ATSAME70Q20A-CN vs ATSAME70Q19A-CN Vergleich
Detaillierter Direktvergleich von ATSAME70Q20A-CN von Microchip Technology und ATSAME70Q19A-CN von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAME70Q20A-CN - 300MHz Cortex-M7 MCU 1MB Flash LFBGA-144 | Microchip
ATSAME70Q20A-CN ✓ AktivMicrochip Technology
ATSAME70Q19A-CN - 300MHz Cortex-M7 MCU 512KB Flash LFBGA-144 | Microchip
ATSAME70Q19A-CN ✓ AktivSpezifikationsvergleich
| Parameter | ATSAME70Q20A-CN | ATSAME70Q19A-CN |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,93 | $6,68 |
| Core Architecture | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU (single + double precision) |
| Maximum Clock Speed | 300 MHz | — |
| Program Memory (Flash) | 1024 KB (1 MB) | — |
| SRAM | 384 KB (includes 128 KB TCM) | 256 KB |
| Versorgungsspannung | 1.8V / 2.5V / 3.3V | — |
| Betriebstemperatur | -40C to +85C (Industrial) | -40C to +105C (industrial) |
| Gehäuse | 144-pin LFBGA (10x10 mm) | 144-LFBGA (10x10 mm, 0.8 mm pitch) |
| GPIO Count | [DATA_NEEDED: GPIO count] | — |
| ADC | 12-bit, up to 1.7 Msps | 12-bit, up to 2 Msps |
| USB | USB 2.0 High-Speed with on-chip PHY | USB 2.0 High-Speed Host + Device with on-chip PHY |
| CAN | 2x CAN-FD controllers | 2x CAN-FD controllers |
| Ethernet | 10/100 MAC with 1588 PTP | 10/100 Mbps MAC (GMAC) with 1588 PTP |
| External Bus Interface (EBI) | 16-bit (SDRAM, NAND, SRAM) | Yes (SDRAM, SRAM, NAND support) |
| Crypto Acceleration | AES, TRNG, Secure Boot | — |
| Montageart | Surface Mount (BGA) | Surface Mount (BGA) |
| MSL-Level | [DATA_NEEDED: MSL rating] | 3 |
| RoHS-Status | Compliant | Compliant |
| Tray Quantity | [DATA_NEEDED: tray quantity] | — |
| Maximum CPU Clock | — | 300 MHz |
| Flash Memory | — | 512 KB |
| Operating Voltage (VDDCORE) | — | 1.2 V (typical) |
| I/O Voltage (VDDIO) | — | 3.3 V (typical) |
| DAC | — | 12-bit |
| Serial Interfaces | — | 3x FLEXCOM (USART/SPI/TWI), 2x I2S, 2x SPI high-speed |
| DMA Channels | — | 24 (XDMAC) |
| Crypto Accelerator | — | AES, SHA, TRNG hardware blocks |