BSP742RIXUMA1 vs BTS3046SDRATMA1 Vergleich
Detaillierter Direktvergleich von BSP742RIXUMA1 von Infineon und BTS3046SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP742RIXUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,96 | $0,74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Topologie | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Betriebsversorgungsspannung | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Strombegrenzung | [DATA_NEEDED: current limit typical value] | — |
| Thermisches Abschalten | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Gehäuse | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 C to +150 C |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |