ATMEGA1284P-MUR vs ATMEGA128L-8AI Vergleich

Detaillierter Direktvergleich von ATMEGA1284P-MUR von Microchip Technology und ATMEGA128L-8AI von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Microchip Technology
ATMEGA1284P-MUR ATMEGA1284P-MUR - 8-bit AVR MCU 20MHz 128KB Flash | Microchip

ATMEGA1284P-MUR - 8-bit AVR MCU 20MHz 128KB Flash | Microchip

ATMEGA1284P-MUR ✓ Aktiv
Microchip Technology
ATMEGA128L-8AI ATMEGA128L-8AI - 8-bit AVR MCU 8MHz 128KB TQFP-64 | Microchip

ATMEGA128L-8AI - 8-bit AVR MCU 8MHz 128KB TQFP-64 | Microchip

ATMEGA128L-8AI ✓ Aktiv

Spezifikationsvergleich

Parameter ATMEGA1284P-MUR ATMEGA128L-8AI
Marke Microchip Technology Microchip Technology
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $0,00 $6,60
Core AVR 8-bit RISC AVR 8-bit RISC
Max Clock Frequency 20 MHz —
Flash Program Memory 128 KB (64K x 16), In-System Programmable —
SRAM 16 KB —
EEPROM 4 KB —
Supply Voltage Range 2.7 V to 5.5 V 2.7V to 5.5V
Throughput Up to 20 MIPS at 20 MHz —
General Purpose I/O Lines 32 —
USARTs 2 —
Timer/Counters 3 (with compare modes and PWM) —
ADC 8-channel, 10-bit 8-channel 10-bit
Serial Interfaces TWI (I2C, byte-oriented), SPI, 2x USART —
Real Time Counter Yes (RTC) —
Working Registers 32 x 8 general purpose —
Instructions 131 instructions, most single-cycle —
Multiplier On-chip 2-cycle hardware multiplier —
Gehäuse 44-VQFN (7x7 mm), exposed pad 64-TQFP (14x14 mm)
Montageart Surface Mount Surface Mount
Debug / Programming ISP (In-Circuit Serial Programming), JTAG —
Life Cycle Stage Active —
Program Memory Size — 128KB (64K x 16) Flash
Program Memory Type — In-System Programmable FLASH
RAM Size — 4K x 8 SRAM
EEPROM Size — 4KB
Maximum Clock Speed — 8MHz
MIPS Throughput — Up to 8 MIPS at 8MHz (approx. 1 MIPS/MHz)
Timers — Two 8-bit, two 16-bit
Communication Interfaces — 2x USART, SPI, TWI (I2C)
Debug Interface — JTAG (on-chip debug and boundary scan)
Betriebstemperatur — -40C to +85C (industrial, A grade)
Number of I/O — 53 programmable I/O lines
RoHS-Status — [DATA_NEEDED: RoHS compliance confirmation]
MSL-Level — [DATA_NEEDED: moisture sensitivity level]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern