ADM2461EBRWZ-RL vs ADM2561EBRNZ Vergleich
Detaillierter Direktvergleich von ADM2461EBRWZ-RL von Analog Devices und ADM2561EBRNZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ Aktiv
Spezifikationsvergleich
| Parameter | ADM2461EBRWZ-RL | ADM2561EBRNZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $6,78 |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers/Receivers | 1/1 | 2/2 |
| Duplex | Half Duplex | Full / Half |
| Maximum Data Rate | 500 kbps | — |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | — |
| Betriebstemperatur | -40C to +85C | — |
| Gehäuse | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 | — |
| RoHS-Status | Compliant | Compliant |
| Funktion | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Datenrate | — | 25 Mbps |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| Betriebstemperaturbereich | — | -40C to +105C |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |