ATSAMA5D2B-XULT vs ATSAMA5D35-EK Vergleich
Detaillierter Direktvergleich von ATSAMA5D2B-XULT von Microchip Technology und ATSAMA5D35-EK von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMA5D2B-XULT - SAMA5D2 Xplained Ultra Kit | Microchip
ATSAMA5D2B-XULT ObsoleteMicrochip Technology
ATSAMA5D35-EK - SAMA5D35 Cortex-A5 536MHz MPU Evaluation Kit
ATSAMA5D35-EK ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMA5D2B-XULT | ATSAMA5D35-EK |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Development Boards | Development Boards |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $142,50 | $629,00 |
| Product Type | Embedded MPU Evaluation Board / Xplained Ultra Kit | MPU Evaluation Board / Development Kit |
| Featured MPU | ATSAMA5D27B (SAMA5D2 family, ARM Cortex-A5) | — |
| MPU Core | ARM Cortex-A5, 32-bit, single-core | — |
| MPU Clock Speed | Up to 500 MHz | — |
| MPU Package (SiP) | 289-ball BGA | — |
| On-Package Memory | 128 MB DDR2 | — |
| External Flash | QSPI NOR flash (on-board) | — |
| Ethernet | 10/100 Mbps with on-board PHY | 2x 10/100/1000 Mbps MAC (GMII/RGMII), IEEE 1588 |
| USB Interfaces | USB 2.0 host + USB 2.0 device | — |
| SD/MMC | microSD socket + 4-bit SD/MMC interface | — |
| CAN Interfaces | 2 x CAN-FD | — |
| Expansion | Arduino R3, Xplained Pro, mikroBUS | — |
| Display | 24-bit TFT LCD connector | — |
| Pre-flashed OS | Linux demonstration image | — |
| RoHS-Status | Compliant | Compliant |
| MPU Series | — | SAMA5D3 (ARM Cortex-A5) |
| Core Processor | — | ARM Cortex-A5 32-bit |
| Maximum CPU Clock | — | 536 MHz |
| Performance | — | 850 DMIPS |
| Internal SRAM | — | 128 KB |
| L1 Instruction Cache | — | 32 KB |
| L1 Data Cache | — | 32 KB |
| Floating Point Unit | — | Yes (VFPv4 + NEON) |
| On-board DRAM | — | 512 MB DDR2 |
| Flash Memory | — | 256 MB NAND + 16 MB NOR + 4 MB SPI DataFlash + 64 KB EEPROM |
| USB | — | 2x USB 2.0 High-Speed Host + 1x USB 2.0 High-Speed Device |
| CAN | — | 2x CAN-FD controllers |
| LCD Controller | — | Integrated, supports up to 1920x1080 (HDMI bridge on board) |
| Cryptography | — | AES, SHA, TRNG hardware accelerators |
| Low-Power Mode Consumption | — | < 0.5 mW |
| Operating Temperature (industrial variants) | — | -40 C to +105 C |
| MPU Package (silicon) | — | 324-ball BGA, 12 x 12 mm, 0.5 mm pitch |
| Board Form Factor | — | SAMA5D3-EK baseboard + SAMA5D35 module |
| Software Support | — | Linux (mainline kernel, Yocto, Buildroot), SAM-BA bootloader, bare-metal |
| Kit Contents | — | Board, cables, power supply |
| Lead-Free | — | Yes |