BTS5215LAUMA1 vs BTS70202EPAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS5215LAUMA1 von Infineon und BTS70202EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS5215LAUMA1 | BTS70202EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,18 | $1,62 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (dual channel) |
| Number of Channels | 2 | 2 |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | 3.3 V and 5 V CMOS |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Gehäuse | PG-DSO-12-9 | PG-TSDSO-14-22 (exposed pad) |
| Betriebstemperatur | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | — |
| RoHS-Status | Compliant | Compliant |
| Technology | — | SMART7 (PROFET family) |
| Ausgangskonfiguration | — | High-side, 1:1 N-Channel MOSFET per channel |
| Continuous Load Current (per channel) | — | 2.5 A |
| Total Device Load Current | — | 5 A |
| On-State Resistance (typ, per channel) | — | 30 mΩ |
| Operating Voltage Range (Vbb) | — | 6 V to 18 V (load dump tolerant) |
| Current Limit (typ) | — | 12 A (selectable) |
| Diagnostic Output | — | Analog current sense (IS pin) per channel |
| Montageart | — | Surface Mount |
| Betriebstemperaturbereich | — | -40 C to +150 C (junction) |
| Packing | — | Tape & Reel (XUMA1 suffix) |