ADM230LJN vs ADM230LAN Vergleich
Detaillierter Direktvergleich von ADM230LJN von Analog Devices und ADM230LAN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM230LJN - +5V CMOS RS-232 Driver/Receiver, 120 kbps, PDIP-20 | Analog Devices
ADM230LJN ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | ADM230LJN | ADM230LAN |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Unknown |
| Device Type | RS-232 line driver / receiver (transceiver) | — |
| Versorgungsspannung | +5 V (single supply) | 5 V |
| Datenrate | 120 kbps | — |
| Interface Standard | EIA-232-E / V.28 | — |
| Betriebstemperatur | 0 °C to +70 °C | — |
| Gehäuse | PDIP-20 (plastic DIP-20) | PDIP-14 |
| Pin-Anzahl | 20 pins | — |
| Montageart | Through-hole | Through-hole |
| Number of Drivers / Receivers | [DATA_NEEDED: number of driver and receiver channels] | — |
| Shutdown / Enable Function | [DATA_NEEDED: shutdown or enable pin availability] | — |
| Output Slew Rate | [DATA_NEEDED: driver slew rate] | — |
| ESD Protection | [DATA_NEEDED: ESD rating on driver and receiver pins] | — |
| On-Chip Charge Pump | [DATA_NEEDED: internal charge pump and external capacitor requirements] | — |
| Moisture Sensitivity Level | [DATA_NEEDED: MSL] | — |
| Logic Compatibility | CMOS / 5 V TTL-compatible | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| Automotive Grade (AEC-Q100) | not_applicable | — |
| Manufacturer | Analog Devices | — |
| Product Type | — | Dual RS-232 driver and receiver interface IC |
| Supply Configuration | — | Single positive 5 V supply |
| Logic Technology | — | CMOS |
| Maximum Data Rate | — | 120 kB/s |
| RS-232 Output Swing | — | 9 V |
| DC-DC Converter | — | On-board |
| Charge-Pump Capacitor Value | — | 1 F |
| Power Shutdown | — | Low-power shutdown supported |
| Receiver Operation During Shutdown | — | Receivers remain active |
| Receiver Input Voltage | — | 30 V |
| RS-232 Standards | — | EIA-232-E and V.28 |
| Anzahl der Pins | — | 14 pins |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |