BTS3046SDRATMA1 vs IFX9201SGAUMA1 Vergleich
Detaillierter Direktvergleich von BTS3046SDRATMA1 von Infineon und IFX9201SGAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3046SDRATMA1 | IFX9201SGAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,74 | $2,05 |
| Product Type | Smart Low-Side Power Switch (HITFET family) | — |
| Manufacturer | Infineon Technologies | — |
| Switch Configuration | 1:1 N-Channel, single channel | — |
| Continuous Output Current | 3.6 A | 6 A |
| On-State Resistance (Rds(on)) | 95 mOhm (0.095 ohm) typical | — |
| Operating Voltage Range (Vbb) | 4.5 V to 42 V | — |
| Load Type | Low-side switch (ground-referenced load) | — |
| Gehäuse | PG-TO252-3-11 (DPAK, 3-pin with tab) | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 C to +150 C | — |
| Protection Features | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD | UVLO, OCP, OTP, short-circuit, open-load detection |
| Input Logic | CMOS-compatible with internal pull-down | — |
| Status Feedback | Yes (status output pin) | — |
| Automotive Qualification | AEC-Q100 (where variant specified) | — |
| RoHS / Lead-Free | Compliant / Yes | — |
| Topologie | — | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range | — | 5 V to 36 V |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| PWM Frequency (max) | — | 25 kHz |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| MSL-Level | — | [DATA_NEEDED: MSL level] |
| RoHS-Status | — | Compliant |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |