ADM236LJR vs ADM238LJR Vergleich
Detaillierter Direktvergleich von ADM236LJR von Analog Devices und ADM238LJR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADM236LJR | ADM238LJR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | +5 V powered CMOS RS-232 drivers/receivers | RS-232 line driver and receiver transceiver |
| Versorgungsspannung | 5 V | 5 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s |
| Driver Count | 3 | — |
| Receiver Count | 3 | — |
| Supported Standards | EIA-232-E and V.28 | — |
| DC-DC Converter | On-board | — |
| RS-232 Output Swing | 9 V | — |
| Driver Signal Level | Approximately ±5 V at data rates up to 100 kbps under worst-case loading | — |
| Charge-Pump Capacitor | 1 µF | — |
| Shutdown Power Dissipation | Less than 5 µW | — |
| Receivers Active During Shutdown | 2 | — |
| Maximum Receiver Input Voltage | 30 V | — |
| Gehäuse | 20-pin SOIC | 24-pin SOIC |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Transceiver Functions | 3 drivers and 3 receivers | — |
| Supplier | Rochester Electronics, LLC | — |
| Number of Drivers | — | 4 |
| Number of Receivers | — | 4 |
| Interface Standards | — | EIA-232-E and V.28 |
| Driver Output Swing | — | 9 V |
| Charge-Pump Capacitor Value | — | 1 uF |
| Shutdown Function | — | Low-power shutdown with receivers active |
| Receiver Maximum Input Voltage | — | 30 V |
| Package Width | — | 7.5 mm |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| Power Dissipation | — | [DATA_NEEDED: maximum power dissipation] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Driver Output Resistance | — | [DATA_NEEDED: driver output resistance] |