AD677KD vs AD677JN Vergleich
Detaillierter Direktvergleich von AD677KD von Analog Devices und AD677JN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
AD677KD - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677KD ⚠ Letzte BestellmöglichkeitAnalog Devices
AD677JN - 16-Bit 100 kSPS Serial ADC | Analog Devices
AD677JN ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | AD677KD | AD677JN |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Letzte Kaufgelegenheit |
| Auflösung | 16 bit | 16 bit |
| Abtastrate | 100 kSPS | — |
| Output Interface | Serial | — |
| Input Count | 1 input | — |
| Conversion Architecture | Successive-approximation register (SAR) | — |
| Internal Architecture | Switched-capacitor charge redistribution | — |
| Total Conversion Time | 10 us | 10 µs |
| Sample-and-Hold | Autocalibrating on-chip sample-and-hold | On-chip sample-and-hold function |
| Missing Codes | No missing codes at 1 LSB | No missing codes |
| Signal-to-Noise Ratio | Approximately 99 dB | — |
| Total Harmonic Distortion | 92 dB | -99 dB |
| Full-Power Bandwidth | 1 MHz | 1 MHz |
| Gehäuse | 16-pin plastic DIP (16-PDIP) | 16-pin narrow plastic DIP |
| Pin-Anzahl | 16 pins | — |
| Montageart | Through-hole | Through-hole |
| Temperature Grade | Commercial | — |
| Analog Supply Voltage | 12 V | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Lead-free | — |
| Datasheet Architecture | Multipurpose 16-bit serial-output ADC | — |
| Conversion Rate | — | 100 kSPS |
| Ausgangstyp | — | Serial output |
| Architecture | — | Switched-capacitor / charge-redistribution ADC |
| Signal-to-Noise Plus Distortion | — | 92 dB |
| Analog Supply | — | +5 V and +12 V |
| Digital Supply | — | VDD supply; exact operating value [DATA_NEEDED: VDD operating voltage range] |
| Typical Power Consumption, 10 V Reference | — | 450 mW during conversion |
| Typical Power Consumption, 5 V Reference | — | 360 mW during conversion |
| Ground Sensing | — | Remote analog-ground sense |
| Autocalibration | — | On-chip autocalibration |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |