ATSAM4SD16CB-CFN vs ATSAM4S8CB-CFN Vergleich
Detaillierter Direktvergleich von ATSAM4SD16CB-CFN von Microchip Technology und ATSAM4S8CB-CFN von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAM4SD16CB-CFN - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SD16CB-CFN ✓ AktivMicrochip Technology
ATSAM4S8CB-CFN - 120MHz Cortex-M4 MCU, 512KB Flash, 100-VFBGA | Microchip
ATSAM4S8CB-CFN ✓ AktivSpezifikationsvergleich
| Parameter | ATSAM4SD16CB-CFN | ATSAM4S8CB-CFN |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,85 | $4,74 |
| Core Architecture | ARM Cortex-M4 (ARMv7-M) with FPU and DSP extensions | ARM 32-bit RISC |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 1 MB (1M x 8), dual-bank | 512 KB (512K x 8) |
| SRAM | 160 KB (100 KB SRAM0 + 60 KB SRAM1) | 128 KB |
| Gehäuse | 100-ball VFBGA (7x7 mm) | 100-ball VFBGA, 7x7 mm, 0.65 mm pitch |
| Versorgungsspannung | 1.2 V core / 3.3 V I/O (1.62-3.6 V I/O range) | — |
| Betriebstemperatur | -40C to +85C (extended industrial) | — |
| USB | USB 2.0 Full-Speed Device with on-chip PHY | USB 2.0 Full-Speed Device with on-chip transceiver |
| Ethernet | 10/100 GMAC (requires external PHY) | — |
| ADC | 12-bit, up to 24 channels, 1 Msps | 12-bit, up to 16 channels, 1 Msps |
| Communication Peripherals | 5x USART/UART, 3x TWI (I2C), 2x SPI, 1x HS-SPI, 1x I2S, 1x CAN 2.0B | — |
| External Bus Interface | 16-bit EBI (SRAM, SDRAM, NAND Flash) | 16-bit Static Memory Controller (EBI) |
| Timers | 9x 16-bit TC channels, 3x 3-channel 32-bit TC, RTC, SysTick | Multiple 16-bit and 32-bit timers, PWM, RTC |
| DMA | 24-channel peripheral DMA controller | — |
| Security | AES 256-bit, secure boot, Flash CRC, tamper detection | — |
| Montageart | Surface Mount (BGA, reflow only) | Surface Mount (BGA) |
| MSL-Level | 3 (168 hours) | — |
| RoHS-Status | Compliant | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Maximale Taktfrequenz | — | 120 MHz |
| Supply Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature (Industrial) | — | -40C to +85C |
| Operating Temperature (Green, MRL B) | — | -40C to +105C |
| CAN | — | 2x CAN 2.0A/B controllers |
| DAC | — | 2x 12-bit DAC |
| Communication Interfaces | — | UART/USART, SPI, TWI (I2C), I2S, USB, CAN |
| Supply Current (Active, 100 MHz) | — | approximately 30 mA |
| Supply Current (Backup, RTC) | — | approximately 3 uA at 1.8 V |
| MSL (Moisture Sensitivity) | — | MSL3 (per BGA package) |