ATSAME54P19A-AU-EFP vs ATSAME54-XPRO Vergleich
Detaillierter Direktvergleich von ATSAME54P19A-AU-EFP von Microchip Technology und ATSAME54-XPRO von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAME54P19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAME54P19A-AU-EFP ✓ AktivMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ AktivSpezifikationsvergleich
| Parameter | ATSAME54P19A-AU-EFP | ATSAME54-XPRO |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Development Boards |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,10 | $80,40 |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz | — |
| Program Flash Memory | 512 KB (dual-panel with ECC) | — |
| SRAM | 128 KB (with ECC) | 256 KB with ECC (on target MCU) |
| Gehäuse | 128-pin TQFP (14x14 mm) | — |
| Supply Voltage (VDD) | 1.71 V to 3.63 V | — |
| Betriebstemperatur | -40 C to +85 C (industrial) | — |
| USB | USB 2.0 Full-Speed with embedded PHY | — |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 (external PHY required) | — |
| CAN | CAN-FD | — |
| ADC | 12-bit, up to 1 Msps | — |
| DAC | 12-bit | — |
| Crypto Accelerator | AES, TRNG | — |
| DMA Channels | 32 (8 channels x 4 priority levels x 2 instances) | — |
| SERCOM Modules | Up to 6 (UART/SPI/I2C configurable) | — |
| RoHS-Status | ROHS3 Compliant | Compliant |
| Product Type | — | Evaluation Kit / Development Board |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |