BTS3035TFATMA1 vs BTS3028SDRATMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und BTS3028SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | BTS3028SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $0,92 |
| Product Type | Low-Side Power Switch | Smart Low-Side Power Switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | — |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Topologie | — | 1:1 N-Channel, single channel |
| Ausgangsstrom (max.) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| Betriebsversorgungsspannung | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| Betriebstemperatur | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Status Output | — | Open-drain diagnostic flag |
| Automotive Qualification | — | AEC-Q100 |