ATSAME54P20A-AFT vs ATSAME54P20A-CTUT-EFP Vergleich
Detaillierter Direktvergleich von ATSAME54P20A-AFT von Microchip Technology und ATSAME54P20A-CTUT-EFP von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAME54P20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME54P20A-AFT ✓ AktivMicrochip Technology
ATSAME54P20A-CTUT-EFP - SAM E54 MCU 120MHz 1MB Flash | Microchip
ATSAME54P20A-CTUT-EFP ✓ AktivSpezifikationsvergleich
| Parameter | ATSAME54P20A-AFT | ATSAME54P20A-CTUT-EFP |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,14 | $6,10 |
| Core Architecture | ARM Cortex-M4F with single-precision FPU | ARM Cortex-M4F with FPU and DSP extensions |
| Maximum CPU Clock | 120 MHz | — |
| Flash Memory | 1 MB (dual-panel with ECC) | — |
| SRAM | 256 KB (with ECC) | 256 KB with ECC |
| Gehäuse | 128-pin TQFP (14x14 mm) | 120-TFBGA (8x8 mm, 0.5 mm pitch) |
| Supply Voltage (VDDIO) | 3.3 V typical | — |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 | 10/100 Mbps MAC (requires external PHY) |
| USB | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed with on-chip PHY |
| CAN | 2x CAN-FD controllers | — |
| ADC | 12-bit, up to 1 Msps | 12-bit, up to 1 Msps |
| Betriebstemperatur | -40C to +125C (extended) | — |
| Montageart | Surface Mount | Surface Mount (BGA) |
| MSL-Level | 3 (168 hours) | MSL3 |
| RoHS-Status | Compliant | Compliant |
| Supply Form | Tape & Reel (T&R) | Tape & Reel (CTUT suffix) |
| Maximale Taktfrequenz | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (1M x 8) with ECC, dual-bank |
| Operating Voltage Range | — | 1.71 V to 3.6 V |
| GPIO Count | — | [DATA_NEEDED: GPIO count] |
| CAN Controllers | — | 2x CAN-FD |
| SERCOM Channels | — | Configurable UART/SPI/I2C (up to 8 channels) |
| External Bus Interface | — | Quad/Octal SPI, Parallel Capture Controller |
| Betriebstemperaturbereich | — | -40 C to +85 C (industrial) |