ADF4107BRU vs ADF4193BCPZ Vergleich
Detaillierter Direktvergleich von ADF4107BRU von Analog Devices und ADF4193BCPZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADF4193BCPZ - 3.5 GHz Fast-Settling PLL Synthesizer | Analog Devices
ADF4193BCPZ ✓ AktivSpezifikationsvergleich
| Parameter | ADF4107BRU | ADF4193BCPZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Clock & Timing | Clock & Timing |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Integer-N PLL frequency synthesizer | — |
| Maximum RF Output Frequency | 7 GHz | — |
| Input Frequency Range | 1 GHz to 7 GHz | — |
| A Counter | 6-bit programmable | — |
| B Counter | 13-bit programmable | — |
| Prescaler | Dual-modulus P/P + 1 | — |
| Reference Divider | Programmable | — |
| Charge Pump | Precision charge pump | — |
| Phase-Frequency Detector | Low-noise digital PFD | — |
| Versorgungsspannung | AVDD = DVDD = 3 V ± 10% | — |
| Maximum Supply Voltage | 5.5 V | — |
| RSET | 5.1 kΩ | — |
| Typical Phase Noise | -83 dBc/Hz at 1 kHz offset | — |
| Typical Spurs | Better than -70 dBc | — |
| Gehäuse | 16-lead TSSOP, 0.173 inch width, 4.40 mm width | 32-lead WFQFN with exposed pad |
| Montageart | Surface mount | Surface mount |
| Operating Application | Wireless receiver and transmitter local oscillators | — |
| RoHS-Status | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | — |
| Device Type | — | RF PLL frequency synthesizer |
| Maximum RF Input Frequency | — | 3.5 GHz |
| Minimum RF Input Frequency | — | 300 MHz |
| Maximum Output Frequency | — | 470 MHz |
| Output Channel Count | — | 1 |
| Betriebstemperaturbereich | — | -40°C to +85°C |
| Phase Detector Type | — | Low-noise digital phase-frequency detector |
| Charge Pump Type | — | Precision differential charge pump |
| Loop Architecture | — | Dual-band narrow-band and wide-band operation |
| Control Interface | — | [DATA_NEEDED: serial interface type and electrical protocol] |
| Supply Voltage Range | — | [DATA_NEEDED: analog and digital supply voltage ranges] |
| Reference Input Frequency Range | — | [DATA_NEEDED: reference input frequency range] |
| Phase Noise | — | [DATA_NEEDED: phase noise versus offset frequency] |
| Lock Time | — | [DATA_NEEDED: lock time and test conditions] |
| Reference Spur | — | [DATA_NEEDED: reference spur level and test conditions] |
| RF Output Power | — | [DATA_NEEDED: RF output power and load condition] |
| Integrated Reference Divider | — | [DATA_NEEDED: reference divider ratio range] |
| Exposed Thermal Pad | — | Present |