BTS3125TFATMA1 vs BTS3050TFATMA1 Vergleich
Detaillierter Direktvergleich von BTS3125TFATMA1 von Infineon und BTS3050TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3125TFATMA1 | BTS3050TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,54 | $1,02 |
| Product Type | Single-channel N-channel low-side smart power switch | — |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| Wärmewiderstand, Sperrschicht-Umgebung | [DATA_NEEDED: theta_JA value] | — |
| Betriebstemperaturbereich | -40°C to +150°C | — |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| Gehäuse | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3-313 (TO-252 / DPAK) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS-Status | Compliant | — |
| Part Number | — | BTS3050TFATMA1 |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | HITFET Smart Low-Side Switch |
| Switch Type | — | N-Channel Low-Side Smart Power Switch |
| Anzahl der Ausgänge | — | 1 |
| RDS(on) (typ) | — | 44 mOhm at 25 C |
| Continuous Drain Current | — | 4 A |
| Load Voltage (max) | — | 5.5 V |
| Logic Input | — | CMOS compatible, logic-level |
| Status Output | — | Yes (fault feedback) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, ESD |
| Betriebstemperatur | — | -40 C to +150 C (junction) |
| AEC-Q100 | — | Qualified |
| RoHS | — | Compliant |