ADS7841E vs ADC124S051CIMM Vergleich
Detaillierter Direktvergleich von ADS7841E von Texas Instruments und ADC124S051CIMM von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ADC124S051CIMM - 4-Ch 12-Bit 500kSPS SAR ADC | Texas Instruments
ADC124S051CIMM ObsoleteSpezifikationsvergleich
| Parameter | ADS7841E | ADC124S051CIMM |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Obsolete |
| ADC Resolution | 12 bits, programmable to 8 bits | — |
| Number of Input Channels | 4 channels | — |
| Input Configuration | 4 single-ended or 2 differential inputs | — |
| Conversion Architecture | Successive-approximation-register ADC | — |
| Maximum Conversion Rate | 200 kHz | — |
| Typical Power Dissipation | 2 mW at 200 kHz and +5 V supply | — |
| Reference Voltage Range | 100 mV to VCC | — |
| Eingangsspannungsbereich | 0 V to VREF | — |
| Integral Nonlinearity | ±1 LSB maximum | — |
| Differential Nonlinearity | ±1 LSB maximum | — |
| Missing Codes | No missing codes | — |
| Signal-to-Noise and Distortion | 72 dB SINAD | — |
| Serial Interface | Synchronous serial interface | — |
| Supply Type | Single supply | — |
| Gehäuse | 16-pin SSOP | 10-pin VSSOP (DGS) 3 mm × 3 mm |
| Montageart | Surface mount | Surface Mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Auflösung | — | 12 bit |
| Sample Rate | — | 200 kSPS to 500 kSPS |
| Number of Channels | — | 4 |
| Input Type | — | Single-Ended (4 pseudo-differential pairs) |
| Architecture | — | SAR (Successive Approximation) |
| Versorgungsspannung | — | 2.7 V to 5.25 V (single supply) |
| Analog Supply Current at 200 kSPS | — | 1.55 mW total (typ) |
| Abschaltstrom | — | 0.06 µA (typ) |
| External Reference Voltage | — | 1 V to VDD (typ 2.5 V) |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL max in LSB] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL max in LSB] |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD at fin] |
| Effective Number of Bits (ENOB) | — | [DATA_NEEDED: ENOB at fin] |
| Digital Interface | — | SPI / QSPI / MICROWIRE-compatible |
| Betriebstemperaturbereich | — | -40 °C to +85 °C |
| MSL-Level | — | 1 (unlimited) |
| Pin Compatibility | — | Pin-compatible with ADC084S051 (8-bit) and ADC124S021 (lower speed) |