BSD214SNH6327XTSA1 vs BSP742RIXUMA1 Vergleich
Detaillierter Direktvergleich von BSD214SNH6327XTSA1 von Infineon und BSP742RIXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSD214SNH6327XTSA1 | BSP742RIXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | MOSFETs | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,27 | $0,96 |
| FET Type | N-Channel | — |
| Technology | MOSFET (Metal Oxide), OptiMOS | — |
| Drain-to-Source Voltage (Vdss) | 20 V | — |
| Continuous Drain Current (Id) at 25C | 1.5 A | — |
| Power Dissipation (Pd) at Ta | 500 mW | — |
| Gate Drive Voltage (Rds On rated) | 2.5 V, 4.5 V | — |
| Rds On (Max) @ Vgs=4.5V | [DATA_NEEDED: Rds On at Vgs=4.5V] | — |
| Rds On (Max) @ Vgs=2.5V | [DATA_NEEDED: Rds On at Vgs=2.5V] | — |
| Vgs(th) (typical) | [DATA_NEEDED: Vgs threshold typical] | — |
| Gehäuse | SOT-363 (PG-SOT363-PO), 6-pin | PG-DSO-8-6 (SOIC-8, 3.90 mm body) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -55C to +150C (junction) | -40 °C to +150 °C |
| Automotive Qualification | AEC-Q101 qualified | — |
| Lead Plating | Pb-free | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 1 | [DATA_NEEDED: MSL rating] |
| Standard Pack Quantity | 3000 (Tape & Reel) | — |
| Product Type | — | Smart High-Side Power Switch |
| Topologie | — | 1:1 N-Channel High-Side |
| Family | — | miniPROFET |
| Output Current (Nominal) | — | 400 mA |
| RDS(on) Typical at 25°C | — | 250 mΩ |
| Betriebsversorgungsspannung | — | 5 V to 34 V |
| Load Dump Tolerance | — | 41 V |
| Reverse Battery Protection | — | -16 V |
| On-State Resistance (max) | — | [DATA_NEEDED: RDS(on) maximum at 25°C] |
| Strombegrenzung | — | [DATA_NEEDED: current limit typical value] |
| Thermisches Abschalten | — | Yes with auto restart |
| Overvoltage Protection | — | Yes (including load dump) |
| Short Circuit Protection | — | Yes |
| Open Load Detection | — | Yes (diagnostic pin) |
| Demagnetization of Inductive Loads | — | Yes (internal) |