ATSAMA5D27C-D1G-CU vs ATSAMA5D27-SOM1-EK1 Vergleich
Detaillierter Direktvergleich von ATSAMA5D27C-D1G-CU von Microchip Technology und ATSAMA5D27-SOM1-EK1 von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMA5D27C-D1G-CU - Cortex-A5 MPU 500MHz 1Gbit DDR2 | Microchip
ATSAMA5D27C-D1G-CU ✓ AktivMicrochip Technology
ATSAMA5D27-SOM1-EK1 - SAMA5D27 ARM Cortex-A5 500MHz Eval Kit
ATSAMA5D27-SOM1-EK1 ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMA5D27C-D1G-CU | ATSAMA5D27-SOM1-EK1 |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Development Boards |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $19,10 | $148,88 |
| Core Architecture | ARM Cortex-A5 (ARMv7-A) | — |
| Core Count | 1 | — |
| Maximum CPU Clock | 500 MHz | — |
| Bit Width | 32-bit | — |
| Integrated Memory | 1 Gbit DDR2 SDRAM (16-bit data bus) | — |
| Versorgungsspannung | 3.3 V I/O | — |
| Core Voltage | 1.2 V | — |
| Gehäuse | 289-TFBGA (14x14 mm), 0.8 mm ball pitch | — |
| Montageart | Surface Mount (BGA) | Through-hole / desktop development board |
| Ethernet | 10/100 Mbps (1x EMAC, external PHY) | — |
| USB | USB 2.0 High-Speed with HSIC | — |
| Betriebstemperatur | Industrial (-40C to +85C) | — |
| RoHS-Status | Compliant (Green, BGA GREEN) | Compliant |
| Packaging | Tray | — |
| Series | SAMA5D2 SiP | — |
| Product Type | — | Embedded Evaluation Board / Development Kit |
| Target Module | — | ATSAMA5D27-SOM1 |
| Embedded SiP | — | ATSAMA5D27C-D1G-CU (Cortex-A5 + 1-Gbit DDR2) |
| Processor Core | — | ARM Cortex-A5 |
| Maximum Core Frequency | — | 500 MHz |
| DDR2 SDRAM | — | 1 Gbit (128 MB) on SiP |
| NOR Flash | — | 64 Mbit |
| EEPROM | — | 1 Kbit |
| Operating System Support | — | Linux, RTOS (Buildroot, Yocto, mainline Linux) |
| Debug Interface | — | On-board debugger, JTAG/SWD headers |
| Connectivity | — | USB Host/Device, GMII/RGMII Ethernet expansion, CAN, SD/MMC x2, mikroBUS x2, Audio codec, LCD/touch connector |
| Expansion Headers | — | 0.1-inch headers mapping SAMA5D2 peripheral pins |
| Documentation | — | 60-page SAMA5D27 SOM1 Kit1 User's Guide |