ADM4857AR vs ADM4851ARZ Vergleich
Detaillierter Direktvergleich von ADM4857AR von Analog Devices und ADM4851ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM4857AR | ADM4851ARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Versorgungsspannung | 5 V | 5 V |
| Communication Mode | Half-duplex and full-duplex | — |
| Supported Standards | RS-485 and RS-422 | EIA RS-485 and EIA RS-422 |
| Network Topology | Multipoint bus | — |
| Output Slew Rate | [DATA_NEEDED: maximum and minimum slew rates] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 500 kbps |
| Differential Driver Output | [DATA_NEEDED: differential output voltage] | — |
| Receiver Input Range | [DATA_NEEDED: differential receiver input voltage] | — |
| Driver Enable Control | [DATA_NEEDED: enable pin polarity and control configuration] | — |
| Receiver Output Logic | [DATA_NEEDED: receiver output voltage levels] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-lead SOIC | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS compliance] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | not_applicable |
| Terminal Configuration | Differential bus input and output | — |
| Duplex Mode | — | Half-duplex |
| Driver Configuration | — | 1/1 transceiver |
| Slew Rate | — | Limited |
| Signal Type | — | Balanced differential |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Receiver Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Abschaltstrom | — | [DATA_NEEDED: shutdown current] |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |