ATMEGA1284P-XPLD vs ATMEGA1284-AUR Vergleich
Detaillierter Direktvergleich von ATMEGA1284P-XPLD von Microchip Technology und ATMEGA1284-AUR von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATMEGA1284P-XPLD - AVR ATmega1284P Xplained Eval Kit | Microchip
ATMEGA1284P-XPLD ✓ AktivMicrochip Technology
ATMEGA1284-AUR - 8-Bit AVR MCU 128KB Flash 20MHz | Microchip
ATMEGA1284-AUR ✓ AktivSpezifikationsvergleich
| Parameter | ATMEGA1284P-XPLD | ATMEGA1284-AUR |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Development Boards | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $4,61 |
| Product Type | Evaluation Board (Development Board) | — |
| Target MCU | ATmega1284P 8-bit AVR RISC | — |
| Flash Memory | 128 KB ISP Flash (read-while-write) | — |
| EEPROM | 4 KB | 4 KB |
| SRAM | 16 KB | 16 KB |
| General Purpose I/O Lines | 32 | 32 |
| Working Registers | 32 general purpose | — |
| Instructions | 131 powerful instructions, most single-clock cycle | — |
| Max Throughput | 20 MIPS (fully static operation) | — |
| Timers | 3 flexible Timer/Counters with compare modes and PWM | — |
| USART | 2 | — |
| Serial Interfaces | Byte-oriented 2-wire interface (TWI), SPI | — |
| RTC | Real Time Counter included | — |
| Low Power Technology | picoPower technology | — |
| Programming Support | In-System Programming (ISP) | — |
| Kit Family | Xplained (AVR) | — |
| Core Architecture | Advanced RISC, 8-bit | 8-bit AVR RISC |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| Versorgungsspannung | [DATA_NEEDED: board supply voltage range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance] | Compliant |
| Program Memory Size | — | 128 KB ISP Flash (64K x 16) |
| Maximale Taktfrequenz | — | 20 MHz |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| Operating Voltage (Full 20 MHz) | — | 2.7 V to 5.5 V |
| General Purpose Working Registers | — | 32 |
| Instruction Set | — | 131 powerful instructions, most single-clock cycle |
| ADC | — | 8-channel, 10-bit successive approximation |
| USART Interfaces | — | 2 |
| Timer/Counters | — | 3 flexible timer/counters with compare modes and PWM |
| Gehäuse | — | 44-pin TQFP (10x10 mm) |
| Montageart | — | Surface Mount |
| Packaging | — | Tape & Reel |
| Lifecycle Stage | — | Active |