BTS3028SDRATMA1 vs BTG7003A1EPWXUMA2 Vergleich
Detaillierter Direktvergleich von BTS3028SDRATMA1 von Infineon und BTG7003A1EPWXUMA2 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktivSpezifikationsvergleich
| Parameter | BTS3028SDRATMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,92 | $2,20 |
| Product Type | Smart Low-Side Power Switch | — |
| Topologie | 1:1 N-Channel, single channel | — |
| Ausgangsstrom (max.) | 5 A | — |
| On-Resistance RDS(ON) | 28 mΩ (typ.) | — |
| Load Voltage (max) | 60 V (load-dump rated) | — |
| Betriebsversorgungsspannung | 5 V to 28 V (typ. 13.5 V) | — |
| Logic Input Voltage (IN) | Logic-level, 3.3 V/5 V compatible | — |
| Gehäuse | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) | PG-TSDSO-14-22 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 °C to +150 °C (junction) | -40C to +150C (TJ) |
| Protection Features | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss | — |
| Status Output | Open-drain diagnostic flag | — |
| Automotive Qualification | AEC-Q100 | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Switch Type | — | High-Side Power Switch |
| Number of Channels | — | 1 |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Operating Voltage Range | — | 6 V to 18 V |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |