BSP752RXUMA2 vs BTS4140NHUMA1 Vergleich
Detaillierter Direktvergleich von BSP752RXUMA2 von Infineon und BTS4140NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP752RXUMA2 | BTS4140NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $0,58 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | High-side, 1:1 N-channel | 1:1 N-Channel High-Side |
| Continuous Load Current | 1.3 A | 200 mA |
| On-State Resistance (RON) | [DATA_NEEDED: typical RON value in ohms at 25C] | — |
| Supply Voltage Range (Vbb) | [DATA_NEEDED: Vbb min/max operating range] | — |
| Load Dump Protection | Yes (integrated) | — |
| Overload Protection | Yes (current limitation) | — |
| Short Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Reverse Battery Protection | Yes | — |
| Open-Load Detection (OFF state) | Yes (via external resistor) | — |
| Status Feedback Pin | Yes | — |
| Fast Demagnetization | Yes (for inductive loads) | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | -40 C to +150 C (Tj) |
| Gehäuse | PG-DSO-8-6 (DSO-8-6) | PG-SOT223-4 (TO-261-4) |
| Montageart | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive grade) | — |
| RoHS-Status | Compliant | Compliant |
| Number of Channels | — | 1 |
| On-Resistance (Ron, typ @ 25 C) | — | 1.2 ohm |
| Operating Voltage Range | — | 6 V to 62 V |
| Load Dump Tolerance | — | Yes (overvoltage protection) |
| Input Type | — | Current-controlled CMOS-compatible |
| Diagnostic Output | — | Status flag (active low in fault) |
| Protection Features | — | Current limit, short-circuit shutdown, thermal shutdown, overvoltage (load dump), undervoltage shutdown |
| Inductive Load Clamping | — | Integrated (internal Vds clamp) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |