ATSAM4S8CA-CU vs ATSAM4SD16CA-CU Vergleich
Detaillierter Direktvergleich von ATSAM4S8CA-CU von Microchip Technology und ATSAM4SD16CA-CU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ AktivMicrochip Technology
ATSAM4SD16CA-CU - 120MHz Cortex-M4 MCU, 1MB Flash | Microchip
ATSAM4SD16CA-CU ✓ AktivSpezifikationsvergleich
| Parameter | ATSAM4S8CA-CU | ATSAM4SD16CA-CU |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,18 | $5,20 |
| Core Architecture | ARM Cortex-M4 | ARMv7E-M (Thumb-2 + DSP) |
| Core Width | 32-bit | — |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | — |
| SRAM | 128 KB | 160 KB |
| Instruction Cache | 2 KB | 2 KB |
| DSP Extensions | Yes (single-cycle MAC, hardware multiply) | — |
| Memory Protection Unit (MPU) | Yes | — |
| Instruction Set | Thumb-2, ARM Cortex-M4 | — |
| Supply Voltage (Vcc/Vdd) | 1.62 V to 3.6 V | — |
| Betriebstemperatur | -40 C to +85 C (Industrial) | — |
| Gehäuse | 100-pin TFBGA (9x9 mm) | 100-pin TFBGA (9x9 mm) |
| External Bus Interface (EBI) | 16-bit (SDRAM/SRAM/NAND/NOR) | — |
| USB | USB 2.0 Full-Speed, on-chip transceiver | USB 2.0 Full-Speed Device/Host |
| CAN | CAN 2.0A/B | Yes (1 controller) |
| ADC | 12-bit | 10/12-bit, multi-channel |
| Active Current | Approx. 30 mA at 100 MHz (per datasheet) | — |
| Back-up Mode Current (RTC, 1.8 V) | 3 uA | — |
| Pin-to-Pin Compatibility | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) | SAM3N, SAM3S, SAM4N, SAM7S (64/100-pin variants) |
| Montageart | Surface Mount | Surface Mount (BGA) |
| MSL-Level | [DATA_NEEDED: MSL Level] | [DATA_NEEDED: MSL level] |
| RoHS-Status | Compliant (per Heisener listing) | Compliant |
| Core | — | ARM Cortex-M4 |
| Maximum CPU Frequency | — | 120 MHz |
| Flash Memory | — | 1 MB (1024 KB) |
| ROM (Bootloader + IAP) | — | 16 KB |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Temperature Range | — | Industrial -40C to +85C |
| GPIO Count | — | [DATA_NEEDED: GPIO count from datasheet pin list] |
| Ethernet | — | EMAC (external PHY required) |
| UART/USART | — | Up to 10 |
| SPI | — | Yes (multiple controllers) |
| TWI (I2C) | — | Yes (multiple controllers) |
| Timers/PWM | — | 16-bit, multi-channel |
| DMA | — | Multi-channel DMA controller |
| Memory Protection Unit | — | Yes |