AD9226AST vs AD9226ASTZ Vergleich
Detaillierter Direktvergleich von AD9226AST von Analog Devices und AD9226ASTZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
AD9226AST - 12-Bit 65-MSPS ADC | Analog Devices
AD9226AST [data_needed: lifecycle status]Spezifikationsvergleich
| Parameter | AD9226AST | AD9226ASTZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | [DATA NEEDED: Lifecycle Status] | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $61,06 |
| ADC Type | Pipeline ADC | — |
| Auflösung | 12 bit | 12 bit |
| Abtastrate | 65 MSPS | 65 MSPS |
| Number of Inputs | 1 input | — |
| Input Architecture | Differential pipelined | — |
| Supply Configuration | Single supply | — |
| Sample-and-Hold Amplifier | On-chip | — |
| Voltage Reference | On-chip | — |
| ENOB | 11.1 bit at 10 MHz input | — |
| Intermodulation Distortion | -75 dBFS or better at 140 MHz input | Reported in supplied data as 75 dBFS at fIN = 140 MHz |
| No Missing Codes | Guaranteed | — |
| Gehäuse | 48-LQFP (7 mm x 7 mm) | 48-LQFP, 7 mm x 7 mm |
| Pin-Anzahl | 48 pins | — |
| Montageart | Surface mount | Surface mount |
| Output Interface | [DATA_NEEDED: output interface] | 12-bit parallel |
| Eingangsspannungsbereich | [DATA_NEEDED: input voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Analog Input Bandwidth | [DATA_NEEDED: analog input bandwidth] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Reported as RoHS |
| Architecture | — | Multistage differential pipeline |
| Number of Channels | — | 1 input |
| Versorgungsspannung | — | 5 V single supply |
| Betriebstemperatur | — | -40 °C to +85 °C |
| On-Chip Sample-and-Hold Amplifier | — | Yes |
| On-Chip Voltage Reference | — | Yes |
| Input Frequency Application | — | IF undersampling and communications |
| Signal-to-Noise Ratio | — | 31 MHz value reported in supplied distributor data |
| Spurious-Free Dynamic Range | — | 75 dBFS at fIN = 140 MHz, as reported in supplied data |
| Effective Number of Bits | — | 11.1 ENOB at fIN = 10 MHz, as reported in supplied data |
| Datasheet Download | — | Manufacturer PDF available |