BTS3046SDRATMA1 vs BTS4142NHUMA1 Vergleich
Detaillierter Direktvergleich von BTS3046SDRATMA1 von Infineon und BTS4142NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3046SDRATMA1 | BTS4142NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $0,97 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | Smart High-Side Power Switch (Classic PROFET 24V) |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | — |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Gehäuse | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-SOT223-4 |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | — |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | — |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Number of Channels | — | 1 |
| Switch Topology | — | High-side, N-channel vertical MOSFET |
| Nominal Output Current | — | 1.4 A |
| On-State Resistance (RDS(on)) | — | 70 mOhm (typical) |
| Betriebsversorgungsspannung | — | 6 V to 42 V |
| Load-Dump Protection | — | Yes (integrated overvoltage clamp) |
| Overload Protection | — | Yes (current limiting) |
| Thermal Protection | — | Yes (shutdown with auto-restart) |
| Undervoltage Shutdown | — | Yes (auto-restart with hysteresis) |
| ESD Protection (Input Pin) | — | Yes |
| Diagnostic Feedback | — | Yes (open-load, fault) |
| Betriebstemperatur | — | -40C to +150C (junction) |
| RoHS-Status | — | Compliant |