BSP78HUMA1 vs ITS4100SSJNXUMA1 Vergleich
Detaillierter Direktvergleich von BSP78HUMA1 von Infineon und ITS4100SSJNXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP78HUMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,62 | $0,89 |
| Technology | Smart SIPMOS (N-channel vertical power FET) | — |
| Funktion | Self-protected low-side power switch | — |
| Operating Supply Voltage (Vbb) | 4.5 V to 42 V | — |
| Continuous Load Current | Up to 3 A | — |
| On-state Resistance (Rds(on)) | 200 mΩ typical | — |
| Input Logic Level | Logic-level (3.3 V / 5 V compatible) | — |
| Current Limitation | Yes (internal) | Yes |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Short-circuit Protection | Yes | — |
| Overload Protection | Yes | Yes |
| ESD Protection | Yes (on input pin) | — |
| Diagnostic Output | Open-drain status flag | — |
| Betriebs-Sperrschichttemperatur | -40 °C to +150 °C | — |
| Gehäuse | PG-SOT223-4 (TO-261-4) with exposed tab | PG-DSO-8 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified | Yes (Automotive Grade) |
| RoHS-Status | Compliant (Green product) | Compliant |
| Product Type | — | High-Side Power Switch |
| Topologie | — | 1:1 N-Channel High-Side |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| Betriebstemperaturbereich | — | [DATA_NEEDED: Tj range] |