ATSAM4S8CB-CFN vs ATSAM4SA16CA-CU Vergleich

Detaillierter Direktvergleich von ATSAM4S8CB-CFN von Microchip Technology und ATSAM4SA16CA-CU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Microchip Technology
ATSAM4SA16CA-CU ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip

ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip

ATSAM4SA16CA-CU ✓ Aktiv

Spezifikationsvergleich

Parameter ATSAM4S8CB-CFN ATSAM4SA16CA-CU
Marke Microchip Technology Microchip Technology
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $4,74 $5,39
Core ARM Cortex-M4 with FPU —
Core Architecture ARM 32-bit RISC ARM Cortex-M4 with FPU and DSP
Maximale Taktfrequenz 120 MHz —
Program Memory (Flash) 512 KB (512K x 8) 1 MB (1024 KB)
SRAM 128 KB 160 KB
Supply Voltage Range 1.62 V to 3.6 V —
Operating Temperature (Industrial) -40C to +85C —
Operating Temperature (Green, MRL B) -40C to +105C —
Gehäuse 100-ball VFBGA, 7x7 mm, 0.65 mm pitch 100-pin TFBGA (9x9 mm)
Montageart Surface Mount (BGA) Surface Mount
USB USB 2.0 Full-Speed Device with on-chip transceiver —
CAN 2x CAN 2.0A/B controllers —
ADC 12-bit, up to 16 channels, 1 Msps —
DAC 2x 12-bit DAC —
Timers Multiple 16-bit and 32-bit timers, PWM, RTC —
Communication Interfaces UART/USART, SPI, TWI (I2C), I2S, USB, CAN USB 2.0 FS, EMAC 10/100, 4x USART, 3x TWI, 2x SPI, 1x HS-SPI
External Bus Interface 16-bit Static Memory Controller (EBI) 8-bit data, 24-bit address
Supply Current (Active, 100 MHz) approximately 30 mA —
Supply Current (Backup, RTC) approximately 3 uA at 1.8 V —
RoHS-Status Compliant Compliant
MSL (Moisture Sensitivity) MSL3 (per BGA package) —
Bit Width — 32-bit
Maximum CPU Frequency — 120 MHz
Instruction Cache — 2 KB
MPU (Memory Protection Unit) — Yes
GPIO Lines — 79
Betriebstemperatur — -40C to +85C (Industrial)
Versorgungsspannung — 1.2 V core / 3.3 V I/O (typical)
ADC Resolution — 12-bit
DAC Resolution — 12-bit
DMA Channels — Multi-channel DMA + Peripheral DMA Controller (PDC)
Instruction Set — Thumb-2, DSP extensions
Pin-to-Pin Compatibility — SAM3N, SAM3S (64/100-pin), SAM7S legacy

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern