ADM232LJNZ vs ADM232LAN Vergleich
Detaillierter Direktvergleich von ADM232LJNZ von Analog Devices und ADM232LAN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADM232LJNZ | ADM232LAN |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Device Type | RS-232 transceiver | — |
| Driver and Receiver Configuration | 2 drivers and 2 receivers | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Logic Technology | 5 V CMOS | — |
| Maximum Data Rate | 100 kbps | — |
| Interface Standard | RS-232 | EIA-232-E and V.28 |
| Supported Signaling Standards | EIA-232-E and V.28 | — |
| Anzahl der Pins | 16 pins | — |
| Gehäuse | 16-pin PDIP | 16-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Production Status | Production | — |
| Negative Supply Requirement | Not required at the device interface | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| External Charge-Pump Capacitors | [DATA_NEEDED: charge-pump capacitor count and values] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | 2/2 RS-232 transceiver |
| Number of Transmitters | — | 2 |
| Number of Receivers | — | 2 |
| Versorgungsspannung | — | 5 V |
| Datenrate | — | 120 kB/s |
| On-Board DC-DC Converter | — | Yes |
| RS-232 Output Swing | — | 9 V |
| External Charge-Pump Capacitor | — | 1 µF |
| Low-Power Shutdown | — | Yes |
| Receivers Active During Shutdown | — | Yes |
| Maximum Receiver Input Voltage | — | 30 V |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |