AD621ARZ vs INA141UAG4 Vergleich
Detaillierter Direktvergleich von AD621ARZ von Analog Devices und INA141UAG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteSpezifikationsvergleich
| Parameter | AD621ARZ | INA141UAG4 |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Amplifier Type | Single-channel instrumentation amplifier | — |
| Number of Channels | 1 circuit | — |
| Small-Signal Bandwidth | 800 kHz | — |
| Slew Rate | 1.2 V/us | [DATA_NEEDED: slew rate] |
| Input Bias Current | 500 pA | [DATA_NEEDED: input bias current] |
| Output Offset Voltage | 75 uV | — |
| Supply Voltage Range | Up to +/-18 V | [DATA_NEEDED: supply voltage range] |
| Gehäuse | 8-pin SOIC | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | [DATA_NEEDED: input common-mode range] |
| Ausgangsspannungsbereich | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical supply current] |
| Ruhestrom | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Input Noise Current | [DATA_NEEDED: input noise current] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Gain Drift | [DATA_NEEDED: gain drift] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 110 dB |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Count | — | 3 amplifiers |
| Gain | — | 10 or 100 |
| Bandwidth | — | 1 MHz |
| Input Offset Voltage | — | 20 µV |
| Input Offset Voltage, Datasheet Listing | — | 250 µV |
| Input Noise Density | — | 8 nV/√Hz |
| Ausgangstyp | — | Single-ended |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |