ADP5585ACBZ-00-R7 vs PCA9557D Vergleich
Detaillierter Direktvergleich von ADP5585ACBZ-00-R7 von Analog Devices und PCA9557D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADP5585ACBZ-00-R7 - 10 I/O Keypad Controller | Analog Devices
ADP5585ACBZ-00-R7 UnknownTexas Instruments
PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)
PCA9557D ✗ AbgekündigtSpezifikationsvergleich
| Parameter | ADP5585ACBZ-00-R7 | PCA9557D |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Unknown | Ende des Lebenszyklus |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,71 |
| Device Type | 10-I/O port expander with keypad matrix decoder | — |
| Number of Configurable I/Os | 10 I/Os | — |
| Schnittstelle | I2C | I2C, SMBus |
| I2C Maximum Frequency | 1 MHz | — |
| Supply Voltage Range | 1.65 V to 3.6 V | — |
| Keypad Matrix Support | Up to 6 × 5 matrix with ADP5585ACBZ-01-R7 or ADP5585ACPZ-01-R7 option | — |
| FIFO | 16-element FIFO for event recording | — |
| Programmable Logic | Supported | — |
| Reset Generator | Supported | — |
| PWM Generator | Supported | — |
| Interface Width | 8-bit | — |
| Gehäuse | 16-WLCSP (1.59 mm × 1.59 mm) | 16-SOIC (DR, 7.5 mil pitch) |
| Package Type | Wafer-level chip-scale package | — |
| Application Category | Keypad entries and I/O expansion | — |
| Portable Device Suitability | Phones, remote controls, and cameras | — |
| Nonportable Device Suitability | Healthcare, industrial, and instrumentation applications | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 status] | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | — |
| Pinout | [DATA_NEEDED: complete pin names and functions] | — |
| Number of I/O Bits | — | 8 |
| Bus Frequency (Max) | — | 400 kHz |
| Supply Voltage (VCC) | — | 2.3 V to 5.5 V |
| Standby Current (Max) | — | 1 uA |
| Output Drive Current per Bit | — | [DATA_NEEDED: per-bit source/sink mA rating] |
| I/O Voltage Tolerance | — | 5.5 V tolerant |
| Reset Input | — | Active-low hardware RESET + software reset (general call) |
| Interrupt Output (INT) | — | Yes, open-drain |
| Slave Address Pins | — | A0, A1, A2 (3 pins, 8 addresses within family) |
| Montageart | — | Surface Mount |
| MSL-Level | — | 1 (unlimited floor life) |
| Lead-Free | — | Yes |
| Configuration Registers | — | Input/output direction registers, polarity inversion |