ATSAM4SD16BA-ANR vs ATSAM4SD16BA-MU Vergleich
Detaillierter Direktvergleich von ATSAM4SD16BA-ANR von Microchip Technology und ATSAM4SD16BA-MU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAM4SD16BA-ANR - 1MB Flash Cortex-M4 MCU 120MHz | Microchip
ATSAM4SD16BA-ANR ✓ AktivMicrochip Technology
ATSAM4SD16BA-MU - 120MHz Cortex-M4 MCU 1MB Flash 64-QFN | Microchip
ATSAM4SD16BA-MU ✓ AktivSpezifikationsvergleich
| Parameter | ATSAM4SD16BA-ANR | ATSAM4SD16BA-MU |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,92 | $4,12 |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximale Taktfrequenz | 120 MHz | — |
| Core Mark Performance | 1.25 DMIPS/MHz (Dhrystone 2.1) | — |
| Flash Memory | 1024 KB (dual-bank, in-application programmable) | — |
| SRAM | 128 KB (plus 16 KB backup SRAM) | — |
| Supply Voltage (VDDIO/VDDCORE) | 1.62 V to 3.6 V | — |
| Gehäuse | 64-LQFP, 10 x 10 mm, 0.5 mm pitch (AN suffix) | 64-VFQFN Exposed Pad (9x9 mm) |
| I/O Pins | Up to 47 GPIO | — |
| ADC | 12-bit, up to 1 Msps, 16 channels | — |
| DAC | 12-bit, 2 channels | — |
| USB | USB 2.0 Full-Speed Device/Host/OTG | — |
| SD/MMC | 1 x High-Speed SD/MMC/SDIO | — |
| USART/UART | 6 x USART + 2 x UART | — |
| SPI | 2 x SPI (one with extended FIFO) | — |
| TWI (I2C-compatible) | 3 x TWI | — |
| External Bus Interface | 16-bit EBI (SRAM/SDRAM/NOR/NAND) | — |
| Timers | 3 x 16-bit TC + 1 x 16-bit RTT + 1 x RTC | — |
| Betriebstemperatur | -40 C to +105 C (industrial) | -40C to +85C (Industrial) |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| Core Processor | — | ARM Cortex-M4 |
| Core Size | — | 32-Bit Single-Core |
| Maximum Clock Speed | — | 120 MHz |
| Program Memory Size (Flash) | — | 1 MB (1M x 8) |
| Instruction Cache | — | 2 Kbytes |
| Memory Protection Unit (MPU) | — | Yes |
| DSP Instruction Set | — | Yes |
| Thumb-2 Instruction Set | — | Yes |
| I/O Count | — | 47 |
| Supply Voltage (Core) | — | 1.2 V |
| Supply Voltage (I/O) | — | 3.3 V |
| Pin-to-Pin Compatibility | — | SAM3N, SAM3S (64/100-pin), SAM7S legacy |