BTS428L2ATMA1 vs BTS134DATMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2ATMA1 von Infineon und BTS134DATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2ATMA1 | BTS134DATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $0,66 |
| Product Type | Smart High-Side Power Switch | — |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | Smart SIPMOS (vertical DMOS + protection IC) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Betriebsversorgungsspannung | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-11 (DPAK, 2 leads + tab, SC-63) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: min/max] | [DATA_NEEDED: TJ min/max -40C to +150C is typical for HITFET] |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Manufacturer | — | Infineon Technologies |
| Product Series | — | HITFET (BTS134) |
| Switch Type | — | N-Channel Low-Side Smart Power Switch |
| Ausgangskonfiguration | — | Low-Side |
| Continuous Drain Current (ID) | — | 3.5 A |
| Operating Voltage (VLoad) | — | 42 V (max) |
| Drain-Source Voltage (VDS) | — | 42 V |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at VGS=5V, TJ=25C] |
| Input Logic Threshold (VIH/VIL) | — | Logic-level (3.3 V / 5 V compatible GPIO) |
| ESD Protection (Input Pin) | — | Yes (embedded) |
| Thermisches Abschalten | — | Yes (auto-restart) |
| Current Limitation | — | Yes |
| Overload Protection | — | Yes |
| Short-Circuit Protection | — | Yes |
| Overvoltage Protection (Load Dump) | — | Yes |
| Automotive Qualification | — | AEC-Q100 (per Arrow listing) |
| RoHS-Status | — | Compliant (Green product) |
| Packing | — | Tape & Reel (T&R) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |