BTS3035TFATMA1 vs BTS3050EJXUMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und BTS3050EJXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | BTS3050EJXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $0,86 |
| Product Type | Low-Side Power Switch | Smart Low-Side Power Switch |
| Technology | N-Channel MOSFET | N-Channel Vertical Power MOSFET (HITFET +12V) |
| Number of Channels | 1 | 1 (Single channel) |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | [DATA_NEEDED: Tj range] |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-TDSO-8-31 (TDSO8-31) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS-Status | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | AEC-Q100 qualified (HITFET +12V family) |
| On-State Resistance (RDS(on)) | — | 50 mΩ (typical at 25 °C) |
| Continuous Load Current | — | 4 A |
| Topologie | — | Low-Side Switch (1:1) |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb max rating] |
| Load Voltage | — | 12 V automotive nominal |
| ESD Protection | — | Yes (on IN pin / Source / Ground) |
| Thermal Protection | — | Auto-restart overtemperature shutdown |
| Strombegrenzung | — | [DATA_NEEDED: ILIM value] |