AD7708BRU-REEL vs AD7709ARU-REEL Vergleich

Detaillierter Direktvergleich von AD7708BRU-REEL von Analog Devices und AD7709ARU-REEL von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter AD7708BRU-REEL AD7709ARU-REEL
Marke Analog Devices Analog Devices
Kategorie ADC/DAC ADC/DAC
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $6,19 $7,10
Auflösung 16 bits —
Number of Input Channels 4 differential / 8 pseudo-differential / 10 pseudo-differential 2 (fully-differential) or 4 (pseudo-differential)
ADC Architecture Sigma-Delta —
Supply Voltage Range 2.7 V to 5.25 V (AVDD, DVDD) —
Data Interface DSP, MICROWIRE, QSPI, Serial, SPI SPI, QSPI, MICROWIRE, DSP-compatible serial
Gehäuse 28-TSSOP (0.173 in / 4.40 mm width) 24-TSSOP (4.40 mm body width)
Montageart Surface Mount Surface Mount
Betriebstemperaturbereich -40 C to +85 C -40 °C to +85 °C (industrial)
Factory Calibration Yes, per channel —
Programmable Gain Amplifier Yes (gains 1 to 128) —
Reference Input External (2.5V typical, e.g. ADR291/AD780) —
Input Configuration 4 fully-differential or 8/10 pseudo-differential —
Pin-Compatible Upgrade AD7718 (24-bit) in same TSSOP-28 / SOIC-28 —
RoHS-Status Compliant (AD7708BRUZ variant); non-RoHS on BRU suffix Compliant
Packaging Tape & Reel (REEL) Tape & Reel (TR)
Number of Bits — 16
Architecture — Sigma-Delta (Σ-Δ)
Abtastrate — 105 sps
Input Voltage Range (unipolar) — 1.024 V to 6.144 V
Input Voltage Range (bipolar) — ±1.024 V to ±6.144 V
PGA Gain Range — 1 to 128
Analog Supply Voltage (AVDD) — 2.7 V to 5.25 V
Digital Supply Voltage (DVDD) — 2.7 V to 5.25 V
Excitation Current Sources — 3 switchable, software-selectable (typ. 10 µA / 200 µA / 1 mA)
50/60 Hz Rejection — Simultaneous, at 20 Hz update rate
Output Update Rate — 20 Hz (10 Hz, 25 Hz also programmable)
On-chip Calibration — Self-calibration and system calibration registers
Digital I/O — 4-bit GPIO port
Low-Side Power Switches — Yes, internal FET switches for sensor power gating
Power Dissipation — [DATA_NEEDED: power dissipation value]
MSL-Level — [DATA_NEEDED: MSL level]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern