AK5385BVS vs AK5394AVS Vergleich
Detaillierter Direktvergleich von AK5385BVS von AKM (Asahi Kasei Microdevices) und AK5394AVS von AKM (Asahi Kasei Microdevices). Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
AKM (Asahi Kasei Microdevices)
AK5394AVS - 24-bit 192kHz 123dB ADC | AKM (Asahi Kasei)
AK5394AVS ObsoleteSpezifikationsvergleich
| Parameter | AK5385BVS | AK5394AVS |
|---|---|---|
| Marke | AKM (Asahi Kasei Microdevices) | AKM (Asahi Kasei Microdevices) |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Converter Type | Stereo audio analog-to-digital converter | — |
| Auflösung | 24 bit | 24-bit |
| Number of Channels | 2 channels | 2 (stereo) |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Sampling Rate Range | 8 kHz to 216 kHz | — |
| Modulator Architecture | Enhanced Dual Bit | Advanced multi-bit delta-sigma |
| Output Interface | Serial | Serial audio data (I2S-compatible) |
| Analog Supply Voltage Range | 3 V to 5.25 V | — |
| Digital Supply Voltage Range | 4.75 V to 5.25 V | — |
| Gehäuse | 28-SOP | 28-pin SOP (7.50 mm / 0.295" width) |
| Montageart | Surface Mount | Surface Mount |
| Device Category | Data Acquisition, ADCs/DACs, Special Purpose | — |
| Signal Type | Analog audio input | — |
| Application Class | High-end audio systems | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Clock Frequency | [DATA_NEEDED: clock frequency] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Manufacturer | — | AKM (Asahi Kasei Microdevices) |
| Part Number | — | AK5394AVS |
| Abtastrate | — | 1 kHz to 216 kHz |
| Dynamic Range | — | 123 dB (A-weighted, typical) |
| Analog Supply Voltage | — | 4.75 V to 5.25 V (5 V ±5%) |
| Digital Supply Voltage | — | 3 V to 5.25 V |
| Power Dissipation | — | 665 mW (typical) |
| Stopband Attenuation | — | 120 dB (decimation filter) |
| Passband Ripple | — | 0.001 dB (decimation filter) |
| Digital HPF | — | Yes (with offset calibration) |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| Pin Compatibility Note | — | Semi-pin-compatible with AK5392 / AK5393 (per manufacturer datasheet) |