ADM485ARZ vs ADM242AR Vergleich
Detaillierter Direktvergleich von ADM485ARZ von Analog Devices und ADM242AR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ Aktiv
Spezifikationsvergleich
| Parameter | ADM485ARZ | ADM242AR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Versorgungsspannung | 5 V (single supply) | 4.5 V to 5.5 V |
| Datenrate | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| Gehäuse | SOIC-8 (SO-8) / SO-8 | SOIC-18 |
| Montageart | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL-Level | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | CMOS RS-232 transceiver |
| Driver Count | — | 2 |
| Receiver Count | — | 2 |
| Maximum Data Rate | — | 200 kbps |
| Nominal Supply | — | 5 V |
| External Charge-Pump Capacitor | — | 0.1 µF |
| Betriebstemperatur | — | -40°C to +85°C |
| Driver and Receiver Configuration | — | 2/2 full RS-232 transceiver |
| Logic Compatibility | — | CMOS RS-232 |
| Charge-Pump Architecture | — | On-chip charge pump |
| RS-232 Level Generation | — | Bipolar levels generated from 5 V supply |
| Supply Type | — | Single supply |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |