ADM2561EBRNZ vs ADM2563EBRNZ Vergleich
Detaillierter Direktvergleich von ADM2561EBRNZ von Analog Devices und ADM2563EBRNZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM2561EBRNZ | ADM2563EBRNZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,78 | $12,21 |
| Funktion | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter | — |
| Protocol | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) | RS-422, RS-485 (full-duplex) |
| Number of Drivers/Receivers | 2/2 | — |
| Duplex | Full / Half | — |
| Datenrate | 25 Mbps | 25 Mbps |
| Isolation Voltage (RMS, 60s) | 3 kV | — |
| ESD Protection (bus pins, IEC 61000-4-2) | ±15 kV | — |
| Unit Load | 1/8 unit load (up to 256 nodes on bus) | — |
| Supply Voltage (logic side) | 3.0 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Hot-Swap Tolerant | Yes | — |
| Betriebstemperaturbereich | -40C to +105C | −40 °C to +85 °C |
| Gehäuse | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) | 28-SOIC-W-FP (wide-body SOIC, exposed pad) |
| Montageart | Surface Mount | — |
| RoHS-Status | Compliant | Compliant |
| Safety / Regulatory | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB | — |
| Number of Drivers / Receivers | — | 1 / 1 |
| Isolation Voltage (RMS) | — | 3 kV (UL 1577 / IEC 61010-1) |
| VCC Supply Range | — | 3.0 V to 5.5 V |
| VIO Logic Supply Range | — | 1.7 V to 5.5 V |
| Isolated DC-DC Output (VISOOUT) | — | 3.3 V or 5 V selectable (VSEL) |
| IEC ESD (Bus Pins) | — | ±15 kV (IEC 61000-4-2, air / contact) |
| HBM ESD (Bus Pins) | — | ±25 kV |
| Common-Mode Range | — | −25 V to +25 V |
| Receiver Hysteresis | — | 30 mV |
| Quiescent Current (VCC, no load) | — | [DATA_NEEDED: quiescent current mA] |
| Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) |