ADC12040CIVY vs ADC12DL066CIVS Vergleich
Detaillierter Direktvergleich von ADC12040CIVY von Texas Instruments und ADC12DL066CIVS von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ Aktiv
Spezifikationsvergleich
| Parameter | ADC12040CIVY | ADC12DL066CIVS |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,52 | $9,80 |
| Auflösung | 12 bit | 12 bits |
| Abtastrate | 40 MSPS (min 40 MSPS over temperature) | — |
| Number of Channels | 1 input | 2 (simultaneous sampling) |
| Architecture | Pipelined | Pipelined |
| Versorgungsspannung | +5V ±5% (single supply) | — |
| Power Consumption | 340 mW (typ) at 40 MHz | — |
| Differential Non-Linearity (DNL) | ±0.4 LSB (typ) | +/-0.5 LSB (typ) |
| Signal-to-Noise Ratio (SNR) | 69 dB (typ) at fIN = 10 MHz | — |
| Effective Number of Bits (ENOB) | 11.2 bits (typ) at fIN = 10 MHz | — |
| Input Type | Differential (single-ended capable) | — |
| Reference Type | External, with internal buffer | — |
| Digital Output Interface | Parallel, CMOS, straight binary | — |
| Digital Output Logic Levels | 2.35V to 5V compatible | — |
| Power Down Mode | On-chip (low quiescent between conversions) | Yes |
| Betriebstemperaturbereich | -40C to +85C (industrial) | -40C to +85C |
| Gehäuse | 32-LQFP (NEY) 7x7 mm | 64-TQFP (PAG) 10x10 mm |
| Montageart | Surface Mount | Surface Mount |
| Pin Family Compatibility | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 | — |
| RoHS-Status | Compliant (NOPB suffix variants only; check exact suffix) | Compliant (NOPB suffix) |
| Sample Rate (per channel) | — | 66 MSPS |
| Input Bandwidth | — | 450 MHz |
| Supply Voltage (Analog) | — | 3.3 V (single supply) |
| Digital I/O Supply | — | 2.4 V to 3.3 V |
| Signal-to-Noise Ratio (SNR, fIN=10 MHz) | — | 66 dB (typ) |
| Spurious-Free Dynamic Range (SFDR, fIN=10 MHz) | — | [DATA_NEEDED: SFDR specific value] |
| Reference | — | Internal (with external option) |
| Output Format | — | Choice of Binary or 2's Complement |
| Pin Compatibility | — | Drop-in compatible with ADC12D040 |