (6x6) package supports standard surface-mount reflow and has a Moisture Sensitivity Level (MSL) consistent with most modern QFN parts. Typical applications for the EFM32G200F16-QFN32T include wireless sensor nodes, smart-meter endpoints, wearable health and fitness devices, remote controls, home automation gateways, and industrial sensor hubs. The exposed-pad QFN package also makes the part attractive in space-constrained PCB designs where a 32-pin LQFP cannot fit. Combined with the Gecko low-energy peripherals, designers can build multi-year battery-life products without sacrificing real-time performance. When designing with this device, ensure the exposed pad is soldered to a properly sized ground copper pour to meet the datasheet thermal and electrical performance. Also note that EFM32G parts without the AES suffix do not include the hardware AES accelerator, so cryptographic workloads must run in software. Cross-check pinout against the 32-QFN land pattern before committing to a layout, as the QFN pad and exposed thermal pad are not pin-interchangeable with the LQFP-32 variants in the same family. This page consolidates distributor pricing, datasheet citations, drop-in alternatives from the same QFN-32 footprint, and practical design notes not found in a single manufacturer document.

Angebot Kontakt
EFM32G200F32-QFN32 - ARM Cortex-M3 32MHz MCU 32KB Flash | EFM32 Gecko
EFM32G200F32-QFN32

EFM32G200F32-QFN32 - ARM Cortex-M3 32MHz MCU 32KB Flash | EFM32 Gecko

The Silicon Labs EFM32G200F32-QFN32 is an ARM Cortex-M3 based microcontroller from the EFM32 Gecko family, delivering up to 32 MHz core speed with 32 kB Flash and 8 kB RAM, housed in a 32-pin QFN (6x6 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and a rich mix of peripherals such as timers, ADCs, communication interfaces, and GPIO. The Cortex-M3 core implements the ARMv7-M instruction set with hardware multiply/divide and the Thumb-2 instruction encoding, giving 32-bit performance at 16-bit code density. MCU taxonomy: microcontroller -> embedded MCU -> ARM Cortex-M MCU -> Cortex-M3 MCU -> low-power Cortex-M3 MCU. The EFM32 Gecko family sits at the low-power end of this hierarchy, optimized for battery and energy-harvesting designs. Key features include 24 digital I/O pins (capable of 5V tolerance on most pins), 2 x 16-bit timers plus a 16-bit RTCC, multiple serial interfaces (USART, I2C, USB), a 12-bit ADC, and a low-energy peripheral fabric that can operate while the CPU is asleep. The supply range of 1.98V to 3.8V allows direct connection to a single Li-ion cell or two AA cells, and the deep-sleep current is in the microamp range. Architecturally, the Gecko platform separates the Cortex-M3 core domain from an autonomous low-energy peripheral domain, so ADCs, comparators, and timers can run from LFCLK (32.768 kHz) without waking the CPU. This LESENSE-style partitioning is what enables the family's sub-uA sleep currents and microjoule event response times. Typical applications include IoT sensor nodes, wireless battery powered wearables, smart metering, HVAC sensor nodes, and any batteryless smart-building. The 32-QFN footprint helps compact designs in space-constrained PCBAs. When designing with this device, plan the decoupling network between the supply pins and across DECOUPL pins and respect the exposed-pad PCB layout for thermal and ECS reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the Silicon Labs datasheet alone.

Angebot Kontakt
EFM32G200F64-QFN32 - 32MHz Cortex-M3 MCU, 64KB Flash | Silicon Labs
EFM32G200F64-QFN32

EFM32G200F64-QFN32 - 32MHz Cortex-M3 MCU, 64KB Flash | Silicon Labs

The Silicon Labs EFM32G200F64-QFN32 is an ARM Cortex-M3 based 32-bit microcontroller running at up to 32 MHz with 64 KB of Flash and 16 KB of RAM, housed in a 32-pin QFN (6x6 mm) package. Built on the Gecko low-energy platform, the EFM32G200F64-QFN32 targets energy-sensitive embedded applications where short wake-up time and multiple low-power modes are mandatory, providing 24 digital I/O pins, two 16-bit timers, and a flexible energy management system that delivers Cortex-M3 throughput at substantially lower active and sleep current than legacy 8/16-bit parts. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a wide range of peripherals such as timers, ADC/DAC, communication interfaces, and GPIO. The Cortex-M3 family specifically is a Harvard-architecture 32-bit RISC core with Thumb-2 instruction set, deterministic interrupt handling, and an optional Memory Protection Unit. The EFM32 Gecko series places that core inside a power-aware system hierarchy (MCU -> Cortex-M3 MCU -> low-energy MCU -> ARM Cortex family -> 32-bit embedded processor), giving it a clear positioning between general-purpose Cortex-M3 parts and ultra-low-power Cortex-M0+ devices. Key differentiating features of the EFM32G200F64-QFN32 include the integrated Wake-up Interrupt Controller (WIC) that allows peripherals to wake the CPU directly from deep-sleep without an enabled system clock, and the LESENSE / peripheral reflex system that lets sensor interfaces run autonomously. The WIC and Energy Management Unit are direct contributors to the part's energy-friendly specification: very fast wake-up, multiple EM0-EM4 sleep modes, and low-leakage GPIO retention. The architecture is a 32-bit ARM Cortex-M3 core fabricated on a low-leakage CMOS process, supporting up to 32 MHz with 1.25 Dhrystone MIPS/MHz and an MPU supporting up to 8 memory segments. Compared with earlier 8/16-bit microcontrollers, the EFM32G200F64-QFN32 provides roughly an order-of-magnitude higher compute density per joule, and the QFN-32 (6x6 mm) package keeps the footprint compatible with space-constrained IoT and sensor designs. Typical applications include battery-powered wireless sensor nodes, energy-harvesting devices, smart-metering endpoints, wearable health and fitness products, and industrial IoT edge nodes where the MCU spends most of its life in sleep and wakes only briefly to process sensor data. The wide 1.98 V to 3.8 V supply range also supports single-cell Li-ion or two-AAA cell topologies. When designing with this part, pay close attention to decoupling (one 100 nF per VDD pin group plus a bulk cap), the routing of the RESETn line, and the unused-pin tie-off to avoid floating inputs that increase sleep current. Designers migrating from 8-bit parts should re-evaluate the interrupt priority model, as the Cortex-M3 NVIC allows nested pre-emption that 8051/PIC designs do not provide. This page synthesizes distributor pricing, drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone, providing an engineering reference for procurement and design teams evaluating the EFM32G200F64-QFN32.

Angebot Kontakt