ATSAMG55J19B-AUT vs ATSAMG55J19B-MUT Vergleich
Detaillierter Direktvergleich von ATSAMG55J19B-AUT von Microchip Technology und ATSAMG55J19B-MUT von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATSAMG55J19B-AUT - ARM Cortex-M4 MCU 120MHz 512KB LQFP-64
ATSAMG55J19B-AUT ✓ AktivMicrochip Technology
ATSAMG55J19B-MUT - 120MHz Cortex-M4 MCU, 512KB Flash | Microchip
ATSAMG55J19B-MUT ✓ AktivSpezifikationsvergleich
| Parameter | ATSAMG55J19B-AUT | ATSAMG55J19B-MUT |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,42 | $5,74 |
| Core Architecture | ARM Cortex-M4 with single-precision FPU | ARM Cortex-M4 with FPU (single-precision) and DSP extensions |
| Maximale Taktfrequenz | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | 512 KB (512K x 8) |
| SRAM | 176 KB | 176 KB |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| Gehäuse | 64-pin LQFP (10x10 mm) | 64-QFN MRLB, 7.5 x 7.5 mm with exposed pad |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40C to +85C (Industrial) | — |
| Datenbusbreite | 32-bit | — |
| Number of I/O Pins | Up to 47 (per datasheet) | — |
| USB Interface | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| Audio Interface | I2S (digital audio) | I2S / SSC (Synchronous Serial Controller) |
| ADC | 12-bit, 16-channel (per datasheet) | — |
| Timers/PWM | 16-bit timers, PWM channels (per datasheet) | — |
| Communication Peripherals | USART, SPI, TWI/I2C | — |
| DMA | Peripheral DMA controller | — |
| RoHS-Status | Compliant | Compliant |
| Delivery Form | Tape & Reel (AUT suffix) | — |
| Series | SAM G55 | — |
| Silicon Revision | B | — |
| Maximum CPU Frequency | — | 120 MHz |
| ROM (Boot Loader) | — | 8 KB |
| Versorgungsspannung | — | 1.62 V to 3.6 V (single supply) |
| Betriebstemperatur | — | -40 C to +85 C (Industrial, MUT suffix) |
| GPIO Count | — | Up to 47 |
| USB | — | USB 2.0 Full-Speed Device with on-chip transceiver |
| Oscillators | — | 3 to 20 MHz crystal/ceramic resonator + 3 internal RC oscillators |
| Boot Loader | — | Embedded, supports Flash programming |
| Watchdog Timer | — | Yes |
| Power-on Reset / Brown-out Detector | — | Yes |
| MSL-Level | — | MSL3 (per JEDEC J-STD-020) |