6EDL04N02PRXUMA1 vs 2ED21844S06JXUMA1 Vergleich
Detaillierter Direktvergleich von 6EDL04N02PRXUMA1 von Infineon und 2ED21844S06JXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | 6EDL04N02PRXUMA1 | 2ED21844S06JXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,32 | $1,68 |
| Product Type | 3-Phase Gate Driver IC | — |
| Driver Configuration | Half-bridge (3 high-side + 3 low-side) | Half-Bridge |
| Maximum Blocking Voltage | +180 V (VS referenced to GND for high side) | — |
| Rated Supply Voltage (VCC) | 200 V class (operating range 10 V to 20 V on VCC) | — |
| Source Current (typ.) | 0.375 A | — |
| Sink Current (typ.) | 0.75 A | — |
| Bootstrap Diode | Integrated (BSD) on all 3 high-side drivers | Integrated |
| Over-Current Protection | Yes (single-shunt, ITRIP/CIN pin) | — |
| Enable Pin (EN) | Yes (active-high) | — |
| Fault Output (nFAULT) | Yes (active-low, open-drain) | — |
| Input Logic Compatibility | CMOS / LSTTL, 3.3 V and 5 V | TTL/CMOS 3.3 V and 5 V |
| Interlocking / Anti-shoot-through | Yes (built-in per phase pair) | — |
| Process Technology | Thin-film SOI (Silicon-On-Insulator) | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40 C to +125 C |
| Maximum Junction Temperature | +150 °C | — |
| Gehäuse | PG-TSSOP-28 (28-pin, 4.40 mm width, exposed pad) | PG-DSO-14-49 (DSO-14) |
| Montageart | Surface Mount | Surface Mount |
| Target Switches | MOSFETs up to 180 V, IGBTs up to 180 V | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020, [DATA_NEEDED: confirm level]) | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant | Compliant |
| Number of Drivers | — | 2 (high-side + low-side) |
| Input Type | — | Non-Inverting |
| Blocking Voltage (Voffset) | — | 650 V |
| Output Current (Source/Sink) | — | 2.5 A typical |
| Supply Voltage (VCC) | — | 10 V to 20 V [DATA_NEEDED: exact range] |
| Propagation Delay (Typ.) | — | 200 ns [DATA_NEEDED: matching value] |
| Undervoltage Lockout (UVLO) | — | Yes, both HS and LS rails |
| Shutdown Pin | — | Yes |
| Negative VS Transient Immunity | — | -100 V typical |