2EDL8033G4CXTMA1 vs 6EDL04I065PRXUMA1 Vergleich
Detaillierter Direktvergleich von 2EDL8033G4CXTMA1 von Infineon und 6EDL04I065PRXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | 2EDL8033G4CXTMA1 | 6EDL04I065PRXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,84 | $2,65 |
| Product Type | Half-Bridge Gate Driver IC | Three-Phase Gate Driver IC |
| Configuration | High-Side / Low-Side, Non-Inverting | — |
| Anzahl der Ausgänge | 2 (HS + LS) | — |
| Source Drive Current | 3 A | — |
| Sink Drive Current | 4 A | — |
| Bootstrap Voltage (Max) | 120 V | — |
| VCC Supply Voltage | 10 V to 20 V | — |
| Logic Input Compatibility | 3.3 V / 5 V CMOS / TTL | — |
| Isolation Technology | Junction-isolated | — |
| Propagation Delay (Typ) | 45 ns | — |
| Channel-to-Channel Matching | <10 ns | — |
| Integrated Bootstrap Diode | Yes | — |
| Betriebstemperaturbereich | -40C to +125C | — |
| Gehäuse | PG-VDSON-10-2 (10-pin VDSON with exposed pad) | PG-TSSOP-25 |
| Montageart | Surface Mount | Surface Mount |
| Marking Code | 2ED8033G4C | — |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | Half-Bridge, 3-phase (6 outputs) |
| Blocking Voltage | — | 650 V |
| Ausgangskonfiguration | — | 6 outputs (3 high-side + 3 low-side) |
| Logic Inputs | — | Non-Inverting |
| Source Current (typ.) | — | 0.24 A |
| Sink Current (typ.) | — | 0.5 A |
| Logic Supply Voltage (VCC) | — | 3.3 V to 5 V (typ. 5 V) |
| High-Side Floating Supply Voltage (VB) | — | up to 650 V (offset) |
| Bootstrap Diodes | — | Integrated (3x) |
| Over-Current Protection (OCP) | — | Yes |
| Under-Voltage Lockout (UVLO) | — | Yes (per channel) |
| Fault Output | — | Yes (open-drain / active-low) |
| Propagation Delay (typ.) | — | [DATA_NEEDED: propagation delay] |
| Betriebs-Sperrschichttemperatur | — | -40 C to +125 C |
| MSL-Level | — | 2 (per JEDEC J-STD-020) |